NZXT CB-LED20-GR Sleeved LED Kit - Green, 2 m

Pros: Well for starters the green is an awesome shade and is nice and bright with on/off switch and 3 brightness settings. The tube of LEDs is long, thin and flexible.

Hooks to place the tube just about anywhere.

Cons: The LEDs are only on one side of the cable.

Other Thoughts: Wish it wasn't discontinued. They need to support more colours and even multicolored ones.

Pros: Lights up nice
Flexible

Cons: If any part touches metal it shorts out! I have it covered in electrical tape now so it will work...

Pros: Looks great
Lights up my case effectively

Cons: Molex connector caught on fire the first time it was powered on.

Other Thoughts: It turns out that the connector only had two out of the four pins. While the fact that I ignored this and tried to power on anyway does put me at fault, it came broken anyway, fire or not. I bought a blue set at the same time and was able to use that Molex connector to get this set to work, so it's not all bad.

Pros: Needs an open expansion slot but not a PCI/PCIe slot

Powered by the useless molex connectors so you'll def be able to power it.

On and off switch for those times you need your PC on over night.

Cons: The 3 brightness settings are not all that different.

The wiring of this thing can be a huge pain if you do not have a large case.

Other Thoughts: Took of an egg just because it didn't come with many hooks for wiring the sleeved LEDs. Other than that it really is the best way to light up a case.

Pros: fills my case with a nice green glow

Cons: as others have stated, wouldve been nice if the leds didnt start basically immediately at the card. but its not that big of a deal.

Pros: quality braided sleeved LED kit.

Cons: No cons.

Other Thoughts: could have been sound active mode as well idk?>

Pros: Super nice, saturated green LEDs. This is a fantastic idea for computer lighting.
Plenty of little clips to hold it in place wherever you want it. I had enough left over to route other cables in my PC.

Cons: The power plug was put together a bit on the shoddy side. I had to use a pair of pliers to force the negative lead back into correct position. Before that the lights were flickering.

Other Thoughts: The three-setting switch is a nice addition.

Pros: A fantastic way to light a case! The flexible sleeved wire is thin but sturdy and can go just about anywhere. The lights are quite bright as well. Also, the switch on the back is mounted in your case's PCI bracket and looks quite stylish; it has a matte black finish. The green color perfectly complements a green LED case fan, and is quite saturated. Overall, this is a gorgeous product for anyone with a clear or wire mesh case.

Installation is a snap. Included in the package are a number of clips with an adhesive side. They can be mounted anywhere (obviously heatsinks or bare electrical/electronic components should be avoided), and are quite discreet. The cabling easily attaches to this clips, offering a reasonably secure method of keeping all the LEDs where you want them. Included are several small and a few large clips, allowing for considerable flexibility.

Cons: There are three basic issues I had with this product, two of which are minor but the third is rather annoying. The three minor issues are as follows: firstly, the circuit board on the PCI bracket is mounted in such a way as to make putting the switch in a spot where an empty PCI slot on your motherboard exists quite impossible. Hopefully, there is at least one slot in your case that has no corresponding PCI slot on your mobo. Secondly, the molex adapter is cheaply made, resulting in pins being pushed out when I first plugged it in. This is not as bad an issue as it sounds, however. The biggest issue with this item is that the brightness switch is very, very finicky. Often is simply turns the lights off instead of dimming them. Simply flicking the switch a few times usually fixes this issue, fortunately.

Other Thoughts: I recommend this product, and hope that future revisions of this product fix the above issues.

At any rate, this is a great, fun way to light a case.