NZXT CB-LED20-RD Sleeved LED Kit - Red, 2 m

Pros: This case is huge! Not only that but it came with everything that I needed, and a lot of extra stuff I didn't use. That just means as I upgrade this rig I'll have screws and whatnot to do it with without buying new stuff. It came with enough fans to keep it cooled and they were already hooked up to a fan controller. I will recommend this case to anyone and will buy another if I'm building another gaming rig.

Cons: The only con that I have is I thought I was rough handling it and thought I was going to break it. However It seems pretty sturdy.

Other Thoughts: This is a beast of a case standing 2ft tall.

Pros: The sleeving is good quality and blends right in with the black of my case so you can't see it any of the sleeving, only the lights :D The PCI slot is painted black so it also looks great with a black case (hate the cheap looking silver). You have an off/on button, and 3 different choices of brightness (not much a difference between each mode)

Cons: There is a HUGE ciruit board attached to the PCI slot that you connect the molex power adapter into, along with the LED strip connector. I couldn't use this kit at all because of how big this circuit board is. It hits my voltage regulators on the left side of the mobo by the PCI slots, and the other slots are restricted by my GPU's in SLI. I have tried literally every spot on the 800d and couldn't find one that would work while keeping the cable hidden.

Other Thoughts: If you have tons of PCI slots in the back you can prolly find a slot that will work, but if you have about 8 or less (which is typical) you might find it hard to install. I could have put this at the way top, but I would have had to string the wire across the entire system; I like a clean build not one looking sloppy.

Pros: Easy Install
Came with stick on clippers
Not insanely bright

Cons: Takes up a PCI slot
Lights are directional and not that strong

Other Thoughts: I think you could get the same yet better effects with some cathodes for cheaper. The sleeve started at the middle of my case and didn't reach from where I started but my thor v2 is a big case. I'm rather disappointed that the lights don't come out when i retract my cases top "fins". Maybe I'll throw a cathode in there for that effect.

Pros: Looks good. Nice dark red color.

Cons: Mine has a problem with the brightness setting. Will only go to 2 of the settings and not 3.

Other Thoughts: Maybe you will get lucky and not have this issue.

Pros: nice wire sleve . looks great. great ad on.

Cons: not as flexible as i would like , but at least its sturdy i suppose .

Other Thoughts: wished it had some type of plug in for a master switch on and off then i could run it to my other led on/off switches, to be at my finger tips , but instead i have to reach way down and back to turn it off, at least the switch is bigger than most on the slot though . or its have the option to buy an ad-on switch for this or something .

Pros: - Slim cable sleeve
- Mounts and number of them
- Controls

Cons: - Not so bright LED's
- Cable could be a bit longer
- PCI switch hub build

Other Thoughts: This LED strip really looked like some cheesy Christmas lights you can get at WalMart. The cable will arely cover a side of a case. The PCI hubs board was all the way toward the motehrboard (if you'll notice in the pictures) and it hits my motherboard yet making it unmountable to its respective slot. It just sits at the bottom of my 5.25 slots. The power connection (PC side) is very cheaply made, and barely transfers the connection. Worse of all, the lights are kind of dark. The few lights the case came with was 5x brighter atleast.

Pros: looked nice

Cons: after 6 months of normal use I noticed one led had gone out. I disconnected everything and plugged it back in and nothing. 3 weeks down the line they don't work anymore.

Other Thoughts: it was kinda of a waste....for 8 months (and not 24/7 use)or about 1 dollar per week.....

Manufacturer Response:

First of all, We want to thank you for being a customer of NZXT.

Please submit a service ticket at our support center http://www.nzxt.com/support or contact us directly at 626.228.1150 to get your replacement LED Cables, just a reminder that all NZXT Accessories come with 2 years warranty. ^^
We appreciate your feedback and will continue to strive to make our products better.

Once again, thank you for taking the time to let us know how you feel. We appreciate your business and truly want to make your experience as enjoyable as possible.

Pros: None

Cons: This didnt work...I installed it and it worked for maybe 5 minutes then went out...A waste of $20. Save your money.

Manufacturer Response:

First of all, We want to thank you for being a customer of NZXT.

We want to apologize for the defective LED Kit you purchase. Please submit a service ticket at our support center http://www.nzxt.com/support or contact us directly at 626.228.1150 to have it replace at no cost. We appreciate your feedback and will continue to strive to make our products better.

Once again, thank you for taking the time to let us know how you feel. We appreciate your business and truly want to make your experience as enjoyable as possible.

Pros: -Nice bendable wiring
-Comes with Mounts
-2m = 6ft
-Dimmer

Cons: -LEDs are directional
-Mounting is ok
-Takes a rear expansion bay
-Could be a bit brighter
-Dimmer

Other Thoughts: Package was pretty busted up and bent. Surprised the PCB didn't break or get damaged. Opened it up and popped them in my HAF X and it had just enough to make a full lap around the inner edge of the case. Lights could be a bit brighter and they seems to shine in a certain direction as them almost emit a beam, so you must make sure the lights are facing the correct direction when mounting the wiring. This dimmer is a joke, the 3 options offer little change in lumens. On the bright side, after re-situating it 3 times due to them... beams I guess, that the LEDs emit, the case and lighting looks good. I suppose it was worth it.

Manufacturer Response:

We want to thank you for being a customer of NZXT and we appreciate you taking the time to send your feedback and will continue to strive to make our products better.

Pros: Looked like it would work.. Till..

Cons: Came dead. Plugged it in, did not work. Took a closer look and the red wire that came connected to the molex connecter for its power was damaged and not properly seated onto the molex pin itself, it was loose and out there. DOA.

Other Thoughts: I have never had this problem with OCZ before, i would always trust this brand but now this has made me a little skeptical about how they really do put together their merchandise.