Skip to: | |

Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.

If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.

Newegg.com - Computer Parts, Laptops, Electronics, HDTVs, Digital Cameras and More!

PremierTry Message.
Home
Home > 
Components > 
Fans & PC Cooling > 
CPU Fans & Heatsinks > 
Cooler Master > 
Item#: N82E16835103064

Cooler Master Hyper TX3 - CPU Cooler with 3 Direct Contact Heatpipes

  • 800 - 2800 RPM (PWM)
  • 15.7 - 54.8 CFM
  • Aluminum & Copper

ICON Loading...
  • Overview
  • Specifications
  • Warranty & Returns
  • Reviews

Learn more about the Cooler Master RR-910-HTX3-G1

Warranty, Returns, And Additional Information
  • Warranty
  • Limited Warranty period (parts): 2 years
  • Limited Warranty period (labor): 2 years
  • Read full details

Customer Reviews of the Cooler Master RR-910-HTX3-G1

Do you own this product? Write a Review

ICON Loading...

Filter Results

Go

Showing 972 of 972 reviews - Clear Filters

  • Ray P.
  • 5/17/2016 1:06:02 PM
  • Ownership: 1 day to 1 week
  • Verified Owner

4 out of 5 eggsKeeps things cool for cheap

This review is from: Cooler Master Hyper TX3 - CPU Cooler with 3 Direct Contact Heatpipes

Pros: Main pro: Much more stable temps than what the (admittedly not-so-great) stock AMD cooler could do on my FX-6300. This plus a dab of AS Ceramique knocked a couple degrees centigrade off my idle temps, but cut 15-20 degrees C off my load temps at stock clocks, without anywhere near the racket that the little AMD sink would toss out.

Uses the factory mounting for newer Intel LGA sockets or AM2/3 sockets. Nice that you don't have to yank the board (or get behind the motherboard tray if your case has a cutout), but this could also be seen as a con, since neither method really provides a good solid hold on the cooler like with a screw-on backplate system.

With that said, the cooler is lightweight enough that I'm not concerned about it sagging off the board even with the factory AMD mount.

Cons: Base of the fan is a tad low for mounting horizontally. Just barely clears my dimms (which are standard profile DDR3). If you have ram with big ol' heatspreaders, you may have to jiggle things around in the DIMM area, or just mount it so the fan blows up/down instead of fore/aft.

Other Thoughts: AMD mounting is a wee bit finicky. There's a set of guiderails that run between the heatpipes, and the box contains a thin two-pronged bar that slots into them, with the center heatpipe inside the prongs. The latching mechanism is a separate piece that slides onto the other end of said bar, and *will* fall off while you're getting it in place. Would recommend placing the latch end on whichever side of the socket as the most room to work so you can pop it back on without too much pain.

Not the worst I've endured getting a cooler in, but just wanted to toss it out there.

Did you find this review helpful? Yes No

  • Anonymous
  • 5/14/2016 9:09:17 PM
  • Ownership: 1 day to 1 week
  • Verified Owner

5 out of 5 eggsGreat cooler

This review is from: Cooler Master Hyper TX3 - CPU Cooler with 3 Direct Contact Heatpipes

Pros: Fit in a Thermaltake core v1 case. Max temp on an i3-6100 @4.0GHz went from 83°C to 66°C. Comes with paste. Fits 1151 socket.

Cons: The memory was too close and I had to remove the memory heat sink because it hit the fan.

Other Thoughts: The fan pulls air into the heat sink, hope that helps in planning orientation.

1 out of 1 people found this review helpful. Did you? Yes No

  • Michael B.
  • 5/9/2016 1:45:34 PM
  • Ownership: 1 month to 1 year
  • Verified Owner

4 out of 5 eggsNot Bad

This review is from: Cooler Master Hyper TX3 - CPU Cooler with 3 Direct Contact Heatpipes

Pros: Like many others have said the clips to secure the heatsink are a bit of a pain in a Mid or Mini tower because of the room issues, meaning that if you don't remove the fan in some cases you can't reach the pins.Not a problem for most.The cooler itself works well in my backup build(Q9650)and keeps the temp around 45 degrees.Really liking it so far especially with the price point.

Cons: Bulky in smaller cases......aforementioned clips......and mounting the adapters either AMD or Intel can be a pain if you have big hands. The instructions are useless

Other Thoughts: ALWAYS remove the clear plastic protector on the CPU side of the heatsink or you will have a really bad day

1 out of 1 people found this review helpful. Did you? Yes No

  • Anonymous
  • 5/5/2016 3:15:09 PM
  • Ownership: 1 day to 1 week
  • Verified Owner

5 out of 5 eggsThanks The product is awesome!

This review is from: Cooler Master Hyper TX3 - CPU Cooler with 3 Direct Contact Heatpipes

Pros: Its good

Cons: I don't know

Other Thoughts: I would get it if its recommended

Did you find this review helpful? Yes No

  • Anonymous
  • 4/19/2016 1:49:14 PM
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsGreat Price! Awesome Cooler

This review is from: Cooler Master Hyper TX3 - CPU Cooler with 3 Direct Contact Heatpipes

Pros: I got this cooler on sale with a rebate for a really good price. This cooler is on my server board with a Xeon X3450 2.66Ghz Quad Core CPU. I do not have any other fans in the ATX tower I am using and I did not attach the fan to the cooler for testing and I'm running at a cool 175 degrees with the CPU at full power. I put the fan on the cooler and have it set to 30% power and it keeps the cpu down to 120 degrees at full power. With the fan on 100% and the cpu at full power the temp sits around 99 degrees. This is pretty good performance for the price. I would definitely recommend this cpu cooler.

Cons: The fan that comes with it isn't crazy loud but a good Noctua fan or even an Arctic fan would make it a little more quiet. No other problems.

Did you find this review helpful? Yes No

  • Andrew M.
  • 4/11/2016 8:57:56 AM
  • Ownership: 1 week to 1 month
  • Verified Owner

4 out of 5 eggsWorks, but finicky

This review is from: Cooler Master Hyper TX3 - CPU Cooler with 3 Direct Contact Heatpipes

Pros: Keeps my CPU pretty cool. Fits inside my Thermaltake Core V1 ITX case (unlike the 212 Evo). Included fan is pretty quiet.

Cons: The pegs to attach the heatsink to the motherboard are very finicky, it took me 20 minutes just to get the thing mounted (all the while worrying about getting thermal paste on my motherboard). The fan clips on to the heatsink itself pretty loosely and doesn't instill a ton of confidence that it's going to stay put.

Other Thoughts: It works but it's tricky to install (at least for a beginner like me). I plan on upgrading to an H50 eventually for even better CPU cooling ability.

Did you find this review helpful? Yes No

  • jonathan f.
  • 4/9/2016 5:34:09 AM
  • Ownership: 1 week to 1 month
  • Verified Owner

5 out of 5 eggsCooler Master Hyper TX3 - CPU Cooler with 3 Direct Contact Heatpipes

This review is from: Cooler Master Hyper TX3 - CPU Cooler with 3 Direct Contact Heatpipes

Pros: very effective, broad support range, no additional mounting hardware needed for Intel. (It just mounts like the stock included intel Heatsink).I dropped 15+ C on my i3 4160 WCG crunching rig, which if You know crunching, runs @ 100% for extended periods (12hrs +or- 5Hrs). I used my own TIM Phobyia, since it has served me well.

Cons: the very nature of its mounting design, and how its manufactured to be easy to install means it has to use the intel mounting system, which I personally dont care for, but it functions well enough.

Other Thoughts: Science.

Did you find this review helpful? Yes No

  • Kelvin F.
  • 3/26/2016 4:14:04 PM
  • Ownership: 1 week to 1 month
  • Verified Owner

4 out of 5 eggsCooler Master Hyper TX3 - CPU Cooler with 3 Direct Contact Heatpipes

This review is from: Cooler Master Hyper TX3 - CPU Cooler with 3 Direct Contact Heatpipes

Pros: Great Cooler. the double fans expansion is great.

Cons: only one egg less because it almost don't fit on my Mid ATX desktop, rare but yes it a little bigger.

Other Thoughts: just centimeter less it would be no problem. is too big, but does it work perfectly.

0 out of 2 people found this review helpful. Did you? Yes No

  • Charles H.
  • 3/20/2016 6:24:10 PM
  • Ownership: 1 week to 1 month
  • Verified Owner

5 out of 5 eggsSo Great That It Killed My Motherboard

This review is from: Cooler Master Hyper TX3 - CPU Cooler with 3 Direct Contact Heatpipes

Pros: Funny story, this thing has such good cooling that I could keep my FX-6300 further, further, and further on my cheap, but well featured, motherboard that I bought in 2013. I just kept pushing the clock speed higher and higher. HWmonitor said that a part was reaching high temperatures when I hit the 4.6 GHz point on my CPU (with more voltage to go before hitting 1.41). HWmonitor did not know the name of the part so, as I found in my research, it provides it the name of TMPIN to such parts. I think it is safe to say that this part belonged to something on my Motherboard because my computer will not boot or anything the day after doing my crazy overclocking. I did not notice that this part reached such a high temperature (Because I was going "H$%y COW, look at these low temps" every time I looked at my CPU temps) until my computer underclocked itself while I was doing Prime95, so I looked at ALL my temperatures to find one part reaching 85C. A moment of silence to my cheap Biostar Motherboard. Haha, good job CoolerMaster.....I will see you in court. Just kidding CoolerMaster.

Cons: Deadly

Other Thoughts: Great cooler that is reasonable in size for those who don't have very deep cases. Now I am going to have to measure out new motherboards by using ratios to make sure this thing does not hit my RAM or anything.

1 out of 1 people found this review helpful. Did you? Yes No

  • Kevin m.
  • 3/17/2016 11:48:45 PM
  • Ownership: more than 1 year
  • Verified Owner

5 out of 5 eggsVery stable for an obsolete socket

This review is from: Cooler Master Hyper TX3 - CPU Cooler with 3 Direct Contact Heatpipes

Pros: Came with all the necessary equipment for most of the cpu sockets to date! Thermal paste in which i also used to repair an old GPU that needed new thermal pasting!
so far i have been amazed at how close this rivaled an older thermaltake cpu cooler of the same style, but had a 120mm fan, and was alot thicker! everything runs under 65c and sometimes can idle around 27c! I am running a 775socket Q8200 with light overclocking. I pushed it to the limit as far as my motherboard is capable of overclocking and maxed it out at 2.8 ghz and the heat never went past 68c, i was skeptic at first, now i am just impressed with it that i took the back case fan off of the machine, now its just one fan doing everything. Noise level is decent, can rev up high but is not annoying, it runs quieter then my PSU fan! i am very happy with it and is a great price to replace a stock cooler. was not sure about spacing between cpuc cooler and ram, it fit fine and made the motherboard look pretty cool. dual fan support for a push pull or just pull which is nice, make sure you have another fan connector.

Cons: the manual took 2 looks after getting the screws in the right place for the socket type, the manual could use a re edit. The locking pins are standard plastic and i cant stand those because they can break or strip easily, so i was very careful when clamping them to the motherboard, for something alittle more stable, i strongly recommend a cooler that has better material. did not come with a second fan for the setup, i hear there is one you can buy that has dual fan setup. you can order another one online for better cooling efficiency and can attach to the other side for a pull setup.

Other Thoughts: i was really not sure regarding how universal this thing can be, i tell you though if you plan on upgrading from an old socket to a new one, this cooler will be a breeze, has a futureproofing setup even if you swap intel or amd builds!
its been very stable, I have put it through overclocking and constant reboots after i completely reworked a desktop. If you plan on doing more smaller builds i would recommend this, just make sure you have adequate space so you are not cramped or has a difficult time putting one of these in. The nice thing about this one, its like a little brother, you can fit him in a micro tower cas or a mid tower and have work to work with! i been happy with it, and plan to use it on another build later n in the future.

Did you find this review helpful? Yes No

Compare Offers from All Sellers newegg

Seller Name & Rating Offer Details  
ICON Loading...
|
BUY WITH CONFIDENCE

This product qualifies for Newegg's Price Match Guarantee. We'll match any qualifying competitor's price. Learn More

Volume Discounts Available
  • 2-5 $20.79 ea.
  • 6-10 $20.49 ea.
  • 11+ $19.99 ea.
Selected Items

Best Service Sellers

Are you an E-Blast Insider? Subscribe Newegg e-Blast
PayPal
Shop without retyping payment details. Secure shopping made faster.
Check out with PayPal.
Home
Home > 
Components > 
Fans & PC Cooling > 
CPU Fans & Heatsinks > 
Cooler Master > 
Item#: N82E16835103064
If the Adobe Reader does not appear when you click on a link for a PDF file, you can download Adobe Reader from the Adobe web site.