Your Browsing History
Make informed decisions with expert advice. Learn More
Brand | FSP Group |
---|---|
Model | FSP530-60GNA |
Type | ATX |
---|---|
Maximum Power | 530 W |
Fans | 2 |
PFC | No |
Main Connector | 20Pin |
+12V Rails | Single |
SLI | No |
Modular | No |
Power Good Signal | 100-500ms |
Hold-up Time | 16.6ms min.@115V/60Hz; 20ms min.@230V/50Hz |
Efficiency | 65% min. 70% typical, at full load |
Over Voltage Protection | +5V : 6.5V(maximum) +3.3V : 4.6V(maximum) +12V : 15.5V(maximum) |
Overload Protection | 150%max |
Input Voltage | 115 / 230 V |
Input Frequency Range | 50/60 Hz |
Input Current | 12A @ 115V, 7A @ 230V |
Output | +3.3V@28A,+5V@40A,-5V@0.3A,+12V@18A,-12@0.8A,+5VSB@2A |
MTBF | 100K hrs minimum, 25 °C ambient |
Approvals | UL, CSA level 6, TUV, NEMKO, FCC, C-TICK, CB, CE |
Connectors | 1 x Main connector (20 pin) 1 x 12V (P4) 6 x peripheral 1 x SATA 2 x Floppy |
Features | High efficiency Low Ripple & Noise Reset table power shut down 100% burn-in under high ambient temperature (50°C) vacuum-impregnated transformer Line input fuse protection Temperature range: operating 0°C ~ 50°C storage-20°C ~ +65°C Temperature coefficient: 0.01%/ 0°C Transient response: output voltage recovers in less than 1ms max. following a 25% load change Dielectric withstand: input / output 1800VAC for1 second, input to frame ground 1800VAC for 1 second |
---|
Date First Available | July 18, 2003 |
---|