Features:

Plug and Play;
Compatible with OBDII or EOBD capable vehicle;
Auto power on and off with the vehicle.

Technical parameters:

Alarm decibel:>=30dB(A)

Work voltage:9V~16Vdc(12Vdc/400mA)

Product dimensions:12.5*7.5*1.5(cm)

Product weight:110g


Package Included:

1 x Vibob E300 Head up display

1 x ODB data line

1 x Reflection paster

1 x English User Manual



Display Content:

Speed, engine rotational speed, water temperature, battery voltage,

instantaneous fuel consumption, average fuel consumption, local time,single driving time,

mileage measurement, shift reminder, fatigued driver reminder, low voltage alarm,

high temperature alarm, speed alarm, engine fault alarm, fault code elimination,

ability to change units e.g. Kilometre/mile;



HUD installation procedure:

1.Ensure your vehicle is OBDII compatible or EOBD.

a. Check around the area under the steering wheel for an OBD plug;

b. Contact your vehicle manufacturer or search online;

c. Open the bonnet and look for a OBDII compatible sticker

(this is NOT on all OBDII compatible cars, therefore isn't a deciding factor);

2.Locate the 16 pin diagnostic link. This is usually located in the area under the steering wheel.

3.Start vehicle's engine and ensure power switch is in the on position.

4.HUD will power on with engine;

a. If the HUD displays vehicle voltage, fuel consumption,

speed and rotational speed the unit has installed correctly.

b. Failing the above: Wait up to one minute for software to sync

and confirm OBD cable is plugged in properly.



Reflective film installation:

If you see a double layer, you should install the film by the instructions.