Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
This is the latest v.5.5 KKmulticontroller that has been factory made and fully populated. It uses the Murata piezoelectric gyros which have been incorporated into the board design for robustness. The Yaw gyro assembly is also slot mounted for extra robustness. These gyros have proven to be the most vibration resistant of all the gyros we have tested so far.
The board comes in black with a blue LED and has an on board In System Programming (ISP) header to enable easy firmware updates with a site recommended programmer. The on board Atmega168 chip gives users the extra space to load expanded firmware with higher refresh rates to enhance stability.
The three adjustable potentiometers increase or decrease gyro gain for all three axis (Roll, Pitch and Yaw) and can be used to calibrate the ESCs and reverse the gyro directions if necessary during pre-flight setup.
The board also has six ESC/Servo headers which allow multicopter configurations from 2 to 6 rotors. There are also headers for thee aileron, elevator, throttle and rudder connections from your RC Receiver(RX). The board comes with a 4 x 3 pin jumper cables to connect your RX to the board quickly and easily.
There's variety of firmware available for this controller, you will have load them due to your needs, only test program is loaded by default.
100% brand new
Latest KKmulticopter controller V5.5 Board,V2.3 program
1. Simple structure, Easy to Maintain and Debug Control
2. Relying on potentiometer adjust gyro sensitivity.
3. Full servo signal output, support normal ESC / analog servo
4. Support for single-axis / UFO, Y3 3-axis, Y4-type 3-axis, 4 axis, 6 axis, V22 flight mode
5. Supports 4-axis "+" and "X" flight mode, support for six-axis "HEXA6" and "Y6" flight mode.
FlyCam MultiCopter Controller Blackboard(kkMultiCopter)
KK board AVR USBasp ISP + 6 pin adapter
The USB Firmware Loader / Programmer (USB ASPa) is the hardware utility which can change the flying mode of a KKmulticopter board by re-programming the internal flash of the board.
100% brand new
USB Firmware Loader USBasp Programmer for KKmulticopter Board, connect with the KK Flight control Circuit board directly, It's very convenient for DIY your aircraft.
that this is not used for parameter adjustment, it's only for flash different firmware of the KK Flight control Circuit board!
when you purchase this item, please contact me for getting driver, flashing tools and different flying firmware !also you can download from KKmulticopter website
1x KK Multicopter V5.5 Flight Control Board
1x USB Loader USBasp Programmer for KK Multicopter Board
1x kk multicopter ESC board
This item is eligible for Newegg Premier benefits. Are you a Newegg Premier Member? If not, sign up today and get:
Your request will be processed within the next 24 hours.
Please add "email@example.com" to your address book to ensure delivery.See Today's E-Blast Promo