Question 1

Are the handles sturdy enough to carry the system around frequently?

Accepted Answer

All 4 "handles" are made of plastic, secured by 2 Phillips screws on each side (16 total.) It is good enough for carrying the PC short distances frequently. I have carried it with one hand before and it was fine, but the handles to have a bit of bend in them. I can't imagine anyone walking very long distances with the PC just because of the weight of the components inside.

Question 2

any chance of being able to fit a 240mm liquid cooler on the inside front of this case?

Accepted Answer

I'll go out on a limb and say NO.
In the front of the case there is a pre-installed 200mm fan which is very close to the 3.5" drive bays (can't be moved because they also serve as part of the motherboard tray). The mounting points for a 2x120mm config. aren't there and if they were the space wouldn't allow a fan and a radiator. There are, however, mounting points in the front for one 120mm or 140mm fan if you wanted to replace the 200mm fan (not recommended, most 200mm fans are super quiet and powerful). 
The top of the case has plenty of room to mount your 240mm radiator and the mesh top allows for lots of fresh air to cool your CPU.

Question 3

The overview says it comes with a 200mm fan, but the specifications say 120mm. Which is correct?

Accepted Answer

They're both correct, there is a 200 mm fan in the front to intake cool air, whilst there is a 120mm in the rear to exhaust hot air

Question 4

What is the size of the pre-installed PSU?

Accepted Answer

It does not have one

Question 5

Will a H105 in push/pull fit in the top?

Accepted Answer

I would say no because I have a gtx 770 graphics card and theres barely enough space, the cables from the gpu actually press against the radiator fins.

Question 6

Can anyone suggest an 850 watt PSU that will fit the case?

Accepted Answer

I don't know any particular 850w PSU for this case, but I can tell you anything over 160mm long probably wouldn't fit. As I had a 160mm PSU that had a very snug fit. Personally I'd go with a 150mm long modular PSU.

Question 7

Can this case fit the ASUS Z97-Pro Wi-Fi LGA 1150 ATX Intel Motherboard?

Accepted Answer

This case only fits MATX and ITX motherboards.

Question 8

Good day is this product available in black ?

Accepted Answer

The Xigmatek Aquila Micro-ATX case isn't available in black yet, the black edition seems to be releasing later, but as of right now it's only the white edition available for purchase.

Question 9

is there a reset button, cause on the pictures i cannot find one?

Accepted Answer

There is no reset button on the case itself, but if you have a pretty recent motherboard, like for example, most of the z77 chipset Intel motherboards that have come out in 2013, the motherboards themselves have power-on and reset buttons, though I don't believe it to be practical to have to open up a side panel just to reset your computer. Hope this helps!

Question 10

Can you buy the clear side panels separately?  I wanted to buy two but can't find them anywhere.

Accepted Answer

I had no luck with that either. I sent an email to the company asking if panels could be purchased separately, however I didn't receive a response.

Product Name	Aquila
Dimensions (L x H x W)	15.3 x 15.8 x 10.4 in. (390 x 403 x 265mm)
Drive Bays	5.25" External x 1 (tool-free retainers) 3.5" / 2.5" Internal x 2 (tool-free retainers) 2.5" Internal x 2 (tool-free retainers)
Expansion Slots	4 Slots, tool-free PCI slot covers (330mm support)
Motherboard Support	Micro ATX Mini-ITX
Power Supply	Standard PS/2 ATX or EPS
Cooling System	Front Fan: 120mm or 140mm or 200mm fans optional Rear Fan: One 120mm / 140mm fan Pre-installed one 120mm silent Xigmatek XOF white fan Top Fan: Two 120 / 140mm fans optional
I/O Panel	USB 3.0 x 2, HD Audio in/out jacks
Max. Graphic Card Length	330mm

Brand	Xigmatek
Series	Aquila
Model	CCD-14AWW-U01

Type	Mini-ITX Tower
Color	White
Case Material	Steel / Plastic
With Power Supply	No
Motherboard Compatibility	Micro ATX / Mini-ITX
Dust Filters	Yes

External 5.25" Drive Bays	5.25" External x 1 (tool-free retainers)
Internal 3.5" Drive Bays	3.5"/2.5" Internal x 2 (tool-free retainers)
Internal 2.5" Drive Bays	2.5" Internal x 2(tool-free retainers)
Expansion Slots	4 slots, tool free PCI slot covers (330mm support)

120mm Fans	Front Fan: 120mm or 140mm or 200mm fans optional Rear Fan: One 120mm/140mm fan Preinstalled one 120mm silent Xigmatek XOF white fan Top Fan: Two 120/140mm fans optional
140mm Fans	Front Fan: 120mm or 140mm or 200mm fans optional Rear Fan: One 120mm/140mm fan Top Fan: Two 120/140mm fans optional
200mm Fans	Front Fan: 120mm or 140mm or 200mm fans optional

Xigmatek Aquila White Steel Micro-ATX Cube Chassis CCD-14AWW-U01

Xigmatek Aquila Mini-ITX Tower Computer Case

Features

Specifications

Gallery

Learn more about the XIGMATEK CCD-14AWW-U01

Customer Reviews of the XIGMATEK CCD-14AWW-U01

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16811815041