Skip to: |

Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.

If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.

Newegg.com - Computer Parts, Laptops, Electronics, HDTVs, Digital Cameras and More!

Sign up today for a 30-day free trial of Newegg Premier
  • Shipping Destination: United States
  • Wish List
  • Feedback
  • Help
Search all
Search
Home
Home > 
Computer Hardware > 
Computer Cases > 
Computer Cases > 
Silverstone > 
Item#: N82E16811163200

SilverStone SST-RL01B-W-USB 3.0 Black Steel / Plastic ATX Mid Tower Computer Case with Side Panel Window

  • Steel / Plastic ATX Mid Tower
  • USB 3.0 x 2, Audio x 1, Mic x 1 Front Ports
  • 3 External 5.25" Drive Bays
  • 5 Internal 3.5" Drive Bays
  • Pin It
  • Email this page
ICON Loading...


INTRODUCTION

SST-RL01B-W-USB

The Redline series was created with the goal of exceeding customary user experience and expectations for an affordable PC chassis by offering punchy styling and features reserved often for more expensive models. The RL01, with its armed front façade punctuated by glowing red SilverStone logo that doubles as a power button and red LED fan has an exciting presence that will surely raise the adrenaline of PC enthusiasts. Its bottom mounted power supply layout and flexible drive storage options enable it to support a wide selection of components. The top, front, and the bottom side of the RL01 are also fully filtered to ensure that positive pressure setup, a prominent feature in SilverStone's high-end chassis, is a viable option for creating a dust-proof PC. For enthusiasts looking to build a PC with quality features and styling on a budget, the RL01 is an excellent choice.


SPECIAL FEATURES

SST-RL01B-W-USB
  • Fantastic style with glowing button and red LED fan
  • Positive-pressure design for effective dust reduction
  • Removable magnetic dust filter for top and bottom vents
  • Smart, backside cable-routing design
  • Motherboard backplate opening for quick CPU cooler assembly
  • Supports easy access to drive bays with tool-less design


SST-RL01B-W-USB
  1. Extra large fan filter (2 x 140mm) on top intake vents
  2. Rear 120mm fan slot
  3. Room for cable management behind motherboard tray
  4. Extra large motherboard tray cut-out for CPU cooler backplates
  5. PSU slot on the bottom panel for better overall cooling
  6. Fan filter for power supply intake area
  7. Five tool-less 3.5" drive bays
  8. Quiet 120mm red LED fan included
  9. Glowing red SilverStone logo doubles as a power button
  10. 5.25" drive bays with tool-less locks
  11. Top-mounted I/O ports include microphone, audio, and two USB 3.0 ports

SPECIFICATIONS

Model No. SST-RL01B-USB2.0
SST-RL01B-W-USB2.0
SST-RL01B-USB3.0
SST-RL01B-W-USB3.0
Material High-strength plastic and meshed front panel
Motherboard ATX, Micro-ATX
Multimedia --
Drive Bay External 5.25" x 3
3.5" x 1
Internal 3.5" x 5, 2.5" x 1
Cooling System Front 1 x 120mm red LED intake fan
Rear 1 x 120mm fan slot
Side --
Top 2 x 120mm or 1 x 120mm and 1 x 140mm fan slots
Bottom 1 x 120mm fan slot
Internal --
Expansion Slots 7
Front I/O Port
  • USB 2.0 x 2 (SST-RL01B-USB2.0+SST-RL01B-W-USB2.0 only)
  • USB 3.0 x 2 (SST-RL01B-USB3.0+SST-RL01B-W-USB3.0 only)
  • Audio x 1
  • MIC x 1
Power Supply 1 x optional standard PS2(ATX)
Operating System Support --
Expansion Card Compatible with expansion cards up to 11", width restriction - 6.49"
Limitation of CPU Cooler 155mm
Limitation of PSU Unlimited
Net Weight 11.2lbs (5.1kg) (RL01B)
11.5lbs (5.2kg) (RL01B-W)
Dimensions (W x H x D) 7.6 x 17.3 x 19 inches (192.5 x 440.3 x 485mm)
Extra Support Kensington lock
Supports VESA Mount --

Learn more about the Silverstone SST-RL01B-W-USB 3.0

Model

Brand
SilverStone
Model
SST-RL01B-W-USB 3.0

Spec

Type
ATX Mid Tower
Color
Black
Case Material
Steel / Plastic
With Power Supply
No
Power Supply Mounted
Bottom
Motherboard Compatibility
Micro ATX / ATX
With Side Panel Window
Yes

Expansion

External 5.25" Drive Bays
3
External 3.5" Drive Bays
1
Internal 3.5" Drive Bays
5
Internal 2.5" Drive Bays
1
Expansion Slots
7

Front Ports

Front Ports
USB 3.0 x 2, Audio x 1, Mic x 1

Cooling System

80mm Fans
No
120mm Fans
1 x 120mm Fron Red LED Fan
Side Air duct
No

Physical Spec

Dimensions
7.58" x 17.33" x 19.09"
Weight
11.24 lbs.

Features

Features
Fantastic styling details with glowing button and red LED fan

Positive pressure design for effective dust reduction

Removable magnetic dust filter for top and bottom vents

Smart backside cable routing design

Motherboard back plate opening for quick CPU cooler assembly

Support easy access drive bays with tool-less design

Quick Info

Warranty

  • Limited Warranty period (parts): 1 year
  • Limited Warranty period (labor): 1 year


Customer Reviews of the Silverstone SST-RL01B-W-USB 3.0

Do you own this product? Write a Review

ICON Loading...

Filter Results

Go
  • Benjamin M.
  • 5/6/2014 9:21:16 AM
  • Tech Level: Somewhat High
  • Ownership: 1 day to 1 week
  • Verified Owner

3 out of 5 eggsDecent First Case

Pros: Looks very nice, worked well with my red/black theme.
Good airflow with a couple more fans.

Cons: Little to no cable management options. Feels kinda cheap, SSD mounting was one of the dumbest things I've seen on a case.

Other Thoughts: Wouldn't buy a "flashy" looking case in this price range. Go for one with good airflow and a solid construction. You'll appreciate that much more than a cool looking case.

Did you find this review helpful? Yes No

  • Shawn E.
  • 4/24/2014 5:38:35 AM
  • Tech Level: High
  • Ownership: 1 day to 1 week

2 out of 5 eggsYou get what you pay for

Pros: Black Painted Interior

Cons: Cheap quality
No Exhaust fan included
Bad layout
No cable management cut outs
Horrible SSD mounting system

Other Thoughts: I bought this case on my other Newegg account for a Customers build. I originally got it to go with the Gray/Red theme including Red LED's that I installed.

However, I noticed immediately that I didn't like this case. After building and working with many many other cases, even in this price point, I just didn't like anything about this case really. The expansion slot brackets are even break always and not exchangeable, no where to run cables for a clean look, cheap looking case from the outside, Newegg pictures make it look much better then it does in person.

You get what you pay for yea, but there is a horde of other cases in this price point that are MUCH better. My last Silverstone case in this price range for sure.

Did you find this review helpful? Yes No

  • NESTOR L.
  • 3/28/2014 7:14:34 AM
  • Tech Level: Somewhat High
  • Ownership: 1 week to 1 month
  • Verified Owner

4 out of 5 eggsGreat Case

Pros: Good case for the price. Includes a little bit of everything.

Cons: Cable management options suck.

Only comes with one fan.

Did you find this review helpful? Yes No

  • ROBERT W.
  • 3/5/2014 9:41:57 AM
  • Tech Level: High
  • Ownership: 1 month to 1 year
  • Verified Owner

4 out of 5 eggsGood, not great

Pros: Good features; if someone wants 8 or 10 drives in a small case, this can be an excellent choice.

The motherboard tray is 'cut off and rolled' near the front edge of the motherboard so there's minimal flex. This design also allows much easier access to see and install cables into the stacked SATA pedestals from the 'backside' of the case during a Build or (more importantly) during later updates/maintenance. That's a great feature.

The 3.5"-bay structure allows good airflow from the facia-mounted fan, so filling that rack with drives offers better-than-most ventilation.

Ten drives in this case isn't difficult to manage, plus there's a 2.5/SSD 'mount' on the base of the case as well.

There is also good-enough 'headroom' clearance above any motherboard's RAM slots for half-inch fans to be installed after the motherboard. Of course, it's much easier to install those first, but unlatching the RAM clamps has ample room, regardless.

The upper-facia connectors (USB 3, audio) beg this unit to be installed below a desk or on a lower shelf. But there is good distance between those and any optical drive tray that may be opened. If there are external drives attached to these front-connectors, its cable will probably NOT snag easily, therefore, because of the upward angle. Very nice.

Cons: Despite my high preference for this case, there could be design improvements, however, and some Build Process Adjustments help, too.

The case's 8" width is still a half-inch too narrow on two counts: this doesn't allow HDDs to be mounted either Nose Out or Tail Out - they can only be inserted Nose Out, meaning that any HDD maintenance requires removing both side-panels. (The Antec 302 allows both orientations, for example.)

The narrow width also means "hiding cables behind motherboard tray" is almost impossible, except for the 4 sets of Power-LED-HDD wires. Any other cables will create a bulge on the back-panel.

This narrowness also begs for 90-degree SATA cables to be used on the HDD connectors.

During the initial build process, I'd recommend not hiding ANY cables ANYWHERE. Leave them loose and flopping around.

That's because the Facia Connectors (USB 3, Audio, Power & LEDs) are connected to the Facia, and if those cables are tucked away, then it's impossible to remove the Facia without a major un-hiding, re-wiring, re-assembly process. The facia snaps in and out, securely, which allows easy access to the 5.25" bays.

If this case was a half inch (or more) wider, it would be a tremendous improvement. If the facia-connectors were installed on the case-frame instead of the facia, this too would allow quicker builds (by stuffing those cables into nooks and crannies during the initial parts installations).

1 out of 1 people found this review helpful. Did you? Yes No

  • Jeremy E.
  • 2/1/2014 3:48:26 PM
  • Tech Level: Average
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsGreat case

Pros: This is a great looking case can runs well. If you get a few more red fans it adds a lot to the case. Has good space for all your stuff too.

Cons: None at this time.

Did you find this review helpful? Yes No

  • Laura K.
  • 10/15/2013 6:54:13 PM
  • Tech Level: Average
  • Ownership: 1 day to 1 week

5 out of 5 eggsGet what you pay for

Pros: - Nice power button
- Awesome red LED on the front intake fan
- Side window
- Dust filters
- Overall nice looking

Cons: - The "no tool" hard drive and optical drive slot thingies are kinda sketch. They aren't bad, and they look cool, but they seem a bit weak. They hold everything fine, it's just the way they look.
- The front intake fan really sucks. It's like a small asthmatic rat is coughing into my case. It is almost doing nothing.

Other Thoughts: Bought this with a supercombo. Came with an AMD 8350 and a Sapphire 7850 so I didn't want to let those two go over a case. After all, what's on the inside is what really matters. You might want to add another fan to the back to make up for the front intake fan, or replace both.

Overall, you get what you pay for. I haven't had issues with the case and don't agree that it is very flimsy. It seems solid enough for me.

1 out of 1 people found this review helpful. Did you? Yes No

  • Steve H.
  • 7/30/2013 10:34:48 PM
  • Tech Level: High
  • Ownership: 1 week to 1 month
  • Verified Owner

3 out of 5 eggs

Pros: usb 3.0 x2, red led fan. nice powerbutton

Cons: Don't really like the reset button, front i/o are very plain, not very good cable management, feels very flimsy, side panel came warped.

Other Thoughts: Meh, it's alright, wish I would have gotten something better though.

Did you find this review helpful? Yes No

  • Doug Y.
  • 10/1/2012 8:40:45 PM
  • Tech Level: Somewhat High
  • Ownership: 1 day to 1 week

4 out of 5 eggsBest bang for the buck

Pros: -USB 3.0
-Well built
-Great looking window
-Good button placement

Cons: -hard rubber feet(doesn't prevent vibration or scratching)
-Lack of PSU cable hole, will get messy
-Air filter is weird, holds on with magnets, for me and my OCD, I will constantly be making sure it is on squarely.

Other Thoughts: This case, which I bought for $35 after rebate, is amazing. Has everything I could want and more. That being said, it is a budget case. That means it's kinda flimsy and just generally not super well made. There are some weird paint marks, the expansion slot covers are one time use and the feet aren't good for anything more than lifting it off the ground. But this is my first build and money is tight. Even so, I feel this case will treat me very well. Can't wait to put stuff in it!

1 out of 1 people found this review helpful. Did you? Yes No

  • Daniel S.
  • 8/21/2012 11:29:27 PM
  • Tech Level: Somewhat High
  • Ownership: 1 day to 1 week

2 out of 5 eggsLast time I buy a Silverstone case

Pros: Good looking case.

Cons: Cable management is next to impossible in this case. Case feels a little flimsier than similarly priced case by other brands.

Other Thoughts: This is the first build I did with a Silverstone casand it will be my last. The case -- advertised as an ATX mid- tower case -- did not come with enough stand-off screws for my ATX motherboard (6 supplied instead of 9). I called Silverstone and they basically told me i could purchase more standoff screws if i wanted them. Luckily i had some left from a previous build. The "tool less" design of the 5.25/3.5 bays is not a very sturdy design. I still had to use screws to hold the optical drives in place. The front external 3.5' bay is very frustrating to setup because it requires the use of a flimsy 3.5" to 5.25" adapter. Cable management was also a pain. Once everything was finally installed in the case it does look pretty good. But working with this case was probably my most frustrating build.

Manufacturer Response:

Thank you very much for purchasing a SilverStone and we apologize for the misunderstanding. If you still require more standoffs, please don't hesitate to let us know. We will send them to you free of charge.

2 out of 2 people found this review helpful. Did you? Yes No

  • Preston S.
  • 7/20/2012 2:08:12 PM
  • Tech Level: Somewhat High
  • Ownership: 1 week to 1 month
  • Verified Owner

3 out of 5 eggsHas good potential

Pros: -Plenty of room
-Front USB 3.0
-Looks great
-Light, east to carry
-Cheap
-Lots of space for 120mm fans

Cons: -Only comes with one 120mm fan, not quiet enough for good airflow.
-Didn't come with enough standoffs
-Tough cable management
-Sharp edges on the inside
-Top air filter is only held on by magnets
-PCI slot covers are not replaceable. what I mean by that is that once you take them out, you can't put them back in.

Other Thoughts: As I said, the case doesn't come with enough fans, so I bought a 4 pack of cooler master fans and the work great. I strongly suggest getting some fans if you buy this case.

Final thoughts: Good looking case for cheap, but you can see where the cut corners to make it cheap.

1 out of 1 people found this review helpful. Did you? Yes No

ICON Loading...
Are you an E-Blast Insider? Subscribe Newegg e-Blast
PayPal
Shop without retyping payment details. Secure shopping made faster.
Check out with PayPal.

Home
Home > 
Computer Hardware > 
Computer Cases > 
Computer Cases > 
Silverstone > 
Item#: N82E16811163200
Related Products
When the first Kublai series chassis was introduced ...
INTRODUCTION SilverStone's Raven Series Computer Case Black ATX ...
The RL03 is an excellent choice for enthusiasts ...
Steel / Plastic ATX Full Tower USB 3.0 ...
Shop by Region: United States | Canada | China
VeriSign Click for the BBB Business Review of this Computers - Supplies & Parts in Whittier CAThis site protected by Trustwave's Trusted Commerce program Inc500
Policy & Agreement | Privacy Policy  © 2000-2014 Newegg Inc.  All rights reserved.
If the Adobe Reader does not appear when you click on a link for a PDF file, you can download Adobe Reader from the Adobe web site. nassau