Pros: The color is vivid and is the correct color red.

Cons: For reference, this is a new build, new case, all clean surfaces.

I got the product with half of the LEDs dead on arrival.

As a result of it being packed in a folded over fashion, the strip has issues lying flat, even when using the adhesive strip. The adhesive failed within 24 hours. I think the folded over nature also is to blame for the dead LEDS. The next issue I had was the MASSIVE MOLEX connection wire. The pass through wasnt really needed as this seems to be the only product in my case that actually still used a MOLEX connection. I did compromise with the wire when I bought this purchase as the 12 inch strip seemed to fit what I needed to be done. What it doesnt show you is the shortness of this connection. forget cable management with this as hiding the blindingly white MOLEX connectors difficult when combined with a short connection wire.

Other Thoughts: Final thoughts,
MOLEX is a horrible application for this product. Micro USB to USB connection would have been preferred, with the ability to daisy chain them. Silverstone needs to seriously reconsider packing this item in a way so the product isnt stressed to its fullest by being folded over on itself.

I am very disappointed.

Pros: Works as advised !
One molex thats it!
lights my case up

Cons: none.

Pros: works well, very flexible, bright enough for a mid tower.

Cons: none so far

Pros: Nice red hue.
Strong adhesive.
Bright solid coloring.

Cons: They didn't come with a daisy chain connection.

Other Thoughts: So yes I would recommend this product, to other people. However if you plan on daisy chaining them it would be wise to order male to male connectors. These are great I got about 5 of them but have no way to put more then one in my case right now. so for not having the male to male 4 pin I will still give it a 5. These are nice strips.

Pros: Very bright red
Does exactly what it's advertised to do

Cons: It has some very slight issues:
The adhesive stuck for less than 24 hours, so I recommend getting some zip ties.

When I initially plugged in the molex and started it up I got nothing. I found after looking that it can be plugged into either side of the strip, so I plugged it into the other side, then it worked.

Other Thoughts: Because it's so bright, I suggest putting these LEDs in a spot that won't hit your eye when looking directly at the case; unless of course you want to give yourself a headache.

Pros: Bright, easy to install. Nice dark red not pink.

Cons: Lights run very hot. Adhesive does not hold at all.

Other Thoughts: Over all not a bad product at all. Easy to install and fit in even the smallest of cases. (corsair 250d in my case) Would need 1-2 more strips for a full sized case.

Pros: Beautiful dark red. Very bright! Lights up my case beautifully.

Cons: Maybe need to purchase 4 pin extension for clean setup and no wires hanging around to be seen from case window.

Pros: This is a fantastic led, it glows blood red which is perfect. The light fills up about 75% of my case. Disclaimer: I have a full sized case, it is the CM storm trooper, so it is a really big case. the led will fill any mid-size case and most full size cases.

Cons: Nothing at all.

Pros: Plug and play (Molex), and if you so desire, you can daisy chain multiple light strips together. The 3m tape is decent and has survived multiple sticks and unsticks without failing

Cons: Extremely bright, be aware of color wash inside the case. For example Blue LED's will look purple/violet, etc.

Other Thoughts: These are my go-to case lighting strips.

Pros: Loving this product. It has lit up the internals of my RVZ01 nicely. The double sided sticky tape survived more than one adhesion after I realized that the initial place I put it would not work. I gently removed it from it's current location and put it in a new one.

Cons: The 4pin connector is difficult to attach as the end of the LED strip is not stiff. This makes it difficult to attach after the strip is already attached.