New Uncut Replacement Transponder Ignition Car Key for Select Chrysler Dodge Jeep w/ Free DIY Programming Instructions

This is a brand new uncut transponder key for select Chrysler Dodge Jeep vehicles. Please check product description for vehicle fit guide.

A website link to free DIY programming instructions will be provided with every order. 2 original keys required in order to do self-programming. If you only have 1 or no keys then you will need to get this key programmed by an automotive locksmith or dealership.

This product is fully tested to guarantee its functionality.

Replacement for part numbers: C21424, 692325, EZ Y160PT, OE 05010366AA OE 050188690AA, Y160-PT

Complete working key with chip included

This is a Brand New Uncut Key with new transponder 4D64 Chip. 100% new, never used key.
This is a Keyless2Go transponder key that will work and function just like the original one.
A website link to free DIY programming instructions will be provided with every order.
You must already have 2 working unique (not cloned) keys in order to perform DIY programming. If you only have 1 or no keys then you will need to get this key programmed by an automotive locksmith or dealership.

Compatibility:

Chrysler
1999 - 2004 300M
1999 - 2004 Cirrus
1998 - 2004 Concorde
1999 - 2001 LHS
2001 - 2005 PT Cruiser
2001 - 2006 Sebring Sedan
1998 - 2006 Sebring Convertible
2001 - 2003 Town & Country
2001 - 2003 Voyager

Dodge
2001 - 2003 Caravan
2001 - 2004 Dakota
2001 - 2003 Durango
2001 - 2003 Grand Caravan
1998 - 2004 Intrepid
2000 - 2005 Neon
2002 - 2005 Ram 1500/2500/3500
1999 - 2006 Stratus Sedan

Jeep
1998 - 2001 Cherokee
1998 - 2004 Grand Cherokee
2002 - 2004 Liberty
1998 - 2006 Wrangler

***We cannot guarantee vehicle compatibility outside of USA and Canada***

This key is NOT ABLE TO BE CLONED. If you have any questions about cloning please contact us before you purchase.

DISCLAIMER
All product names, brands, logos and or other trademarks within our sales information are the property of their respective owners. These are used to simplify the identification of the proper parts for a particular vehicle. None of the companies or trademarks affiliate with, endorse or sponsor us or our products.

General

Brand: Keyless2Go

Type

Type: Replacement Remotes / Key Fobs

Do you own this product? Write a Review

Loading...

Filter Results Last 2 Weeks (0) Last 6 Months (1) All Reviews (1) 0% (0) 0% (0) 0% (0) 0% (0) 100% (1) Verified Owners Video Reviews Mfr. Responses keyword Go
Jeffrey F. 1/2/2016 9:41:21 AM Ownership: 4/5 Verified Owner	Rating: 1/5Useless This review is from: New Uncut Replacement Transponder Ignition Car Key for Select Chrysler Dodge Jeep w/ Free DIY Programming Instructions Pros: Low price Cons: On Newegg page it states the following: A website link to free DIY programming instructions will be provided with every order. 2 original keys required in order to do self-programming. If you only have 1 or no keys then you will need to get this key programmed by an automotive locksmith or dealership. 1) As it states in said statement "DIY" which is supposed to be short for "Do it yourself" where is in the instructions I finally got after not only contacting Newegg but also seller it states the following: *** 2010+ VEHICLES MUST BE PROGRAMMED BY AN AUTOMOTIVE LOCKSMITH OR DEALER** * 2) As it also states in said statement "A website link" and what I got was an e-mail from Newegg with the following instructions: Here's the programming instructions: Have all keys for the Dodge/Chrysler/Jeep ready - You must have two working programmed keys to use this procedure *** 2010+ VEHICLES MUST BE PROGRAMMED BY AN AUTOMOTIVE LOCKSMITH OR DEALER ** * H 1. Insert first programmed key into the ignition and turn ignition switch to ON. Wait for approximately 3 seconds then turn ignition to OFF and remove key. 2. Within 15 seconds of removing first key insert second programmed key into ignition and turn ignition switch to ON. Wait approximately 10 seconds. You will see the immobilizer warning lamp illuminate on the dash and you will hear an audible tone. Turn ignition OFF and remove the key. 3. Within 50 seconds insert the new unprogrammed key into ignition. Turn ignition switch to ON. After approximately 10 seconds you should hear an audible tone and the immobilizer lamp will remain illuminated for 3 seconds. Once this occurs programming is completed. 4. For each additional key you must repeat these steps starting with step number 1. Other Thoughts: Since my car is a 2005 PT Cruiser I have to take it to a Automotive Locksmith or Dealer and still have to pay them to program it so in other words this is useless because I do already have two keys and all I needed this for is the chip for my remote start feature on my Viper alarm system. If the web page had shown this information I would have never made the purchase and have saved all the hassle of buying what now is just a useless piece of trash! Did you find this review helpful? Thanks for the valuable feedback you provided!

Filter Results

0% (0)
0% (0)
0% (0)
0% (0)
100% (1)

Verified Owners
Video Reviews
Mfr. Responses

Go

Jeffrey F.
1/2/2016 9:41:21 AM
Ownership: 4/5
Verified Owner

Rating: 1/5Useless

Pros: Low price

Cons: On Newegg page it states the following: A website link to free DIY programming instructions will be provided with every order. 2 original keys required in order to do self-programming. If you only have 1 or no keys then you will need to get this key programmed by an automotive locksmith or dealership.

1) As it states in said statement "DIY" which is supposed to be short for "Do it yourself" where is in the instructions I finally got after not only contacting Newegg but also seller it states the following:
*** *2010+ VEHICLES MUST BE PROGRAMMED BY AN AUTOMOTIVE LOCKSMITH OR DEALER*** *

2) As it also states in said statement "A website link" and what I got was an e-mail from Newegg with the following instructions:

Here's the programming instructions:
*Have all keys for the Dodge/Chrysler/Jeep ready - You must have two working programmed keys to use this procedure *
*** *2010+ VEHICLES MUST BE PROGRAMMED BY AN AUTOMOTIVE LOCKSMITH OR DEALER *** *
H
1. Insert first programmed key into the ignition and turn ignition switch to ON. Wait for approximately 3 seconds then turn ignition to OFF and remove key.

2. Within 15 seconds of removing first key insert second programmed key into ignition and turn ignition switch to ON. Wait approximately 10 seconds. You will see the immobilizer warning lamp illuminate on the dash and you will hear an audible tone. Turn ignition OFF and remove the key.

3. Within 50 seconds insert the new unprogrammed key into ignition. Turn ignition switch to ON. After approximately 10 seconds you should hear an audible tone and the immobilizer lamp will remain illuminated for 3 seconds. Once this occurs programming is completed.

4. For each additional key you must repeat these steps starting with step number 1.

Other Thoughts: Since my car is a 2005 PT Cruiser I have to take it to a Automotive Locksmith or Dealer and still have to pay them to program it so in other words this is useless because I do already have two keys and all I needed this for is the chip for my remote start feature on my Viper alarm system. If the web page had shown this information I would have never made the purchase and have saved all the hassle of buying what now is just a useless piece of trash!

Did you find this review helpful? Yes