IN WIN MANA136 WHITE SEEC ATX Mid Tower Computer Case

Pros: ITs a good case, fans that come with it do the job and are fairly quiet. The side panel is a little confusing if you're going to mount fans on (hard to find the right mounting holes) and it has some very nice interior. Cable management is ok, i have seen better and the front of the case it a little bit hard to get off. I do recommend this case to anyone willing to do a little work with it!

Cons: Water cooling holes are all metal, prone to scratching after awhile

Other Thoughts: None

Pros: Pretty roomy.
Looks great.
Built in SATA power and data cables for two of your 3.5inch slots.
Lots of places to tuck cables.
Fantastic airflow.
Seems sturdy enough.
USB 3.0 on the front.
Comes with TONS of screws + thumb screws!!

Cons: Front panel is plastic.
Power and reset buttons are a little weak feeling.

Other Thoughts: My mobo I purchased with it doesn't have a USB 3.0 header, but other than that it is great. Didn't have risers for my mobo in some spots, but again that is a problem for the small mobo I purchased, not the case itself.

Highly recommended case.

Pros: Case gets lots of great comments on looks! Performance is excellent. Case was well thought out and all functions wonderfully. Kudos to INWIN for getting it RIGHT!

Cons: NONE

Pros: Its a nice, sleek white case. The front face is plastic, and the rest metal. The dust-filters are super convenient, and easy to clean.

The blue LED fan isnt as bright as I thought. I actually kind of like it. I did have to tape over the power and activity LEDs, though. They were obnoxiously bright.

The case is spacious for a mid tower, and the cable management is nice. The side panel is nearly half open, which gives it some good airflow.

I like the look of a white case. Its tough finding one that is affordable, has good compatibility/features, and doesnt look terrible. This was the best one I could find in all of the above categories.

Cons: None.

Other Thoughts: You might need a full tower if you plan on doing an SLI build.

This is good for now, but if I upgrade I dont know if I'd feel safe with two GPUs jammed next to each other unless there was a bit more breathing room.

Pros: Looks great, feels great, good weight (not too heavy but doesn't feel like a brick), great texture, and overall great build quality.
It comes with built in standoffs.
Not crazy expensive.

Cons: Comes with built in standoffs and I didn't know so when I opened the case I saw there wasn't any and went out and bought some.
Only comes with 1 120mm blue LED fan

Other Thoughts: Overall very happy with the different look and different feel of the case. The blue LED's look great with the white and I'm very happy.

Pros: -Color (I love the black on white color)
-Fans are very quiet, front fan is Blue LED
-5 more spots for fans
-Solid internal construction
-Has 2 slots with sata and power plugged up for hotswap HDDs

Cons: When all of the components are in the computer, if you have it set on carpet it leans to the right a bit, but thats just my fault for having it set on carpet

Other Thoughts: Also, the side panel has a lot of holes, and you can actually make a 140mm fan work. I bought a Cougar 140mm and it comes with the rubber attachments, allowing me to mount the 140mm fan even though the holes dont line up perfectly.

Pros: First off, the case came in perfect condition, unlike the last two Raidmax cases i've purchased. The quick change hard drive setup is awesome and support for SSDs is a plus. This case also has amazing cable management, with a tube type thing that hides all the wires. Fans are quiet, this was noticeable once I added my own fans which are not quiet. Case cools VERY well, about 4-7 degrees celsius cooler than my old Raidmax.

Cons: The only real con I can think of is it could have came with more fans. It only came with one front L.E.D 120mm and one rear 120mm. My Raidmax' came with 5 total, both have room for up to 6.

Other Thoughts: All in all a great case at a very low price :) Is better than any of the 5 Raidmax cases I've owned in every aspect! I think I will be using this brand or Thermatake in the future.

Pros: -Comes with rear fan and front fan
-Comes with 2 nice dust filters
-Nice room to install 5 more fans (12CM )
-Looks great

Cons: -Could use a bit more room
-Could use 2 front fans or so
--The wire for USB 3.0 didn't have a place on my Motherboard

Pros: Looks great! Typically InWin quality build. USB2 and USB3.0 front ports.

Cons: SSDs have no where to install. Even with an adapter mount, an SSD still doesn't line up properly to use the pre-installed power and SATA HD connectors.

Preinstalled with only 2 fans.

Other Thoughts: I expected a lot more for a near $100 case. Although I'm an InWin fan (built over 10 in the last year), I'm quite disappointed with what I got for the steep price.

Pros: Rough texture = No Finger Prints
120mm Fans
Light Weight
Looks Cool

Cons: cable management
HDD Tool-less design
BRIGHT POWER LED

Other Thoughts: This case was used for my second custom build. The rough white texture means no finger prints on the case, its quiet with the 120mm fans, the tool-less 5.25 drive bays are nice and snug so the drives wont move, so no need for screws, over all looks really nice.

But my biggest problem is the small channel they give you to run the cables next to the motherboard. The cable management holes were off-set by a 1/2 inch upward from my motherboard connectors so all my connections are bent slightly to get them to fit, not to bad but doesn't look that clean. The side panels can be a little annoying to get on sometimes. The Tool-less HDD bays are not fully tool-less. You have to put 4 screws into the hard drive and slide it into the bay, which in my case the WD Black drive would vibrate because of metal to metal contact, so i had to mount it traditionally to the HDD cage. The power led is BRIGHT and the front 120mm fan is molex connector