Tripp Lite PDUMH20HVATNET Switched 1U Power Distribution Unit

Tripp Lite PDUMH20HVATNET Switched 1U 200V, 208V, 220V, 230V, 240V 20A 12 ft Power Distribution Unit

The Tripp Lite PDUMH20HVATNET 200-240V 16A Switched, Metered PDU system with Automatic Transfer Switching (ATS) offers 8 switched C13 outlets and 2 unswitched C19 outlets, plus a digital display to indicate total connected equipment power consumption level in amps. Switched outlets are factory programmed for sequential turn-on at 250 millisecond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup. Offers individual outlet control to power on, off, or cycle AC output to regain control of locked-up servers and other network devices. Programmable load ramping and shedding enables user-configurable startup and shutdown sequences, including UPS load management to automatically increase runtime for the most critical connected items by shutting down less critical items at user-determined intervals.

Integrated ATS provides a redundant power option for networking and server applications with non-redundant internal power supplies. When both the PRIMARY and SECONDARY C20 inlets are connected to two separate building circuits, UPS systems or other power sources, the PDU automatically will provide ATS protection to connected loads. In ATS mode, the PDU will normally maintain continuous output to all outlets as derived from the primary C20 input cable. If the primary power source becomes unstable or fails altogether in relation to the secondary, the ATS will switch over to the secondary power source until the primary input is restored and stable. ATS functionality with 2-5 millisecond transfer time is supported by any two compatible 200-240V AC power sources, regardless of phase angle, to offer support for a variety of unique redundant power applications.

Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave online UPS. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED display primary and secondary power availability.

High Performance Featuring 8 C13 switched outlets, 2 unswitched C19 outlets and the advanced Automatic Transfer Switch (ATS) technology, the Tripp Lite PDUMH20HVATNET provides superior power distribution performance.
Flexible Inlets The 2 built-in C20 inlets supports a variety of user-supplied cordset and the connection to Primary and optional Secondary power sources.
Remote Interface Built-in web/network monitoring card enables remote power monitoring and programmable or real-time outlet control. Remote interface displays status of input power, load capacity and outlet power status via secure network or web browser interface.
Network Hardware Protection The ATS function enables setup for hot-swappable UPS maintenance bypass, dual UPS protection or dual AC input redundancy for critical single-corded network hardware, and the individually controlled outlets provide load management power control to networked equipment, delivering maximum protection for the network devices.
Inrush Prevention The Tripp Lite PDUMH20HVATNET features sequential outlet turn on to eliminate power up in-rush of connected devices on initial start-up.

Learn more about the Tripp Lite PDUMH20HVATNET

General

Brand: Tripp Lite

Model: PDUMH20HVATNET

Type: Switched

Rack Size: 1U

Style: Rackmount

Dimensions: 1.72" x 17.3" x 14.8"

Weight: 10.3 lbs.

Output

Output Voltage: 200V, 208V, 220V, 230V, 240V

Output Frequency: 50/60Hz

Input

Input Voltage: 200; 208; 230; 240

Maximum Input Current: 20A

Cord Length: 12 ft

Miscellaneous

Front Panel LEDs: 8 front panel LEDs display power on - off status for each C13 outlet, plus 2 LEDs for power status on Primary and Secondary input connection. Digital current meter display shows the amount of power consumption in amps for entire PDU output.

Certifications: Tested to UL 60950 (USA, Canada), CE (Europe), Class A (Emissions), NOM (Mexico)

ROHS: Yes

Feature

Features: 200-240V 16A Automatic Transfer Switch (ATS) / Switched PDU (Power Distribution Unit)

Provides a redundant power option for critical networking equipment with a single input power cord

2 digit display reports power consumption in amps

1U horizontal rackmount form factor

10 outlets (8 C13 switched / 2 C19 unswitched)

Two C20 inlets for separate Primary and Secondary inputs; two 12 ft / 3.7m C20 input cables included

ATS circuits normally maintain output sourced from the primary input cable; As primary input power fails, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable

ATS configurations enable hot-swappable UPS protection when used with a single UPS and redundant UPS protection when each cord is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported by an online UPS with zero transfer time)

Advanced ATS configurations utilizing separate mains circuits, backup generators and separate out of phase utility power grid feeds are supported

On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source

2-7 millisecond transfer time

Switched outlets and ethernet interface supports individual outlet control on a real-time or programmable basis and user-specified alarm notification thresholds for all reported site power conditions

DHCP/Manual configuration support

Supports HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols

Outlets are factory programmed for sequential turn-on at 250 millisecond intervals when the PDU is first energized

LEDs confirm power availability on both input lines and for each output receptacle