IN WIN MANA134 Black SEEC Steel ATX Mid Tower Computer Case

Pros: Space for 7 120mm fans, not 5 like I said in my review below.

Cons: None

Pros: Decent cable management for the price. Sturdy construction. Painted black inside and out. Tool free drive mounting. Space to mount 5 120mm fans if you love the sound of rushing air.

Cons: Side panel overlaps the scew holes for the rear fan mount. Wouldn't normally be an issue, but I used a water cooler and the fan/radiator mount screws interfered with it. Still got it on and isn't completely the fault of the case (water cooler should have come with countersunk screws at the correct length), no no egg loss here.

Other Thoughts: I built a pc last year using a Rosewill FUTURE mid atx case and this one is it's twin except the plastic front panel is updated. There's 171 reviews on that one if you need more convincing. http://www.newegg.com/Product/Product.aspx?Item=N82E16811147108

Pros: Fits my 6870 double d without any issue. Seems to have good air flow. Overall I feel satisfied with my 1st case purchase. Plenty of space/racks for hds. cable ties included.
Front usb section is really convenient.

Cons: I'll say that this is probably some user-laziness here, but case has gotten much louder as of late. Will go through and dust/clean the case in the next week or so

Other Thoughts: When I first started putting together my first pc I thought I would just get a cheap case, which I was able to pick this up for cheap after rebate. I have no qualms with this case, but after spending sometime with it, I feel like a higher quality case may have been worth the money. But this was a good first case to get

Pros: Looks nice overall and is a pretty easy case to build in,
Doesn't seem to have any heat issues,
Pretty good amount of room for expansions,
Low noise,
Good paint job.

Cons: Feels very cheap.

Other Thoughts: There are much better cases out there that are built much better for a lower or equal price.

Pros: First off...Very FAST shipping! Love the case, easy to set up all my parts that I have. Everything looks and feels perfect. Love the slick design and color scheme.
The layout for all the drives are perfectly placed. Plenty of room for cooling fans.

Cons: None that comes to mind.

Other Thoughts: Could not be more happier with my purchase of this case. I searched through hundreds of cases until I found this one, everything I expected and more. Highly recommend getting this case through Newegg...fast shipping is a plus too!

Pros: I think I was able to get this case on a special deal for $35. I wasn't expecting much, I saw that it had some USB 3.0 headers and figured I wouldn't find much else in that price range with quite as many drive bays and headers. It's been about 2 months, and I continue to be surprised by the number of ways this case makes everything awesome. I didn't skimp on much of my build, so the fact that I have a modular power supply helps the cable management, but for everything else, while I'm sure higher end cases make it easier, I couldn't design a case myself that allowed for better cable management of the medium-high end PC. Hard drives slide in and lock, each panel comes off without any issue, or tools, for that matter, there's plenty of space for up to 7 120mm fans, and overall gives a nice finish to my build. (Cables can be tucked away on top of the motherboard, down the side of the drive bays, or down the designated corridor behind the bay area.) I had no idea how much I would enjoy opening up this case and.. tinkering.. until I did.

Cons: I am not sure whether or not this is a sizing issue with my mobo (Gigabyte GA-Z77X-D3H) or the case itself, but some of the screw ports on the board didn't line up with the raised points in the case. This hasn't been an issue, but it still would be nice to know that my mobo is completely clamped down.

Pros: In-Win make great cases, they are very rugged,, lots of
room inside for easy building and affordable prices too..
Lots of air-flow and 7 cooling fans can be installed..

Cons: I own 2 In-Win Fanqua cases myself and my complaint is
either the prices have increased out of proportion or there
are none to be found on any web-sites i've been to.

Other Thoughts: I can only hope that In-Win will continue to build the
Fanqua computer case,, i would hate to see this case go
off the market for no reason at all..

Pros: This case has plenty of room for a fullsize ATX motherboard, and more than enough room for larger graphics cards. 7 places to mount fans made my day!

Cons: hard drive retention rails do not do a good job of keeping the drive stable. I am able to wiggle the drive up and down once locked in. This matters not as with a single screw, it's mounted in there real good. I had to do this for all 5 of my hard drives. Not taking off an egg because the option to do such is there.

Also, the front only fits 120mm fans that are SQUARE. the round ones (i.e. Antec TrueQuiet 120) do not fit in the front. This made finding quiet fans to place up front very hard.

Other Thoughts: This is a great case for any kind of board and larger cards. plenty of places to hide cables and tie cables to, and the thing looks great overall.

I was able to fit a Tyan K8WE S2877 in mine with two Opteron 285's.

Pros: not bad looks cool room for xtra fans usb3 w header/ got rebate card 9/4/12 four mths & emailing company like pulling teeth.

Cons: small mid tower lite weight metal cramped if using full size stuff great for fm1 boards there small with crossfire on a micro board.

Other Thoughts: use a moddular psu & don't use the giant coolers . nice but small/ limited room.

Pros: enough room, excellent ventilation, decent cable management, nice usb 3.0 access on io panel, looks like a Decepticon staring down RaptorJeezus

Cons: needs mesh filters, only 1 led fan in front

Other Thoughts: This was my first time building a desktop and this case made the process so easy and FAST I couldn't believe it. It was finished in under 45 minutes and had ZERO hitches. Working in this case was headache free due to the ease of access and adequate cable management. I recommend this case to anyone that wants a hassle free case with super low case temps and compliment inducing good looks.

My build:
InWin Mana 134 black
Asrock mobo
8 gigs gskill 1600
I5 2600
1tb sata hdd
120gb corsair ssd
still undecided on a gpu and cooling solution and will be adding more ssd capacity