NZXT SWITCH 810 Black CA-SW810-B1 Steel / Plastic ATX HYBRID Full Tower Gaming Computer Case

Pros: Lots of room for radiators, BIG video cards, and a Kabillion HD's. Great cable management room and plenty of places to tie cables down which makes cable management easier. I like that you can completely disassemble the case and build it back like you want to fit your rig layout plans. Looks great on outside too, I like the clean look where everything is tucked away but still easily accessible.

Cons: None except like someone said before... keep a cloth around to wipe off the fingerprints your 6yr daughter leaves behind on that glossy finish.

Other Thoughts: I have 2 BIG HD6970's in there with plenty of room. My cpu is water cooled and there are several radiator mounting options. Toolless design is nice as well. I have used Antec 1200 cases for prior builds and always liked the room (this case is BIGGER)and it's one of the coolest (temp-wise) cases around. While this case doesn't have the air flow that the Antec does, it still stays pretty cool inside. Get this case, you won't regret it.

Pros: - It looks incredible. The overall style of the case is great, looks nice, and is very sturdy.
- The design of the front intake fans and the fans attached to the hard drive bays provide a great push-pull air flow to cool off the drives ever so slightly, whilst giving the case in general great air flow.
- The ease of remove the bays, and the exterior pieces of the case is amazing. I can tell you from my experience (see other thoughts) this came in handy quite a bit.
- In general, there's a good amount of space and high cable management potential

Cons: - If you go with a top 420mm radiator, you will lose the top drive bay, often for a dvd drive. I wasn't concerned, I had an external drive to use.
- The bottom space for a radiator CANNOT hold the Black Ice GT Xtreme 280mm radiator. Albeit, that one is on the thicker side of things, there just wasn't space and the holes were not aligned. See Other thoughts for my solution.
- I personally did not have much space left, see Other thoughts for more details.
- The back side for cables did not give me much space to through everything in.

Other Thoughts: So here's my story: I wanted a new PC that had a water cooling loop. My friend recommended this case (I was looking at the AZZA Genesis 9000). So I decided to get this, since it really looked nice. So I purchased everything and waited for the build day. Honestly, any errors were on me, I didn't do enough research on the case and LC parts to actually know what I was doing.
So first things first, I noticed that there was no way to get the Black Ice GT Xtreme 420 rad in. I ended up dismantling the entire exterior and unscrewing the top of the case. The plan was to have a push-pull setup, with 3 fans on the outside of the case (Under the detachable top fin slot thing. The default screws with the radiator were too short, so I made a trip to Home Depot. I managed to attach the the fans on the top, then the radiator and fans below the radiator. But it would not fit. So, I was forced to take out the top drive bay in order to fit the radiator in. Then, I had taken out the bottom drive slot to put my 280mm radiator in. However, the 280 rad would not actually fit in the case without some extreme modding of the case. I decided I would go to a 240 rad when I had a stroke of genius. The two fans attached to the drive slots. With some more screws from Home Depot and a bit of work, I managed to attach the 280 rad to the two drive slots, while still having the fans attached as well. I wanted to go with a push-pull setup, as there was just barely enough space between the radiator and my GTX Titan cards. I opted not to add in the extra cards. After I managed to get everything in, and the loop perfect, the case looked fantastic!

Pros: -The case is big and spacious.
-Black interior.
-Cable management is great.
-Can accomodate the biggest air coolers out there with ease.
-The rubber grommets are very durable, they can withstand abuses.
-The case is sturdy, it's like a tank on my desk lol.
-The hard drive mounting system is great.
-Good airflow.
-The fan inside the case help cool the gpu by several degrees Celsius.
-It's just an over all great case. It is well build and easy to work with. -You can take it appart(remove pieces) in a few mins , and just have the body, naked!
-Fan filters are effective, they catch a lot of dust. The case doesn't get that dusty compared to other cases I've had, this is a big plus for me.
-Looks awesome, I like what they did with the plastic, it has been used in a very stylish way.

Cons: -The case does use plastic for the front and top panel. These should be taken care of since they are a bit delicate.
-It is heavy!
-The case does not have too much room behind the motherboard tray,considering the size of the case, but this also has an advantage because you have more room for tall air coolers. Half an inch more would have been perfect.
-The fans are connected to a splitter which is attached to the back, and it is being powered on with molex - I can't adjust the fan speed because of this , they always run at full speed, unless you purchase one of those 3pin splitter to pwm so you can control the rpm in the bios. You can also plug every fan on the fan headers on the mobo but that will look terrible and cluttered. The included fans are also loud.
-The power btn feels cheap, it's one of those springy plastic things where you have to push hard for it to register and sometimes it doesn't even work.

What is the worst con in here? The power btn, by far. Maybe I'm being too picky but I like the buttons which just click without springs.

Other Thoughts: This is an excellent case, but has the normal cons other cases have in this price range. I got it for $120 last year on a holiday deal, so it was definitely worth it. The case is ridiculously big in my desk. It is also heavy and sturdy, it is made of thick steel I think, however I'm no expert.

I recommend this case to every one!!!

Pros: Big

Cons: I gave it 2 stars the first time, but now am so tired of the poor internal drive access, I go down to 0 or minus stars if I could. Cloning the (internal) C:\ drive and then testing the clone's ability to boot should be a matter of swapping cables - but not using this case. While enabling cable management for some, NZXT has figure out the one way it couldn't be worse for others.

Other Thoughts: Anyone wanna buy a 4-month old computer case?

Pros: Cable management
Solid construction

Cons: Top vent is hard to move and feels cheep

Other Thoughts: Fits a duel CPU setup with quid SLI with room to spare :)

And I got the case in 1 day from egg saver shipping awesome job newegg

Pros: Sturdy case. Clean lines, just how I like it. Not gaudy or bulky. Great cable management with lots of room and access gromits. Great options for fan placement and/or radiators. Overall awesome case!~

Cons: Keep a microfiber towel handy, this shiny guy collects dust and loves to flaunt it. :) White or Matte Black might do a better job hiding it for sure.

Pros: Space/everything nice ill be running 3-crossfire in the future so plenty of room no matter how long the card, lol. Nzxt should never stop making this case! If you never want too worry about expanding and like a nice Pc case this is the one! Looks Nice more than photos! I have Glossy Black one looks great. =D

Cons: Big for transporting an pop out panels pops apart easy, but i just keep the box for that an wrap it in foam. Nothing really!

Other Thoughts: nothing really, I am very satisfied this will be my case for years to come... future proof!

Pros: Bought this case for a friend of mine. He absolutely loved the size of the case. Was able to fit all of his components, and video cards into this case with ease. He also used the box as a baby gate for a while.. lol

Cons: None

Pros: Very good quality. Great paint job very good fitting parts. Lots of versitility and case seems very professionaly designed for professional use.

Cons: Not enough drive bays. Also why do all case manufactuers always short change you on case fans. Power light and hard drive light are on top of the case. Instead of the front. No way to tell this when you look at the case on line.

Pros: The size of this is amazing,full of space and great for airflow.
Top 10 best features:
1.) Triple 140mm radiator capable at the top of the case
2.) Oozes quality (finish, style, design, and features)
3.) Ton's of rubber grommets to hide cables
4.) 8 PIN Mo.bo. extension for the PSU
5.) Lighting on the back near the IO panel
6.) Large cut out on the back for the back plate install
7.) Forethought on removable top section 5.25 bay wall
8.) Best Tool-less implementation for the 5.25" bays I've seen
9.)Fan filters! all over! easy to clean and take off!
10.)flip up front panel with usb's and card reader.

This case is wonderful despite its flaws, a real contender for my favorite piece of tech for my latest build, its a real pleasure to work in this case.

Cons: back fan area with 140mm or 120mm doesn't have room for 2 120mm fans and leaves a gap regardless of fan choice.

Plastic is a fingerprint magnet

the slide at the top of the case is a bit too stiff!

grommets could use thicker / stronger rubber

use of the 3x140mm rad renders the CD-rom door useless.

NO CASTERS!!!

Other Thoughts: if this had casters and thicker grommets i would give it 6 eggs!

Great product NZXT!