AmpliVox S1600 Wireless Leapel Microphone System Kit

Sold and Shipped by Newegg

Overview
Specifications
Warranty & Returns
Reviews
Q&A

AmpliVox S1600 Wireless Lapel Microphone System Kit

The S1600 Wireless Lapel Microphone System Kit gives you everything you need to expand your speaking platform. State-of-the-art wireless electronics help ensure a consistent signal and dependable performance.

Features

AmpliVox S1600 Wireless Lapel Microphone System Kit

POWER SOURCE
The transmitter and receiver are each operated by a 9V alkaline battery. Before use, install a battery as shown. Make certain the battery is fully seated in its compartment so the cover slides in place easily. Battery life with alkaline batteries is approximately 8 hours of operating time. The receiver also features an external jack for connecting a 9V DC power supply (not included).
TRANSMITTER OPERATION
If there is a "dead spot" in a room, try a slight change of position or try changing frequencies.
- Each unit provides two selectable transmitting frequencies.
- Switch the Frequency Selector Switch to the desired channel (A or B).
- Belt clip on the back of the unit clips the transmitter onto a belt or the transmitter simply can be put into a pocket.
- Plug the microphone into the Mike Input Jack.
- The microphone can be clipped to a necktie or other clothing, using the supplied clip.
- Slide the power ON/OFF switch to the ON position (the LED indicator light will light).
RECEIVER OPERATION
- Each unit provides two selectable receiving frequencies.
- Switch the Frequency Selector Switch to the same channel as the one selected on the transmitter (A or B)
- Attach the receiver to the amplifier by inserting the mounting bracket foot into the amplifiers accessory shoe (if available) or with the supplied Velcro.
- Connect the mini-plug audio signal cable from the phone out jack on the receiver to the wireless mic jack on amplifier
- Attach Antenna by screwing it into socket on top of receiver.
- Turn the Power ON/OFF switch to the ON position (The LED indicator will light)
BELT CLIP
A detachable belt clip is included for convenience. Slide the tapered end of the belt clip into the grooved area located on the back of the unit until it clicks into place.
MOUNTING
The receiver can be mounted to some AmpliVox units by means of the supplied mounting bracket or velcro self-adhesive patch.

Learn more about the AmpliVox Sound Systems S1600-S1601

Model

Brand: AmpliVox

Model: S1600-S1601

Details

Type: Wireless Microphone Systems

Power

Power Supply: 9V

Battery Time: Battery life with alkaline batteries is approximately 8 hours of operating time.

Features

Feature: POWER SOURCE
The transmitter and receiver are each operated by a 9V alkaline
battery. Before use, install a battery as shown. Make certain the
battery is fully seated in its compartment so the cover slides in place
easily. Battery life with alkaline batteries is approximately 8 hours of
operating time. The receiver also features an external jack for
connecting a 9V DC power supply (not included).

TRANSMITTER OPERATION
If there is a "dead spot" in a room, try a slight change of position or
try changing frequencies.
Each unit provides two selectable transmitting frequencies.
Switch the Frequency Selector Switch to the desired channel (A or
B).
Belt clip on the back of the unit clips the transmitter onto a belt or
the transmitter simply can be put into a pocket.
Plug the microphone into the Mike Input Jack.
The microphone can be clipped to a necktie or other clothing,
using the supplied clip.
Slide the power ON/OFF switch to the ON position (the LED
indicator light will light).

RECEIVER OPERATION
Each unit provides two selectable receiving frequencies.
Switch the Frequency Selector Switch to the same channel as the
one selected on the transmitter (A or B)
Attach the receiver to the amplifier by inserting the mounting
bracket foot into the amplifiers accessory shoe (if available) or with
the supplied Velcro.
Connect the mini-plug audio signal cable from the phone out jack
on the receiver to the wireless mic jack on amplifier
Attach Antenna by screwing it into socket on top of receiver.
Turn the Power ON/OFF switch to the ON position (The LED
indicator will light)

BELT CLIP
A detachable belt clip is included for convenience. Slide the tapered
end of the belt clip into the grooved area located on the back of the unit
until it clicks into place.

MOUNTING
The receiver can be mounted to some AmpliVox units by means of the
supplied mounting bracket or velcro self-adhesive patch.