Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
ORICO 6628SUSC-BK 2 Bays 2.5"/3.5" HDD Docking Station with Clone FunctionORICO 6628SUSC-BK 2 Bays 2.5"/3.5" HDD Docking Station with Clone FunctionORICO 6628SUSC-WH 2 Bays 2.5"/3.5" HDD Docking Station with Clone Function
First From ASIA brings the most desired and unique products from Asia to our American customers. All First from ASIA products meet US product regulations. You can expect the same Newegg service but differences in shipping and refunds apply.
2.5" & 3.5"
USB 2.0 & eSATA dual super speed connectivity, support up to 4TB
Stand alone clone ready
Tool Free Design, allowing installation in seconds
The ORICO 6628SUSC-BK supports two 2.5-inch or 3.5-inch SATA I, SATA II, or SATA III hard disk drives or solid state disks, each with a maximum capacity up to 4TB; the total capacity can be expanded to 8TB. Its tool-free design allows you to mount or unmount the drive, without tools or screws, in just three seconds. The USB 2.0 and eSATA dual high speed port offers fast, reliable, and easy connectivity. It is ready for a hard drive stand-alone clone, which allows you to duplicate the source hard drive in the HDD1 slot to target the hard drive in the HDD2 slot without connecting the dock to the computer. It also supports intelligent sleep mode. If no data R/W more than 5-min/pull out data cable/clone without computer/clone finished etc, it enters into sleep mode to reduce HDD damage and power consumption.
Clone Function The 6628SUSC-BK supports a hard drive stand-alone clone function without connecting to a computer. You are free to enjoy your time, and leave it alone to duplicate.
BOTH USB 2.0 AND E-SATA ENABLED The 6628SUSC-BK achieved with USB 2.0 and e-SATA controller with both USB 2.0 and e-SATA cable included. You can connect the device and the HDD to the computer more flexibly.
PLUG AND PLAY Just put your drive in and plug it in to your computer – no reboot or additional driver is needed.
UNIQUE DESIGN The unique inclined-slot design provides you with a convenient and exquisite usage experience, and saves desk space efficiently.
ORICO 6628SUSC 2 Bay SATA Hard Drive Dock is ready for Two 2.5 or 3.5 SATA Hard Drive or SSD, Ready for SATAI/II/III Drive, Ready for Hot Swap/Plug & Play, Access two SATA Hard Drives simultaneously. High Power AC Adapter included, Ready for two 3TB Hard Drives.
It is an ideal solution for you to access File,Video,Music and photo in Hard Drive easy and quicly. USB2.0 & eSATA Dual Super Speed Port offer a Fast, Reliable & Easy Connectivity (USB2.0 & e-SATA Cable included). ORICO 6628SUSC is ready for Hard Drive Stand Alone Clone allow to duplicate Source Hard Drive in Slot HDD1 to Target Hard Drive in Slot HDD2 without connect the Dock to Computer. Duplicate speed up to 60-80MB per second. You don't have to spend your time with Computer to duplicate your Hard Drive and the Process won’t drawing the CPU & Memory Usage since the Dock don’t need to connected to Computer at all. You are free to enjoy your time by just leave it alone for the duplicate. Tool Free design allow to install Hard Drive without screws & tools in three second by just plug in Hard Drive.
1.AHCI(Serial ATA Advanced Host Controller Interface) is required to be enabled by config the BIOS if connect ORICO 6628SUSC to computer with eSATA Port.Otherwise the HDD/SSD won’t be recognized in computer.Or You have to “Scan for hardware changes”in “Device Manager” or restart your computer.
2. General eSATA Port from Computer is not ready Port Multiplier(PM).Which means those eSATA Port can work with 1 Bay Hard Drive Enclosure or Dock ONLY and can’t work with Dual Bay Devices such as ORICO 6628SUSC.Please ensure the eSATA Port of your computer is ready for Port Multiplier.Or ORICO 6628SUSC may can’t work with the computer via eSATA.
3.Please ensure the Volume of Target Hard Drive in Slot HDD2 is larger than Source Hard Drive in Slot HDD1 when duplicate Hard Drive.Hard Drives from same Manufacturer with same Brand,Model & Volume may have tiny Difference in Volume and that may cause the duplicate Failed.
4.Turn off ORICO 6628SUSC,Disconnect USB or eSATA Cable,Pulg in Source Hard Drive to Slot HDD1 and Target Hard Drive to Slot HDD2,Turn the Control Switch on Back Panel to “Clone”,Turn on ORICO 6628SUSC and Press the “Start” Button on Back Panel when duplicate Hard Drives.
5.Please backup Files in Target Hard Drive before duplicate.All files in Target Hard Drive will been overwrote when duplicating.
6.The Duplicate is “Sector to Sector” Copy but not “File to File” Copy.Duplicate a empty 1TB Hard Drive will take the same time of duplicate a full filled 1TB Hard Drive.
This review is from: ORICO 6628SUSC-BK 2 Bays 2.5"/3.5" HDD Docking Station with Clone Function
Pros: *****Stand alone clone ready***** I just pulled my hard drive out of my PC, inserted it and the VelociRaptor WD1000DHTZ, pressed clone, watched a movie on TV, installed the VelociRaptor WD1000DHTZ in my PC and SUCCESS.
Other Thoughts: I should have bought this years ago.
1 out of 1 people found this review helpful.
Thanks for the valuable feedback you provided!
Through the Newegg EggXpert Review Program, Newegg invites its best reviewers, known as EggXperts, to post opinions about new and pre-release products to help their fellow customers make informed buying decisions.Click here for more details.
Newegg’s gift-wrap service is the ideal solution for making your gift special!
Select your item as a gift, then add your message. Your gift will also be discreet with no prices being included on the packing slip.
Work with All Mac Osx systems Work with
All Windows OS systems (windows 98/me/2000/XP/vista/7/8) Come With Clone CD Software ( No downloadable link ) (Full Version Software With Unlimited of Use No Time Limit!!! ) This is the EASIEST and ...
Feature Supports three 2.5 inch & 3.5 inch
SATA hard drives, Maximum capacity up to 3 x 4=12TB Tool free design, Easy to use and operate, No additional drive is needed, Plug and Play 12V Power Adapter provides Adequate Power ...
ORICO 3519SUS3 Full Aluminum Tool Free 3.5-inch SATA
Product Features: Tool Free Design allow to install
or uninstall Drive without tools and screws in 3 second USB3.0 & eSATA Dual Port offer a Easy , Reliable and Super Speed 5Gbps Connection Aluminum Case offer excellent heat dissipitation and ...
Descriptions: This product can be more efficiently and
conveniently save your hard disk data, and timely backup important information that you need. At the same time, hot swappable technology allows frequent data transmission more convenient, coupled with a high quality ...