Board Specifications
• Processor: ARM7 900Mhz CPU
• USB: Four USB 2.0 Ports
• Ethernet: 10/100 Ethernet Port
• Video Output: HDMI and Composite
• Sound: L/R Stereo
• Memory: 1GB Ram
• Operating System: Uses microSD card slot to load O/S
• Digital interfaces: 2 onboard ribbon slots for Camera and Display
• GPIO: 40 GPIO pins, backwards compatible to B and B+ board

Operating System Specifications
Operating Systems included on card
Raspian
Arch
Pidora
RiscOS
OpenElec
Rasbmc

*Not all Operating Systems are compatible with the Pi 2 right away, check at Raspberrypi.org for compatiblity

Note: A ethernet connection must be detected for all O/S options to appear in the boot menu. If no ethernet connection is detected, only Raspian will be shown.

Official Raspberry Pi Case Features:
- Official case for the Raspberry Pi from the Raspberry Pi Foundation
- 5 part enclosure
- Removable Lid for easy access to the camera and display ports
- Removable Top Frame
- Removable Side Panels with easy access to the GPIO port
- Designed with Pi HAT's in mind
- Dimensions: 96mm x 70mm x 25mm
- Compatible with the Raspberry Pi 2 Model B and Raspberry Pi Model B+

Note: Model A+ Boards will fit in this case however the USB port is recessed inside the case.

PSU Features
This adapter was specifically designed to provide 5.1V not 5V, but we still call it a 5V USB adapter. We did this on purpose to solve a problem that occurs often with USB-powered gadgets: they draw so much current than the resistance of the cable causes a voltage drop, so instead of 5V, the device sees 4.75V or so. To avoid this problem, we made the adapter 5.1V and the USB cable has extra-beefy 20AWG wires! This way, even at a full 2 Amp draw, the voltage at the end won’t be lower than 4.9V

This high quality power adapter is FCC, CE and UL listed and can use 110 or 240 VAC input so it works in any country.