Alpine PDXM6 600W RMS,PDX Monoblock Power Amplifier Alpine PDXM6 600W RMS,PDX Monoblock Power Amplifier

Alpine PDX-M6
My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

Alpine packs Class-D amplifier technology into their PDX amplifiers for awesome power from a 2" tall frame. These small-but-mighty amps run so cool they can be stacked together into a single unit — their heatsinks couple together to cool the entire stack. Each amp offers an 8" by 10" footprint, so they'll fit in hatchbacks, trunks, truck cabs, and any vehicles with limited space.

Mono powerhouse
The PDX-M6 mono amplifier supplies 600 watts of sub-cranking power from its amazingly compact body. Beefy internal components and clever engineering keep the power output strong and the noise low for superb fidelity and control. The adjustable low-pass filter tailors the amp's output to your specific system.

Front-mounted controls and pop-out connectors
Front-mounted controls make post-installation adjustments a snap, even when multiple amps are stacked together. Nifty removable speaker and power wire plugs make it easy to install or remove an amp, while ensuring a tight connection and guaranteeing that your speakers work in unison. Gold-plated RCA inputs, outputs, and power connections resist corrosion and signal degradation.


Highlights:

mono subwoofer amplifier
600 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms)
CEA-2006 compliant
stackable installation design with front-panel controls
variable low-pass filter (50-400 Hz, 24 dB/octave)
switchable subsonic filter (off, 15 Hz, 30 HZ)
quick-connect speaker and power connectors
preamp-level inputs and outputs
Class-D amplifier design
MOSFET power and output stages
fuse rating: 20A x 4
4-gauge amp wiring kit with 80-amp fuse recommended — wiring and hardware not included with amplifier
10-1/8"W x 2-1/16"H x 8-5/8"D
warranty: 1 year



Features and Specs:

Performance :


RMS Power Output (Watts x Channels) 600 x 1
Peak Power Output (Watts x Channels) N/A
Power at 2 Ohms (Watts x Channels) 600 x 1
Bridged Power (Watts x Channels) N/A
Minimum Impedance Bridged N/A
Minimum Impedance Unbridged 2
Best Frequency Response 5-400 Hz
THD at Rated RMS Power 1%
Signal to Noise Ratio 95 dB
Input Voltage 14.4v