Pros: Brightest setting creates a nice ambient color in the case.

Black sleeve for the wires.

Plastic clips are good.

Basically plug and play.

Cons: The 3M sticky pads on the clips are worthless and low quality. Be ready to replace it.

If you run a pair of big chunky video cards you may not have an expansion slot to mount the controller to. However it also does not need to be plugged to the main board.

Had to cover up the LED closest to the chip with electrical tape. It could be seen directly when looking in the case window from almost any angle and ruined the ambient lighting effect.

Other Thoughts: Try to keep the LED bubbles hidden from plain sight to create ambient light. They look really bad if you can see them directly.

Pros: Easy installation
Easy to plug
Easy adjust

Cons: Doesnt light much
only a light every 3 inches...
Not very long for the price...

Pros: -bright LEDs
-look cool
-able to turn off
-able to dim

Cons: -some may say that they are too bright. this is a good thing if you ask me, though

Pros: 2M length gives plenty of room to light up even the largest cases.
good quality sleeving
multiple lighting settings
No multi colored wires

Cons: Had one dead LED, but that could have been caused my a number of factors.

Other Thoughts: The adhesive on the little clips that you use to mount it is 3M double sided tape, but its the foam removable kind... so it doesn't adhere as well as I would like it to. But that can be easily remedied with better tape.
Fit perfect in my NZXT H440, in fact it went all the way around the case and then I used another foot of it as under-case lighting.

Pros: They work really well and illuminate my case very nicely. The length and amount of brightness was exactly what I was looking for in a LED strip.

Cons: This strip I bought has died after just 31 days of use and will no longer function. I was expecting more out of them, maybe NZXT's quality is just going down and I should look other competitors products.

Other Thoughts: I would recommend them if they lasted longer, as they were perfect for me.

Manufacturer Response:

Hello, Valued NZXT Customer

We do apologize and appreciate the feedback on our Sleeved LED kit , what we can say is that if the LED lights did burn out we can issue an RMA replacement no problem. All we would need you to do is proceed to support.nzxt.com and submit a request. At which our support reps would be able to assist you with an RMA replacement. If you have any questions or concerns please feel free to contact us at +1-800-228-9395.

Kind regards,
NZXT Support

Pros: I've had these going for a couple years now, here's my thoughts:

- decent amount of light
- excellent length, really lets you get these around your case
- really quality sleeving that disappears in your build
- PCI slot controller is great, thanks NZXT!

Cons: - as with most LED setups, adhesive is the problem. Replaced the stock stuff with the higher strength 3M double sided

Other Thoughts: Plan out your placement carefully, it stays better with some planning and better double sided tape, but nothing stays forever, unfortunately. If you have spots you can mount the LEDs without the little included clasps, and just mount them to your case itself, that would be optimal.

Pros: Great, was real easy to install! Very long, fits around NZXT Phanom 410. Bright lights with brightness setting. Have had them for months now, always on when I turn pc on, they still run great and not one problem. Plugs in by 4 pin molex. Entry and exit pins on either side. 10/10 would buy again.

Cons: Does take up space to one slot in the back, perfectly fine though, very small and easy to use.

Pros: It's bright enough for my taste. I have it installed in my CM Storm Trooper. I have one inside my window and side vent and it serves its purpose as a red lighting theme since my case fans in the front are red. Installation is simple and I haven't seen any clips lose the stickiness from the 3M yet. (knock on wood).

Cons: N/A

Pros: - Simple to install.
- Good length.
- The clips worked correctly.
- Fair price (if they worked).

Cons: - The lights did not work out of the box.
- The circuit board and its connectors were flimsy.
- The clips were black, but the adhesive was white.

Other Thoughts: Bought this LED strip a few months ago, unfortunately for me did not get to install them until this past weekend. Now that the product is well outside of its return policy, I find that the lights do not work right out of the box. I am not sure if it is the switch circuit board or the lights themselves that do not work. All I know is that the lights are installed correctly and that they are either defective or harder to see than your iPhone in the sun, with the brightness turned all the way down. Most likely the former.

Anyways, this is aggravating because it is a relatively cheap product at $10, meaning it is not worth the hassle of going through returning/replacing it since I am outside the return policy. Therefore, I am either forced with the decision to buy another one (my loss) or to spite the company and not buy another one (my loss). Overall a disappointment.

Manufacturer Response:

Hello, Valued NZXT Customer

We do apologize for the DOA unit of the LED Sleeved kit we can assist you with a RMA. How you can do this is visiting support.nzxt.com and submitting a request at the top right, Also you can contact us directly at +1-800-228-9395. We deeply apologize again and appreciate the feedback on our products .

Kind regards,
NZXT Support.

Pros: Easy to install!

Cons: Not very bright at all! I have an all black interior and I turned off all the lights, turned the system on and i could barely tell it was on. I have the sufficient power to power them. my two $3 strips from somewhere else are at least 3-4 times brighter.

Manufacturer Response:

Hello, Valued NZXT Customer

We appreciate the feedback on our LED Sleeved kit, if it is not emitting enough light we would recommend having that kit replaced. How you can do this is visiting support.nzxt.com and submitting a request at the top right. Also you can contact us directly at +1-800-228-9395.

Kind regards,
NZXT Support.