Automotive brake fluid tester with self-setting ADD7704

Description:
1.It can test DOT3 DOT4 DOT5 depend on standard measuring mode
2.You can set test your own test data. depend on user measurement mode
3.The reading will show the water content of brake fluid in the tester
4.By adjusting the scale value, customize the standard and storage.
5.The probe has a waterproof design
6.Power supply: Two R03(size AAA) batteries
7.Operating current. 50mA,if the current is less than 60uA, the unit will power off
8.Low battery alarm and low battery power off automatically, this protects the rechargeable battery.
9.Digital clock, displays the date and time
10.Supports the storage of test data, delete data
11.The status screen shows the capacity of the internal battery.
12.Auto power off ,To save the power, it will turn off automatically if not operated after 1 minute.

Features:
1.Standard measuring mode : DOT3 DOT4 DOT5 parameters of the standard measurement

2.User measurement mode : Measurements carried out in accordance with the customer- defined parameters

3.Time set : Used to set the system date and time

4.Record: Used to view stored test results

5.Date and time : Displays the current date and time

6.Power display : Display real-time battery

7.Test status display : Display test results

8.Bar graph indicate : Cursor display test results and test standards

9.Digital indicate: Digital display test results and test standards

LCD display:
1.Standard measuring mode : DOT3 DOT4 DOT5 parameters of the standard measurement
2.User measurement mode : Measurements carried out in accordance with the customer- defined parameters
3.Time set : Used to set the system date and time
4.Record: Used to view stored test results
5.Date and time : Displays the current date and time
6.Power display : Display real-time battery
7.Test status display : Display test results
8.Bar graph indicate : Cursor display test results and test standards
9.Digital indicate: Digital display test results and test standards

Operation instruction
1.Screwing out screw on the shell and carry out rear cover, Load two battery R03(size AAA) into the magazine according to polarity markings.
2.After insert the batteries, the display will light up and show working screen, the product is working properly.
3.The top left of the screen displays the date, top right of the display time and real-time battery capability
4.Move the cursor to select mode, there are 16 options: dot3 , dot4 , dot5.1 , TIME ,RECORD, user1 — user10,power off
5. Press the Enter button to enter the current selection mode, the standard measuring mode and User measurement mode You can also modify date, check records etc
(1) The DOT3 mode:
the user can only be in accordance with the DOT3 default mode to test, press and hold the enter button for 2 seconds to record data
(2) The DOT4 mode:
User can only be in accordance with the DOT4 default mode to test, press and hold the enter button for 2 seconds to record data
(3) The DOT5 mode:
User can only be in accordance with the DOT5 default mode to test, press and hold the enter button for 2 seconds to record data
(4) USER mode:
User can test in accordance with the user measurement mode, press and hold the enter button for 2 seconds to record the data. If you want to change the testing standard, press the enter button briefly, the cursor will move down to the measuring scale position automatically. There are two measuring scales, the left is the scale between GOOD and OK, the right is between POOR and OK., The scales cannot overlap the user can adjust the mode according to their own needs
(5) TIME mode:
Press the enter button, the cursor will move down to the next one automatically, in order of year, month, day, minutes and seconds, the user can operate up and down to change the date and time
(6) RECORD mode:
Press the Enter button, move the cursor to the