COOLER MASTER HAF XM RC-922XM-KKN1 Latch Side Panel w/ 2 x 200mm Fan Black Mesh, Plastic, Steel ATX Mid Tower Computer Case

Pros: Hooked up 2x 120mm fans to top and took the 200mm fan from the top and put it on the side panel. Also took 1x 120mm and attached it to the drive bay.

Now my temps on my O.C. Q6600 clocked from 2.4 MHz to 3.4 MHz at 1.45v.

OLD case max temp full load 68°c.

NEW Haf xm Max temp full load 58°c.

A freaking 10°c improvement.

Cons: Was broken like my previous review. To mount 120mm to the top and or the side with the 200mm you have to buy nuts for the mounting screws. The bolts they give you do not screw into anything... fail...

Other Thoughts: Freaking tank.. No make pop tarts.

Pros: Love the case great air flow and ABSOLUTLY LOVE the red LED fans and make everything better.

Cons: None Really, only problem was putting two 200mm fans on the top just had to turn side ways and we were good!

Pros: Great air flow and great cable management. plenty of drives as well as fan mounts. Runs cool with just stock fans and pretty much silent. Has filters over intakes. Overall great case.

Cons: Super large... Pretty much a full tower.

Pros: Ok so this is a cooler master case. It is obviously good. If you want a case that is sturdy and extremely customizable and can fit pretty much any hardware you can think of, this is the case for you. Oh yeah, it also keeps all your hardware nice and cool, and mostly dust free, mostly. You will love this case.

Cons: front plastic face cover vibrates a little.

Other Thoughts: The only con is that the front plastic face cover vibrates slightly by the fan and you can hear it. It is not the fan, it is the case because you can press on the lower part of the case and it is quiet. Not a big deal though considering the case as a whole is really quiet.

Pros: Huge, should not be called a mid tower. My old antec 300 would fit inside, and that was a big case. Great to build in. Very quiet, creepy quiet. My 3770 setup hasn't gotten over 50c.

Cons: Drive bay is not removable, one side comes off so you can fit a huge video card. Massive airflow compensates for that, though.

Other Thoughts: Great case, may not need to buy another when upgrade time comes. I said that last build too.

Pros: Plenty of room for everything that I have to put in it. Air flow is great no matter which way that you have your fan setup. hot swap bays are nice, I'm sure that I'll use them some day.

Cons: None

Pros: Very nice looking case. Spacious, lots of build flexibility. Quality construction and a decent price.

Cons: Nothing specific. No complaints.

Other Thoughts: Shipped promptly without damage through FedEx. Very satisfied with purchase and Newegg.

Pros: Grommet-ed holes for cable management, lots of room, xdock, silent, spacious, beveled edges, roomy, and did I mention how much empty space there is?

Cons: big for a midsize tower, it is as big as my old Thermaltake Xaser III full tower case, if not bigger. The top xdock bay has issues fitting an hdd, but the lower works just fine.

Other Thoughts: I purchased this case because it can support up to 4 200mm fans. I'm coming from the Antec 900, which was a good case but with so many smaller fans spinning at 1500-2000 rpm, it sounded like a jet engine in my room. My previous review was 1 egg because I received a defective case. Newegg, being awesome as always, quickly RMA'd the case and I had my replacement within one week.

The airflow in this case is amazing, everything runs super cool.

Pros: Nice coating/paint. Very nice overall look. The fans are in optimal positions to get you started with good air flow with plenty of room for expansion regardless of which cooling method you choose. Has a working quick release latch on the side which I don't find to negative on the overall appearance. Has a nice solution for hiding excess cables from your PSU that will bump up against your PSU. (adjustable)

Cons: When opening the case, 2 plastic screw sets or pins fell out. So far, I can't find anything that is loose due to the damage. They removed the easy fill cap by the power button.

The frame was slightly bent where the door was not properly attached before packaging and shipping to my door. Was easily fixed, but not exactly what you're looking forward to dealing with.

Other Thoughts: Inspect this case (as well as any other case) VERY carefully when it is delivered. I have had 2/3 prior Cooler Master cases show up thrashed (not including this case) and one Apevia delivered in poor condition. A lot of times, you can deal with it and it's not noticeable for the most part. However, it's still disheartening. Regardless of which brand you buy, or who you have ship it, cases arrive bent or broken on a large scale of severity. The outside of the package can look fine, while the case inside is non-repairable. Be aware of this before you let it sit past it's return grace period. It would be nice to see couriers and manufacturers put a little more effort into keeping your case in one piece, but I doubt we ever see that day.

That little rant aside, for a mid-sized case this is on the larger end of the scale. For some this is a plus, for others a con. For me, I'm wary of it. I'm hoping to have plenty of length on my CPU power to be able to wrap it behind the motherboard without any issues.

Pros: Lots of space, Bubble on back panel is AWSOME for wires, quality.

Cons: Broken... The top panel, the bracket that holds the screw in place was bent in factory and broke half of the indent peace for the screw hole. It wouldn't surprise me if the person packing it didnt notice because it was a seamless break. No damage to box or foam packaging so was a factory mess up. Nothing a little super glue wont fix.