The P3D2-10 Punch Series 10" Subwoofer has a peak power rating of 1000 watts and a RMS rating of 500 watts. This sub will produce some earth shaking bass and is constructed with an anodized aluminum cone and a vertical attach surround technique. This woofer is also equipped with a 2-1/2" Voice coil and a protective PVC textured magnet cover. Add some bumps in your trunk and enhance your cars stereo system with this Rockford Fosgate Punch Series Subwoofer.
By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.
Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.
To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.
In order to increase the surface area of the cone without causing any installation issues, Rockford Fosgate designed the Vertical Attach Surround Technique (VAST). By redesigning the manner in which the surround adheres to the basket, these speakers gain up to 25% more effective radiating cone area. This improves the nominal efficiency and maximum output.
10" Punch P3 Series Dual 2 Ohm Subwoofer
Peak: 1000 watts
RMS: 500 watts
Impedance: 2 ohm
Dual tear & fatigue resistant linear poly cotton spiders
Optimized motor magnetics with extended pole and bumped backplate
Fatigue resistant and reduced strain stitched tinsel leads
Multi point high temp/strength neck joint bonding technique
Sturdy 16 gauge compound bend frame geometry
Semi-Flexible PVC removable protective motor cover
Custom insulated compression input terminal assembly
Proprietary spider venting/cooling technique
Decorative die cast trim ring
Custom 10-AWG nickel plated push terminals
Double stacked ferrite magnet structure
Frequency response: 28-250 Hz
Sensitivity: 82 dB
Xmax: 13.9 mm
Mounting Depth: 6-3/16"
Cutout Diameter: 9-1/8"
Anodized aluminum heat sinking cone & dustcap for strength and durability
High temperature 4-layer 2-1/2" voice coil with spun laced nomex insulating reinforcement collar
Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area
Subwoofer Series Punch P3
Subwoofer Size 10"
Peak Power Handling 1000 watts
RMS Power Handling 500 watts
Voice Coil(s) Dual
Impedance (Per Voice Coil) 2 ohms
Voice Coil Diameter 2.5"
Frequency Response 28 - 250 Hz
Sensitivity 82 dB
Xmax (millimeters) 13.9 mm
Subwoofer Design Round / Circle
Main Cone Color Black
Woofer Composition Aluminum
Woofer Surround Santoprene Rubber
Magnet Structure Double Stacked
Subwoofer Grille Optional
Re-Cone Kit Available No
Manufacturer: Rockford Fosgate
Model number: P3D210
Weight: 17.00 lbs
Warranty Provider: 1 Year Manufacturer Warranty
Your request will be processed within the next 24 hours.
Please add "email@example.com" to your address book to ensure delivery.See Today's E-Blast Promo