Tripp Lite PDUMH30ATNET Switched 2U Power Distribution Unit

Tripp Lite PDUMH30ATNET Switched 2U 120V 30A 10 ft. Power Distribution Unit

120V
30A
10 ft.

PDUMH30ATNET 2U horizontal rackmount Auto Transfer Switch / ATS offers 30A 120V multi-outlet power distribution with dual input connections, individually switched outlets, built-in network interface and digital current metering. Includes separate L5-30P primary and secondary input cords and 25 switched output receptacles. Built-in network interface enables remote SNMP/Web monitoring and control. Remotely displays status of input power, load level and outlet power status via secure network or web browser interface. Supports optional environmental and contact-closure sensor options. Offers programmable or real-time individual outlet control to power on, off, or cycle AC output to regain control of locked-up servers and other network devices.

Learn more about the Tripp Lite PDUMH30ATNET

General

Brand: Tripp Lite

Model: PDUMH30ATNET

Type: Switched

Rack Size: 2U

Style: Rackmount

Dimensions: 3.5" (2U) x 17.5" x 12.5"

Weight: 13.8 lbs.

Output

Output Voltage: 120V

Output Frequency: 60 Hz

Output Connector(s): 24 5-15/20R (switched), 1 L5-30R (switched)

Input

Input Voltage: 100V, 120V, 127V

Maximum Input Current: 30A

Input Connector(s): Two labelled L5-30P inputs support Primary and Secondary input connections

Cord Length: 10 ft.

Networking

Remote Management Protocol: SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols

Miscellaneous

Front Panel LEDs: 25 LEDs display power on - off status for each outlet, plus 2 LEDs for power status on Primary and Secondary input connection.

Certifications: Tested to UL 60950-1 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS Complaint

ROHS: Yes

Feature

Features: 120V 30A Power Distribution Unit (PDU) with Auto-Transfer Switch (ATS) and Switched output receptacles (agency derated to 24A continuous)

ATS features provide redundant power for critical network equipment with a single input power cord

Switched PDU features enable programmable or real-time power control of individual outlets via built-in network interface

Visual meter reports output power consumption in amps

25 switched outlets (24 5-15/20R & 1 L5-30R); 2U horizontal rackmount form factor; 12.5 in. / 31.8cm depth

Two NEMA L5-30P 10 ft. / 3m inputs connect to separate PRIMARY and SECONDARY power sources

ATS normally maintains output sourced from the primary input; As primary input power fails or becomes unstable, the ATS switches to power equipment from the secondary input until power on the primary input is restored

ATS configurations enable hot-swap UPS protection when used with a single UPS and redundant UPS protection when each input is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported by an online UPS similar to Tripp Lite SmartOnline)

Advanced ATS configurations using separate mains circuits, backup generators and out of phase utility feeds are fully supported

On-board processor evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source

3-6 millisecond transfer time between primary and secondary inputs

DHCP/Manual configuration support; Supports HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols

Compatible with optional ENVIROSENSE temperature monitor

Front panel LEDs confirm power availability on primary / secondary inputs and each output receptacle