Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: SATA 15 Pin male to Molex 4 pin female adaptor
Easy migration to SATA power
Convert an existing SATA power connector to molex power connector
Features: This cable adapter converts a molex 4-pin female to SATA power connector for powering your SATA hard drives.
Specifications: ESATA AND SATA II BRACKET
Type: eSATA and SATA II Combo Bracket cable (Internal SATA to eSATA and SATA II)
Ports: 1 External eSATA Port and 1 External SATA II Port
Conductor: 26 AWG
Features: 1 – Port eSATA and 1 – Port SATA II Combo Bracket
Supports hot-plug (Motherboard must support)
3.0 GB/s Transfer rate
eSATA I-Type connector
Easy way to upgrade & expand storage
Specifications: ESATA BRACKET 1 PORTS
Type: eSATA Bracket cable (Internal SATA to eSATA)
Ports: 1 External eSATA Port
Conductor: 26 AWG
Features: 1 – Port eSATA Bracket
Supports hot-plug (Motherboard must support)
3.0 GB/s Transfer rate
eSATA I-Type connector
Easy way to upgrade & expand storage
Specifications: Type: eSATA Bracket cable (Internal SATA to eSATA)
Ports: 2 External eSATA Port
Conductor: 26 AWG
Features: 2 – Port eSATA Bracket
Supports hot-plug (Motherboard must support)
3.0 GB/s Transfer rate
eSATA I-Type connector
Easy way to upgrade & expand storage
Specifications: Upgrade your desktop system to an high speed SSD with the latest SATA III interface (6Gbs)
Uses a single PCIe 2.0 x1 slot for data transfer speeds of up to 400 MB/sec
2.5" SSD connects via SATA III interface
Additional Auxiliary SATA III connector for expansion to another drive
Features: Compatible with 2.5" SATA III and SATA II SSDs and hard drives
Uses a single PCIe 2.0 x1 slot for data transfer speeds of up to 400 MB/sec
Auxiliary SATA III port for additional expansion to any hard drive or SSD
Ideal for use as a boot disk or scratch disk
Includes Apricorn's EZ Gig Cloning Software with Data Select
Macs clone using Apple's Built-in Disk Utility
TRIM Compatible and can access capacities in excess of 2.2TB
Fits Standard Desktop Systems (not compatible with low profile systems...
Specifications: Interface: IDE to SATA
Cable Length: 18.11" (460mm)
Features: Converts IDE Devices (Hard Drive, CD-ROM, CD-RW, DVD ROM, DVD + RW, etc…) to Serial ATA Connection
Supports ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, and IDE Devices
Compliant with ATA Specifications
Compliant with Serial ATA Gen 1.0
1 IDE Input Port
1 SATA Output Port
Specifications: SATA 15 Pin male to Molex 4 pin female adaptor
Easy migration to SATA power
Convert an existing SATA power connector to molex power connector
Features: This cable adapter converts a molex 4-pin female to SATA power connector for powering your SATA hard drives.
Features: Unique bi-directional SATA – IDE converter
Supports 3.5-inch SATA and IDE (ATA) hard drive
Supports 5.25-inch SATA and IDE (ATA) optical drives
Power-On and HDD-Activity LED indicators
Ultra low power consumption
Connectors: one IDE (ATA) connector, one SATA host connector (Yellow), one SATA device connector (Black) and one 4-pin FDD power connector
Two independent Ultra ATA channels with 128/256 bytes buffer per channel
Driverless. No driver is needed
Serial ATA Interface
Complies with SATA 1.0a specification
Supports SATA Generation 1 with transfer rate up to 1.5Gbps (150MB/s)
Supports Spread Spectrum in receiver
Supports SATA power saving mode: Partial and Slumber
IDE (ATA) Interface
Complies with ATA Specification
Complies with Ultra ATA 133 with transfer rate up to 133MB/s
Supports PIO mode o, 1, 2, 3, 4, 5, ...
Specifications: Connectors:
1 x 44-pin IDE Female Input Port
1 x 40-pin IDE Male Output Ports
Use: Connects your 2.5in notebook IDE hard drive to a 40-pin IDE cable
Features: Works for ALL LAPTOPS HARD DRIVE including DELL, SONY, IBM, Toshiba, HP, COMPAQ, Fujitsu and much more
Easily create Ghost images of your laptop (keep in mind that it is much harder to create Ghost Images from laptop itself)
Transfer data from laptop drive to a desktop drive the quickest way
The best accessory for laptop data backup and recovery
This adapter allows you to connect a laptop hard drive to a desktop IDE cable. The laptop hard drive can then be detected and used as a regular IDE drive.
Please be careful of the direction of fitting RCW-616 to your ATA device. You could bend and damage the pins on it by i...
Specifications: Serial ATA II at 3Gbps
Compliant with Serial ATA 1.0 specification
Automatic SATA 3Gbps speed negotiation
Supports PIO Mode 0-4
Supports ATA Host Bridge
Supports 3.5" SATA-I & SATA-II hard drives and 5.25" optical drives; such as, CD-Rom, CD-R/RW, DVD-Rom, DVD-R/RW, Blu-ray drive, etc.
With easy Master/Slave jumper selection
Supports Serial ATA Power Save mode
Plug-N-Play and Hot-swapping capability
Features: Operating System Requirements:
Windows 98SE/ME/2000/Server 2003/XP/Server 2003/Vista/Server 2008/Windows 7
Linux
Mac OS X 10.2.x or above
Specifications: Suitability: All SATA devices
Interface: 7 + 15 pin SATA
OS Compatibility: Windows 98SE/ME/2000/XP/Vista
Features: SATA to IDE Bridge Board
Convert all SATA devices to IDE
Support all SATA devices (H.D.D./DVD/CD-ROM, etc.)
Data transfer rate up to 3.0 Gbps
Two LED indicators for "power on" (green) and "HDD" (Red)
Specifications: Specification:
Board size: 2.40" x 2.05" x 0.03" (W, L, T)
On-board LED indicators for power-on and compact flash access
Voltage selection for +3.3V or +5V compact flash
Master or slave mode selection
Power input: +5V, floppy disk drive power connector
Fully compatible with Compact Flash Type I, Type II, and Micro-drive
40-way (2.54mm) standard IDE connector
This adapter does NOT support hot insertion of CF cards
System Requirement:
PC or Mac with one IDE connector
MS Windows, Mac OS, Linux operating system
Features: Directly plugged into IDE connector on the motherboard without an IDE cable
No external power needed when used on VIA’s EPIA series motherboard
Specifications: PCB enclosed in solid plastic molding.
Quality designed molding ensures PCB can't short-out.
Gold tipped adapter pins for excellent electrical conductivity.
All pins included for all 2.5" and 3.5" IDE Hard Drive applications.
Convert a notebook hard drive to fit 3.5-inch drive bay
Perfect for extra storage
Easy assembly
Connectors: 44-pin Female to 40-pin IDC Male
Use: Connects your 2.5in notebook IDE hard drive to a 40-pin IDE cable
Features: Works for ALL LAPTOPS HARD DRIVE including DELL, SONY, IBM, Toshiba, HP, COMPAQ, Fujitsu and much more
Easily create Ghost images of your laptop (keep in mind that it is much harder to create Ghost Images from laptop itself)
Transfer data from laptop drive to a desktop drive the quickest way
The best accessory for laptop data backup and recovery
Th...
Specifications: Connectors:
1 x 40 pin IDE connector for host connection
1 x 7+15pins Serial ATA port for SATA hard drive
1 x 4-pin power connector
Features: Converts IDE connector for Serial ATA Drive
Compatible with Ultra ATA 100/133 with Data transfer rate up to 1.5 Gbps (150 MB/s)
No Driver required
Supports SATA devices such as CD/DVD Drives, CD/DVD Burners....)
Supports up to 2 channels & 2 devices
With no Jumpers, makes it easy for configuration
Specifications: Media Slots: 1
Media Support: Microdrive / CompactFlash Type I / CompactFlash Type II
Host Interface: IDE/EIDE
Interfaces: 1 x 40-pin IDE/EIDE
Form Factor: 3.50" Internal Hot-swappable
LOADING...
