NZXT CB-LED10-BU Sleeved LED Kit - Blue, 1 m

Pros: Extremely easy to install. Mounting hardware sticks well and easy to slide cable in and out of.
Inexpensive.
1m was the perfect length for my mid tower (Antec Three Hundred) and the blue matches the stock fan LED colours in the chassis and very bright.

Cons: None so far.

Other Thoughts: Antec Three Hundred Illusion Black Steel ATX Mid Tower
Gigabyte 990FXA-UD7
AMD FX-8350 8-core 4.0 GHz
Nvidia GeForce GTX 560 Ti
4x4GB DDR3 1600 MHz G.SKILL RipJaws
2x Kingston 128GB SSD
1x Seagate 2TB 7200 RPM HDD
CORSAIR HX850 Modular PSU

Pros: these look great in your case. the black sleeving gives it that sleek look and blends in nicely in the case. i mounted these in the most descrete way i could

Cons: none

Pros: Overall high quality.

Cons: The lights are extremely directional. Each light has a beam 10cm wide when shooting across the width of the case, about 14cm. If components are closer to the light you get small bright spots on them. Maybe not the option if you want "glow" in your case.

Other Thoughts: In my NZXT case, the blue is a little more cobalt blue color than the stock fan LEDs, OK, but it's always hard to get exact matches. I took out my NZXT's main black mesh metal piece so that enough light shows through.

Pros: These LED lights are great, I have them in my Phantom 410, I have them around the side panel window and they look great, I never shut them off or adjust the brightness. They're always on and always at full brightness. They're beautiful inside of the computer and adds character to the computer. I wanna buy more of them!

Cons: Not enough on the strip!!!I wish there were more.

Other Thoughts: I want more of them

Pros: -Seems like a great set of lights if they work.
-Has 3 levels of brightness
-Comes with sticky pads to align them around your case

Cons: Unfortunately mine came in the mail faulty, only about half of them worked, later on by accident they all turned on because there was a loop in the set, seems they will all only work if one part is looped, if I try to stretch the set around my case they will not all work unfortunately.

Other Thoughts: I would have returned these had I not been stupid enough to trust that I got working lights and threw away the packaging so I was not able to return these and get a new set. For now I deal with it, but definitely need to buy a new set. Luckily they aren't too expensive. Only 2 eggs for the half working lights.

Manufacturer Response:

I just wanted to thank you for being a customer of NZXT.

I also wanted to apologize about the issue with the Sleeved LED10-BU, please visit our support center at www.nzxt.com/support open and create a ticket with us.

Once again, thank you for taking the time to let us know how you feel. We appreciate your business and truly want to make your experience as enjoyable as possible.

Best regards,

NZXT Support

Pros: Blue, 1 meter was perfect for my micro atx case, lights up all my components. Very easy to install i didnt even bother to look at the instructions (who does?) And the black pvb and black SLEEVED cables blend in nicely and i cant even see them in my case after the side panel is on.

Cons: Nothing, does what its supposed to.

Other Thoughts: I had to route another molex cable just to plug this in because the one i was planning on using didnt reach by about an inch!

Pros: The lighting looks nice, and has brightness settings. Clips to hold to case hold well

Cons: The lights where shorting out when installed on in the pci slot. I had to unscrew the pci bracket from the circuit board and put a piece of electrical tape on the bracket before re-attaching the circuit board. didn't take long so I only dropped 1 egg

Other Thoughts: I think the short-circuiting problem was just a manufacturing defect because I could not see anything that would carry a charge to the bracket and ground the circuit with my computer case

Pros: beautiful blue led lights, high quality components, nice black sleeve, the fact that it fits in a PCI slot and controllable from outside of the computer case is a nice feature... as a note, it doesn't actually USE a PCI slot on your motherboard, it just uses an opening in your case (it will work if you have a tiny case with all your PCI slots taken up, you would have to leave the controller someone else inside the case, you just would have to leave it on your favorite setting)

Cons: MINOR CONS: even though it has 3 brightness settings, which are very nice in general, i would have liked to see the lowest setting get dimmer than it is. also, in the next model, maybe more settings, a 'chase' pattern, a 'slow pulse' patters, some other lighting options, might as well, the parts are all there, just gotta program it.

Other Thoughts: worth the money, a well-made, quality item. add's value and class to your case.

Pros: *Bright
*Easy to Install
*Brightness Adjuster
*Sleeved LED's
*LONG!
*Good Sticky stuff

Cons: They are absolutely amazing, however, if your back fan on your case uses Molex, as well as lets say 2 front fans, and a top mounted fan, then would need to get an adapter. Thankfully, I on't have this problem.

Other Thoughts: It is really bright and lights up my case very well. It does all that I need it to do, and more! As I said, it is bright, but it is not to the point where it is blinding to look at when gaming at night. I think this is an AMAZING product, and it goes extremely well with my NZXT Tempest 410 Elite I bought from Newegg

Pros: Looks great

Cons: No longer produced