Adjustable Tilt Stainless Steel Monument Adapter 2072-33 - OEM Adjustable Tilt Stainless Steel Monument Adapter 2072-33 - OEM

SECO’s new #2072-Series 303 stainless steel adapters are the perfect link between your GPS antenna and mast for your network antenna solution. The brass 5/8 x 11 male stud is removable and adjustable in azimuth. It is held in location by two set screws. The adapters are leveled by three adjusting screws with a tilt range of +/- 7 degrees. The height above the pivot point to the stud shoulder is 1.37 inches (3.50 cm). The height below the brass 5/8 x 11 stud to the shoulder is 0.463 inches (1.18 cm). The #2072-Series’ female base is threaded to match the male pipe used. The axis height is engraved on the outside of the monument. Topcon Antenna GR3-1A users, be sure to order any of these monument adapters and extension #2072-001. The extension adds 1.00-in (2.54-cm) to the height, which enables easy access to cabling. Number: For Use With: Special Adapter: 2072-001 Use with Topcon GR3-1A Antenna 2072-30 MPT 1.5 x 11.5-inch pipe TPI 2072-31 MPT 2 x 11.5-inch pipe TPI 2072-32 MPT 3.5 x 8-inch pipe TPI 2072-33 Male 5/8 x 11 threads