ORICO 6628SUSC 2 Bay SATA Hard Drive Dock is ready for
Two 2.5 or 3.5 SATA Hard Drive or SSD,
Ready for SATAI/II/III Drive,
Ready for Hot Swap/Plug & Play,
Access two SATA Hard Drives simultaneously.
High Power AC Adapter included,
Ready for two 3TB Hard Drives.
It is an ideal solution for you to access File,Video,Music and photo in Hard Drive easy and quicly. USB2.0 & eSATA Dual Super Speed Port offer a Fast, Reliable & Easy Connectivity (USB2.0 & e-SATA Cable included). ORICO 6628SUSC is ready for Hard Drive Stand Alone Clone allow to duplicate Source Hard Drive in Slot HDD1 to Target Hard Drive in Slot HDD2 without connect the Dock to Computer. Duplicate speed up to 60-80MB per second. You don't have to spend your time with Computer to duplicate your Hard Drive and the Process won’t drawing the CPU & Memory Usage since the Dock don’t need to connected to Computer at all. You are free to enjoy your time by just leave it alone for the duplicate. Tool Free design allow to install Hard Drive without screws & tools in three second by just plug in Hard Drive.
1.AHCI(Serial ATA Advanced Host Controller Interface) is required to be enabled by config the BIOS if connect ORICO 6628SUSC to computer with eSATA Port.Otherwise the HDD/SSD won’t be recognized in computer.Or You have to “Scan for hardware changes”in “Device Manager” or restart your computer.
2. General eSATA Port from Computer is not ready Port Multiplier(PM).Which means those eSATA Port can work with 1 Bay Hard Drive Enclosure or Dock ONLY and can’t work with Dual Bay Devices such as ORICO 6628SUSC.Please ensure the eSATA Port of your computer is ready for Port Multiplier.Or ORICO 6628SUSC may can’t work with the computer via eSATA.
3.Please ensure the Volume of Target Hard Drive in Slot HDD2 is larger than Source Hard Drive in Slot HDD1 when duplicate Hard Drive.Hard Drives from same Manufacturer with same Brand,Model & Volume may have tiny Difference in Volume and that may cause the duplicate Failed.
4.Turn off ORICO 6628SUSC,Disconnect USB or eSATA Cable,Pulg in Source Hard Drive to Slot HDD1 and Target Hard Drive to Slot HDD2,Turn the Control Switch on Back Panel to “Clone”,Turn on ORICO 6628SUSC and Press the “Start” Button on Back Panel when duplicate Hard Drives.
5.Please backup Files in Target Hard Drive before duplicate.All files in Target Hard Drive will been overwrote when duplicating.
6.The Duplicate is “Sector to Sector” Copy but not “File to File” Copy.Duplicate a empty 1TB Hard Drive will take the same time of duplicate a full filled 1TB Hard Drive.
Showing 0 of 0 reviews - Clear Filters
Your request will be processed within the next 24 hours.
Please add "email@example.com" to your address book to ensure delivery.See Today's E-Blast Promo