C.A.P. TMP-1 Cooling Heating Hydroponic Thermostat Temperature Controller C.A.P. TMP-1 Cooling Heating Hydroponic Thermostat Temperature Controller

The TMP-1 allows you to control the temperature within your growing environment. Just connect your air conditioner or fan, then set the temperature that you wish to maintain. If that temperature is exceeded, the outlet turns on your equipment until the temperature decreases below the set temperature by 5 degrees. Comes with a 3' remote sensor. The TMP-1 is rated for 15 amps @ 120 volts.

The TMP-1 is extremely easy to use. Once connected, the temperature will be maintaine at the level you set. Plug your exhaust fan or A/C into the outlet on the front face. Plug the TMP-1 into a standard 15 amp, 120 volt outlet. The TMP-1 can be secured to the receptacle it is plugged into by using the supplied screw in place of the standard
receptacle cover-plate screw.

Adjust the TMP-1 by using the large knob on the front of the unit. When the temperature rises to the preset level, the cooling device plugged into the TMP-1 will be energized. The TMP-1 will turn OFF the cooling device after the temperature has been reduced by approximately 5° F.