Pros: Works for older computer that still used old connectors.

Cons: none

Pros: ANY time you go through a "powered converter" you are NOT getting an "extension cord", you are getting something that was primarily made to physically fit within the architecture. Most ALL converters will slow drive seek-time, etc. That's the price you pay. There are some tweaks you can try like setting up a larger page-file, etc. But it's not an extension cord.....not when IT has to process a signal.

Cons: The architecture is VERY open: check your rings and watches before putting your mits inside. The other issue is that if you look at the design it raised from the motherboard; it's easy to harm it IF you have heavy cables or there things that may bump it. It does work fine however.

Pros: I wanted to keep alive a legacy desktop Shuttle running XP. Since this motherboard only supported IDE I could not directly swap into a SATA HD. With this converter I was able to boot to my clone of the original IDE boot system partition.

Cons: None.

Pros: None.

Cons: Not sure if the product is defective, or if my Dell Optiplex GX260 PC BIOS simply won't recognize the adapter. Only gives a single connection to a drive.

Other Thoughts: Even though this device did not work for me, it may work in another PC as evidenced by other reviews. This device plugs into the motherboard IDE connector, and has only one connector for a single SATA drive. I purchased a BYTE** IDE to SATA adapter, works well, that plugs directly into a SATA CD/DVD drive, so the motherboard will support both IDE devices on the parallel cable.

Pros: Saw some less than stellar reviews on this product. This is because several buyers were confused regarding proper use the product. Short answer: This product plugs into the IDE port of a MOTHERBOARD and NOT the IDE port of a hard drive. I had this working perfectly in 5 minutes with a 2TB SATA drive.

Cons: Nothing worth writing here

Other Thoughts: Great to bring new life to older motherboards by being able to connect SATA drives. Part of the confusion about this product may be because of an incomplete manufacturer description. Again..... a great way to extend the life of older motherboards.

Pros: I bought this to use my old hard IDE drive, when it arrived everything seem to be working, except for one thing, i bought the wrong part. Darn it!

Cons: Seems to work, although there not way to tell for sure, as i haven't been able to get it up and running. Its my fault really, i bought the wrong part.

Pros: Item works 100% Installed on a ABIT NF 7 Ver 2.0 MOB Win 7 OS Western Digital SATA 500 Gig Reports as a UDMA 6 .......Big improvement over ATA 100 ide drive.....(5) Eggs !!!!!

Cons: Free Shipping a bit slow aprox 9 days.

Pros: N/A

Cons: N/A

Other Thoughts: Contacted the manufacturer of the SATA optical drive I was trying to my motherboard and they recommended using a PATA SATA adapter board that clips on to the back of the device. Contacted Newegg and they refunded my money in about 3 minutes. So, the customer service score is Vantec zero, New Egg seven (by a touchdown.) To reiterate, the Vantec technician could not understand the power connection problem and was not even sure I had a Vantec product (I had to describe it's color before he was sure it was theirs.)
***In summary*** - if you require a way to connect a SATA device to an IDE device and you already have a means of powering the SATA device independent of the adapter, then this product is ok.

Pros: I cannot rate the positives, because the device cannot be connected without cables which are not included in the original package.

Cons: What you receive is an adapter board with an IDE connection on one side and an SATA Data connection beside a 4 pin power connection on the other side. In my case, I intended to connect a new SATA optical drive to an IDE connection on an older motherboard which had an insufficient number of SATA connections.
The adapter package supplied by Vantec allows me to connect the adapter to the motherboard, and the SATA Data on the adapter to the SATA Data on the optical drive, ***but *** then there is no way to power optical drive without a SATA to 4 pin power cable.

Other Thoughts: If you purchase this adapter, be sure you have a way to power your SATA drive. In my opinion, it is not accurate to describe this product as offering "SATA to IDE" as "converted" if the device's power has also not been converted.

When I called Vantec's customer support the person was not only unable to help me, he was unsure if I had in fact purchased one of their products because of a slight difference in the product code.

I would have rated the product as one egg, but I cannot actually say that it doesn't work as it has yet to be connected...If you have the means to power your SATA device via a 4 pin connection then perhaps this is the right product for you.

Pros: This product works better as a IDE to Sata device. NOT a sata to ide... For Sata to IDE - you should get their two port unit; or the "StarTech IDE2SAT IDE" which converts a sata unit to an ide output...

The manufacturers are getting really loose with their descriptions... Anyway - the Vantec cb-sp100 works fine as a IDE to Sata unit. For example - I have a sata hd duplicator. (ByTecc). Needed to copy my wife's ide drive... Bought a sp100 - carefully cut off the side plastic of the connector; slightly bent up the molly power unit - and Voila! One Sata HD duplicator - which also now copies ide drives....

Cons: Too expensive for what you get. You can purchase the vantec cb-is100 and get a plastic encased unit... (But has the correct descript for what its doing...) They're all being made in china, with various companies brand names... and terrible descripts of the purpose of device.

Other Thoughts: This unit does work great as a ide to Sata. As a test - I took an ide drive; ran it thru this (convert to sata) then ran it thru a sata to usb converter - and everything worked just fine... But I purchased it to help make dup's of HD's without spending a ton...