Skip to: |

Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.

If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.

Newegg.com - Computer Parts, Laptops, Electronics, HDTVs, Digital Cameras and More!

Sign up today for a 30-day free trial of Newegg Premier
  • Shipping Destination: United States
  • Wish List
  • Feedback
  • Help
Search all
Search
Home
Home > 
Computer Hardware > 
Computer Cases > 
Computer Cases > 
In Win > 
Item#: N82E16811108420

In Win Z583 micro ATX Case with Haswell Ready 350W power supply, Black, TAC 2.0, Front USB 3.0X2, HD audio

  • Steel MicroATX Mini Tower
  • USB3.0 x 2 , HD Audio Front Ports
  • 350W Power Supply
  • 2 External 5.25" Drive Bays
  • 1 Internal 3.5" Drive Bays
IronEgg
BUY WITH CONFIDENCE
This product qualifies for the Iron Egg guarantee. We'll match any qualifying competitor's price.
  • Pin It
  • Email this page
ICON Loading...

 
  • Tool-Free Installation and Easy Maintenance
  • Best Performed SECC Japanese Steel Metal
  • Excellent Thermal Solution

Features

TAC 2.0 Thermal Solution

TAC 2.0 Thermal Solution

Qualified for TAC 2.0 with a mass ventilation hole side panel design to strengthen thermal efficiency and cool down the entire system.

Cooling Fan

Cooling Fan

Optional 90mm auxiliary cooling fan at rear panel for better system cooling. The rear fan slot can also accommodate 80mm fan.

Tool-Free Installation and Easy Maintenance

Tool-Free Installation and Easy Maintenance

Screwless front panel, side panels, 5.25" drive bays, 3.5" drive bays, and PCI-E expansion slots

Configured Six Drive Bays

 Configured 6 Drive Bays

5.25" x 2, 3.5" x 3 and 2.5" x 1 drive bays for expandability of future upgrade.

Side Panel Clips

Side Panel Clips

Patented tool-free installation side panel clips.

Front Ports

Side Panel Clips

The front panel offers I/O ports including 2 x USB 2.0/USB 3.0 (USB 3.0 on Z583.CH350TB3 only) interfaces, and HD audio jacks.

Superior Construction

  • Best Performed 0.8mm SECC Japanese Steel Metal.
  • 0.8mm sheet metal construction - for better stability & durability.
  • Folded Edge - for safety installation. No sharp edges, debris.
  • Stamped Motherboard Support - no MB standoffs installation required, for faster MB installation.

Security

  • Standard Padlock Loop for Padlock
  • Kensington Security Slot Supported
  • Chassis Intrusion Switch (Optional)

Optional

  • eSATA
  • 3.5" to 2.5" HDD/SSD Bracket: Supports 2.5" x 2 and optional 60mm fan
3.5

Specifications

Case Size Mini Tower Chassis
Color blackwhite
External Drive Bays 5.25" x 2, 3.5" x 2
Internal Drive Bays 3.5" x 1, 2.5" x 1
Front Ports USB 2.0 x 2, HD Audio
Dimensions (H x W x D) w/o Front Panel 14.3 x 7.1 x 14.6" (363 x 180 x 370mm)
MB Form Factor Micro ATX / Mini-ITX
I/O Expansion Slots PCI-E Expansion Slot x 4
Power Supply ATX 12V Form Factor, PSII Size
Thermal Solution Supports 80mm or 90mm Rear Fan
Intel Certified TAC 2.0
Safety Meets RoHS, CE and FCC Class B Requirements
Security Padlock Loop / Kensington Slot
Optional 80mm or 90mm Rear Fan
eSATA
Chassis Intrusion Switch
3.5" to 2.5" HDD/SSD Bracket

The actual product is subject to change without prior notice.


Learn more about the In Win Z583.CH350TB3

Model

Brand
IN WIN
Model
Z583.CH350TB3

Spec

Type
MicroATX Mini Tower
Color
Black
Case Material
Steel
With Power Supply
IP-S350CQ2
Power Supply
350W
Motherboard Compatibility
MicroATX
With Side Panel Window
No

Expansion

External 5.25" Drive Bays
2
External 3.5" Drive Bays
2
Internal 3.5" Drive Bays
1
Expansion Slots
4

Front Ports

Front Ports
USB3.0 x 2 , HD Audio

Cooling System

80mm Fans
No
90mm Fans
1 x 90mm Rear Fan
120mm Fans
No
Side Air duct
No

Physical Spec

Dimensions
14.3" x 7.1" x 14.6"
Weight
17.00lbs

Features

Features
Haswell compatible

Best Performed SECC Japanese Steel metal.

0.8 mm Sheet Metal Construction - for better stability & durability.

Folded Edge - for safety installation. No sharp edges, debris.

Stamped Motherboard Support - no M/B standoffs installation required, for faster M/B installation.

Configured 5 Drive Bays - (2 x 5.25", 3 x 3.5") drive bays for expandability of future upgrade.

Meets RoHS, CE and FCC Class B Requirements.

Quick Info

Warranty

  • Limited Warranty period (parts): 3 years
  • Limited Warranty period (labor): 3 years


Customer Reviews of the In Win Z583.CH350TB3

Do you own this product?

ICON Loading...

Filter Results

Go
  • Trevor S.
  • 12/10/2013 10:43:10 AM
  • Tech Level: Somewhat High
  • Ownership: 1 week to 1 month
  • Verified Owner

4 out of 5 eggsVery good valule case

Pros: Come with a reasonable 350W PS which is fine for many applications, in my case an HTPC. With a microATX board there's plenty of internal space. The plastic fasteners generally work well, and the included fan seems solid. The front panel USB3 ports connect via a cabled connector into the board header -- clean and works great.

Cons: I found four cons, none critical. One is that it's not clear how to open the side panels. Turns out the plastic pieces at the rear need to be pulled outward to release the panel, and then they need to be rotated about 45 degrees to remain released. Don't remove them, just rotate them part way.

Next is something's amiss with the fastener layout for the 3.5" drive bay. It uses two relocatable push pins that are intended to secure the drive, but I couldn't find any position that allowed me to align both pins with drive screw holes. I had to settle for just one pin and remove the other to avoid interference with the side panel.

Nest is there's a clever plastic clamp at the rear that secures the extension slot I/O panels without requiring screws. Problem is that if your card extends to the top of the bracket, then there's no room for the edge of the clamp. You can still close the clamp as far as it will go, but the I/O panel covers are not secure and could conceivably fall into the body of the PC. I had to just go down them installing screws, the very thing the clamp is intended to render unnecessary.

Last is simply than no hardware is included with the case, presumably because the plastic fasteners replace it? Well, that overlooks the need for screws to secure the motherboard.

Other Thoughts: Yes, I would buy the case again given a similar need, 350W is enough for most applications and the voltages are all good. I'm running an AMD A6 on an Asrock FM2+ mATX board and it's all good. I anticipate eventually upgrading to a Kaveri APU using the same setup. A good looking sturdy mATX case optimally used with mATX boards, with minor gotchas.

A further note to the manufacturer: This is my first exposure to standoff-less mainboard trays and I'm not ecstatic. Problem is in areas there is too little clearance between the underside of the board and the metal of the tray for comfort. I'd much rather have to go through the "hassle" of installing standoffs where needed and avoid any risk of accidental shorts.

Did you find this review helpful? Yes No

  • Alexander N.
  • 2/13/2013 9:27:21 PM
  • Tech Level: High
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsGood build quality

Pros: Most compact decently constructed mATX case I could find that would fit a standard ATX power supply.

Great ventilation - I run a PC with only 1 fan and my temps are ideal.

It has a handy 2.5 inch drive mount, perfect for my OS SSD - one of the primary reasons I bought it.

Cons: Comes with a power supply - I can't comment on the included unit, but it's a waste of money for me as I always buy a power supply.

Case width will not fit tall CPU heat sinks. You'll need a low profile version.

Other Thoughts: I miss the sound damping goodness of my Lian-li case. Because a HDD mounts directly to the metal chassis, there is considerable noise with use.

Did you find this review helpful? Yes No

  • Bradley C.
  • 10/3/2012 7:51:02 AM
  • Tech Level: High
  • Ownership: 1 day to 1 week

5 out of 5 eggsThe New Gold Standard for mATX cases

Pros: *Side panel clips make getting into the case simple and easy
*Front panel release mechanism inside makes cleaning dust out easy
*Included PSU has appropriate length cabling
*Power button feels very durable. As silly as this may sound I find it comforting
*2.5" drive mount is extremely clean and elegant versus every other option I've seen (3.5"-2.5" brackets, YUCK!)
*Extremely consistent build quality, I just built 7 machines, the most identical builds I've ever constructed.
*Internal USB 3.0 plug for front USB. (wrapping a USB cable through the computer and plugging it in to the back is a joke... right?)

Cons: *I'm a little unsure of putting any sort of PCI-E graphics option in with only a 350W PSU, would feel more at ease with a ~430W.
*Nearly impossible to find in the mATX form factor but I still prefer bottom mounted power supplies for lower center of gravity. That being said, this case is not in any way unstable, in fact it IS very stable so maybe this con is really just me being overly picky.

Other Thoughts: I will continue to buy this case for all my office builds until someone challenges it in the mATX market. Highly impressed with build quality, consistency, features, everything. It's a little more money than the one I had been getting but worth every penny. Also, it seems LOTS of people are building in mid-towers and full towers for absolutely no reason, I wish the mATX form factor would get more respect.

5 out of 5 people found this review helpful. Did you? Yes No

  • anthony h.
  • 9/1/2012 8:47:55 AM
  • Tech Level: High
  • Ownership: 1 day to 1 week
  • Verified Owner

3 out of 5 eggsFor motherboards with 19pin USB

Pros: Great case as always from in-win.

Cons: You must have a 19 pin USB 3.0 header on your motherboard to connect the front USB 3.0 ports to your motherboard! To connect the front ports to regular USB ports on a motherboard you will need to purchase an adapter.

Other Thoughts: This issue needs to be made more obvious in the product description. Many of us have been buying in-win cases for years without seeing changes so I got caught out. Adapters are available if you hunt around.

0 out of 4 people found this review helpful. Did you? Yes No

  • Ross E.
  • 8/7/2012 5:48:51 AM
  • Tech Level: Somewhat High
  • Ownership: 1 week to 1 month
  • Verified Owner

4 out of 5 eggsNice MicroATX Case

Pros: One of the smaller MicroATX Mini Towers.
Mounting for 2.5" SSD under 3.5" external bay.
USB 3.0 on front.

Cons: Internal 3.5" bay is kind of awkward, especially if you are using a 2.5" drive as well. I put my 3.5" drive in the external bay, but had to add a mounting screw so that it would fit between the case front and the memory.

Other Thoughts: The fan isn't super loud or super quiet. Can't decide if I'll replace it or not. I think this is a nice case if you are looking for a smaller than standard form factor, but don't want to get really cramped.

1 out of 1 people found this review helpful. Did you? Yes No

ICON Loading...
Are you an E-Blast Insider? Subscribe Newegg e-Blast
PayPal
Shop without retyping payment details. Secure shopping made faster.
Check out with PayPal.

Home
Home > 
Computer Hardware > 
Computer Cases > 
Computer Cases > 
In Win > 
Item#: N82E16811108420
Related Products
Steel MicroATX Mini Tower USB 2.0 x 2 ...
On top of COUGAR power supply unit, the ...
In Win turned their attentions to the HTPC ...
The Rosewill 600 series computer case is a ...
Shop by Region: United States | Canada | China
VeriSign Click for the BBB Business Review of this Computers - Supplies & Parts in Whittier CAThis site protected by Trustwave's Trusted Commerce program Inc500
Policy & Agreement | Privacy Policy  © 2000-2014 Newegg Inc.  All rights reserved.
If the Adobe Reader does not appear when you click on a link for a PDF file, you can download Adobe Reader from the Adobe web site. nassau