Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
1.Antenna: transmit the signal to Receiver Collar
2.Led light: this light will be on when pressing LED light button
3.LED Indicator: this light will flash when transmitter works, or when charging, this light will be on
4.LCD Screen:Static mode: under this mode, press Y button, Receiver will shock, press up/down button, can adjust Static level from 0 to 100.
Vibration mode: under this mode, press Y button, Receiver will vibrate, press up/down button, an adjust Vibration level from 0 to 100. Beep mode: under this mode, press Y button, Receiver collar can get beep sound. Light mode: under this mode, press Y button, the green LED light in the Receiver will flash every one second, it is convenient to let you know where your pet is.
Channel 1: select to encode between transmitter and one of receiver collar
Channel 2: select to encode between transmitter and 2nd of receiver collar
5.Up/down button: intensity level button for Vibration and Static Shock
6.Led light button: when pressing the LED light button, the led light in the Transmitter will be on
7.Channel button: press the button, can select to encode between transmitter and one of receiver collar, or between transmitter and 2nd of receiver collar
8.Launch button: after you finish mode selecting, press this button for confirmation.
9.Mode button: include 4 modes Static Mode, Vibration Mode, Beep Mode and Led light mode
10.charging hole: charge for Remote Collar
11.Contact points: deliver the safe static correction
12.Rest hole; turn on/off the receiver
13.DV-5V hole: charge for receiver
1.Easy-to-use, ergonomic transmitter.
2.Waterproof for bad weather training and keep the collar against wet inside.
3.rechargeable collar with optional UK, US, AU, EU Charger
4.Rheostat dial that allows for gradual increase in stimulation intensity with n jumps between 0-100 levels.
5.4 training modes: static shock/vibration/beep/light
6.the Petrainer element 998DRA has a 300 range
7.Two dog modes allow the trainer to control two different dogs from one transmitter.
8.featured power saving design with automatic standby and memory function
9.No external antenna on the collar receiver
10.Reduced receiver/collar/is ideal for small/medium size dogs
11.the liquid crystal digital display let the operation become simple
l2.the controller and the receiver has built-in lithium battery, and match the chargers for them
Transmitter: 3.7V 500ma Lip
Receiver: 3.7V 500ma Lip
Package weight: 10.0 oz
How to use:
1.Charge the remote transmitter/receiver:
1)Connect the charger connector to the charging jack/DC-5V hole
2)Plug the charger into a standard outlet
3)The red light on the transmitter will be lighted
4)Charge the transmitter/receiver at least 6 hours for the first charger b
5)After fully charged, the red led will be turned off automatically ( Important note: Low battery indicator: the symbol will show on the LCD screen)
2.Connect transmitter and receiver:
1)Turn on the transmitter by pressing any button on the transmitter
2)Press 1/2 button to choose channel for connection, choose channel 1 for the first receiver
3)Lift the rubber cover of the Reset part on the receiver. Press the Reset button in side of the receiver with a pen or paper clip, and the green LED light will turn on
4)After a Beep from the receiver, press the "Y" button on the transmitter within 10 seconds
5)The collar receiver will beep if connected successfully
6)Press "1/2"button to encode, choose to channel 2 for second collar by the same procedure
1.The transmitter will go into Standby Mode if there is no operation after 20 seconds and turn off after 20 minutes. The transmitter will go into Standby Mode if unused for 4 minutes. Any movement will activate the receiver.
2."1/2" button to choose channel for connection. In channel 1, can 1.only train the first receiver, in channel 2 train the second receiver, in channel 2 train the second receiver
3.In working mode, if you want to reconnect the receiver, simply with a pen or paper clip, press the reset button, there is a beep sound to indicate that
its ready to encode
4. The receiver is designed to be waterproof. The rubber cover has to put in the right position
1. The lifetime of the batteries vary according as how often you use the product. Therefore you should often check the batteries by hear the beep from the Collar 2. Receiver and watching the indicator sign on the LCD screen of the transmitter
2. The valid distance of remote control means the straight-line distance between the transmitter and the Collar Receiver without obstacle in between. If there are interference signal or signal screening around, the actual remote control distance may vary.
3. This product is for pet training. Only by training, the pet can understand the intention of it power. Good effect can only be achieved after a period of training
4. Training session should be kept positive and short, about 10-15minutes long each time.
5. Presently, this product is the most effective and safest tool for training pet. Following the correct operational instructions, you can effectively train the pet and bring it no harm.
What is included:
Collar Receiver x 1
Controller x 1
User manual x 1
This item is eligible for Newegg Premier benefits. Are you a Newegg Premier Member? If not, sign up today and get:
Your request will be processed within the next 24 hours.
Please add "firstname.lastname@example.org" to your address book to ensure delivery.See Today's E-Blast Promo