Skip to: | | - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.

If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message. - Computer Parts, Laptops, Electronics, HDTVs, Digital Cameras and More!

PremierTry Message.
Home > 
Components > 
Motherboards > 
Server Motherboards > 
SuperMicro > 
Item#: N82E16813182819

SUPERMICRO MBD-X10SLL-F-O uATX Server Motherboard LGA 1150 DDR3 1600

  • LGA 1150
  • C222 Intel C222
  • 4 x 240pin

ICON Loading...
  • Overview
  • Specifications
  • Warranty & Returns
  • Reviews

SUPERMICRO MBD-X10SLL-F-O uATX Server Motherboard


  • Single socket H3 (LGA 1150) supports Intel® Xeon® E3-1200 v3/v4, 4th gen. Core i3, Pentium, Celeron processors
  • Intel® C222 Express PCH
  • Up to 32GB DDR3 ECC 1600MHz UDIMMs in 4 sockets
  • Dual Gigabit Ethernet LAN ports (1x Intel® i217LM & 1x Intel® i210AT)
  • 2x SATA (6Gbps), 4x SATA (3Gbps)
  • 1x PCI-E 3.0 x8 (in x16), 1x PCI-E 3.0 x8, and 1x PCI-E 2.0 x4 (in x8) slots
  • 2x USB 3.0 (1 Type-A + 1 via header) 6x USB 2.0 (4 rear + 2 via header)
  • Integrated IPMI 2.0 with KVM and Dedicated LAN
  • SATA DOM power connector support
  • VGA D-sub connector, TPM header


Product SKUs
MBD-X10SLL-F X10SLL-F (Bulk Pack)
Physical Stats
Form Factor microATX
Dimensions 9.6" x 9.6", (24.4cm x 24.4 cm)
  • Intel® Xeon® processor E3-1200 v3/v4 and 4th Gen Core i3, Pentium, Celeron processors
  • Single Socket H3 (LGA 1150)
System Memory
Memory Capacity
  • 4x 240-pin DDR3 DIMM sockets
  • Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 8GB, 4GB, 2GB, 1GB
Memory Voltage 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset Intel® C222 Express PCH
  • SATA3 (6Gbps) w/ RAID 0, 1
  • SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Aspeed AST2400 with 10/100/1000M bps MAC
Network Controllers
  • Intel® i217LM + Intel® i210AT Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8211E PHY (dedicated IPMI)
VGA BMC integrated Aspeed AST2400
Input / Output
Serial ATA
  • 2x SATA3 (6Gbps) ports
  • 4x SATA2 (3Gbps) ports
  • 2x Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
  • 2x USB 3.0 ports (1 Type-A, 1 via header)
  • 6x USB 2.0 ports (4 rear, 2 via header)
VGA 1x VGA D-Sub Connector
Serial Port / Header 2x COM ports (1 rear, 1 header)
DOM SATA DOM (Disk on Module) power connector support
TPM 1x TPM 1.2 20-pin Header



Whats in the Box


Learn more about the SuperMicro MBD-X10SLL-F-O

Warranty, Returns, And Additional Information
  • Warranty
  • Limited Warranty period (parts): 1 year
  • Limited Warranty period (labor): 3 years
  • Read full details

Customer Reviews of the SuperMicro MBD-X10SLL-F-O

Do you own this product? Write a Review

ICON Loading...

Filter Results

  • Michael D.
  • 5/1/2016 10:34:47 AM
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsExcellent Freenas Board

Pros: Freenas forums were not incorrect. This board has superior compatibility for VMs .. I had many esoteric operating systems running in no time and had no driver issues. It also came packaged with a signed checklist verifying the contents of the box. A+ Supermicro!

Cons: None really.. many people complain about the IPMI and BIOS needing a license key to update them. This is incorrect. If you go to the website you can download all available drivers and update them through the IPMI View software they provide. Same with the BIOS .. you just have to manually flash using a USB the "older" way. Luckily I bought this board in 2016 and it already had the latest firmware installed on it which was nice!

Did you find this review helpful? Yes No

  • Kasey K.
  • 4/25/2016 6:34:57 PM
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsOne of the best boards for a NAS

Pros: - Well packaged. Included documentation covered pretty much everything you need to get it up and running.
- On board USB 3.0 port (for booting from a dedicated flash drive; useful for FreeNAS).
- Been running nearly 24/7 for the last four months or so, without so much as even a minor glitch.

Cons: - My only complaint is that I wish some of the POST codes were better documented (see "Other"). TL;DR: RAM order is important to this board.

Other Thoughts: I put the whole server together (I was actually demonstrating to a friend how to build a PC from scratch) in one night. I got it all together, powered it up, and it hung in BIOS at a POST code that wasn't documented (by Supermicro). Just my luck...

Turns out the RAM slots are paired by bank (which are two different color slots, confusing me more) instead of by channel, and if using only two sticks, the RAM needs to be in the top two slots in order to POST (all this is explicitly stated in the manual that I ignored because I thought I knew better). After that, FreeNAS installed quickly and picked up my existing array that was plugged into the on-board SATA controller(s).

FreeNAS Server Build:
Intel Core i3-4170
Crucial 16GB DDR3-1600 ECC CT2KIT102472BD160B
WD Green 1TB (x2)
Seagate Barracuda Green 1.5TB (x2)
WD Red 3TB (x2)
4-Port Marvell 88SE9235-based PCIe x2 SATA-III Card
Fractal Design Node 804
Corsair CX430M PSU
Corsair H60 (the original version) (yes, I watercooled my server, I had it laying around; yes, it says right in the manual to only use the stock cooler; yes, it runs fine, granted with plenty of airflow)
ADATA 16GB USB 3.0 Boot Drive

Manufacturer Response:

Thank you for your comment! Supermicro needs your comment to improve our quality and service. The Post Codes User's Guide link is as below. If you still have any question, feel free to contact us. Please see the below technical support contact information:

Phone: (408)503-8000
Hours: 9:00 a.m – 6:00 p.m. Pacific Time (Monday – Friday)

Email address:

You can also submit your issue online:

Please do not hesitate to contact us if you have any question.

Thank you!
SM Technical Support

Did you find this review helpful? Yes No

  • Siavash N.
  • 12/2/2015 8:07:31 AM
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsAmazing Board

Pros: This is just an absolute perfect server board. It does not have all the fancy bells and whistles that more expensive server boards have but it gets the job done.
The onboard IPMI LAN is a great feature to use.

Easy to setup. Took me less than 5 minutes to install the board and parts and get it past POST to install the Operating System.

I have been running the board for 6 months now 24/7 and have not have a single issue. The server RAM for it is also great(Can't go wrong with Kingston) but that is for another review.

This board is great. Simple as that

SuperMicro RULES!!!

Cons: None

1 out of 1 people found this review helpful. Did you? Yes No

5 out of 5 eggsSolid motherboard with good remote access

Pros: I'm using this board for a headless home server, and the IPMI capabilities are awesome: I was able to install FreeBSD over the network without needing a USB drive or monitor.

The board is still running after about a year, and I'm happy with the speeds of the network interfaces and the hard drive connections. I'm using with with an i3, and the ECC RAM appears to work (though it's surprisingly hard to confirm this). The board seems to be solidly constructed.

Cons: The documentation is a bit unclear. There's a separate manual available from Supermicro that explains the IPMI system, but I still needed a lot of trial and error to get it working.

There are two ways to access the IPMI subsystem: client software from Supermicro and a web interface. Unfortunately, the client software didn't work when I tried to boot from an ISO, and the web interface is a bit clunky. After a number of hours of trial and error, I managed to use the web interface to specify an ISO to boot from, and I use the client software for everything else.

Other Thoughts: At first, FreeBSD intermittently refused to recognize keystrokes through the client software after a reboot, but that problem seems to have disappeared. I tried to figure out this problem, but there wasn't much information available on how IPMI talks to the OS.

I'm new to this area, and I'm not sure how high to set my expectations. Rating it 5 because it does everything that I need, though beware that it's not a seamless experience.

Did you find this review helpful? Yes No

  • Ryan H.
  • 4/25/2015 12:36:51 PM
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsQuality Board, probably over my head

Pros: I ordered this for a home NAS build 2 months ago and it was amazing. I've never dealt with a server board before, so this was definitely a learning experience. This outperforms all my expectations. I didn't notice any difference going from dual to triple LAN, but I did notice a huge difference in going from my old NAS' 1x100Mb/s connection to 2x1000Mb/s connections. I can transfer files at incredible speeds all while streaming movies to my PC and BluRay player. I thought it was weird that there was a USB3.0 slot sticking straight out of the motherboard, but then I realized it all made sense when I considered I was installing my OS to a USB drive. The only thing that would make that better is a second slot just like it for dual OS drives, haha.

Cons: One problem I had with this board was the amount of force required. Usually in a PC build if I have to apply a lot of force, I think something is going wrong somewhere. An excessive amount of force was needed when lowering the load arm for the CPU mount after installing the CPU. I loosened the screw as much as possible, slid it down, then tightened the screw a little and it worked.

Another place where more than a good amount of force was required was installing the DIMMs. This actually led to another problem as I when I booted the system it would display an error code I could not find any documentation for online. It must have meant the DIMMs weren't installed correctly, because I forced them in as hard as I could without snapping the board and they eventually clicked in. I'm considering ordering another 16GB of RAM, but I'm worried about installing them...

0 out of 1 people found this review helpful. Did you? Yes No

  • Brian C.
  • 4/25/2015 6:47:42 AM
  • Ownership: 1 day to 1 week
  • Verified Owner

5 out of 5 eggsWow, what an experience.

Pros: This motherboard has it all for a server motherboard. Supermicro really did it's research on what a server motherboard should be. It has all the necessary network interfaces including the IPMI interface which is awesome if the server ever goes down or needs maintenance in the rack. Eliminates the need to purchase expensive IP KVM's. Works great in any super micro case with easy installation. ECC memory is spot on with kingston and works great. that in combination with the speed of the hd controller is excellent. I also vituralized this machine and the boot time and performance is excellent running a Xeon Processor. Total power consumption even under load I am getting around 45 watts of power which is great. Plenty of motherboard fan connectors. I always like to see extra fan connectors on the motherboard. Especially for the crazy nuts like I am that need 5 fans in a 1u case. Just be careful that no small animals walk in front of a case that has 5 fans for intake they might get sucked in.

Cons: You need a supermicro case as this motherboard has different motherboard contacts that are a little off from other motherboard contacts. Not really a con, but it does do a weird motherboard chime sound when it starts up. It might be normal but I am going to research that later. If the server is off, the LED lights remain on and still consume about 4 Watts of power. This I assume is by design because of the IPMI interface. Not a big deal 4 Watts of power because it's a server and more than likely it will not be off (unless for maintenance).

Other Thoughts: motherboard is very light weight easy to position. Just be careful with rear I/O connections as they are very thin and if you push too hard I could see them falling off. But if your an experienced installer you shouldn't have any problem with this. Stock cooler fits for 1150 socket. But I found switching out the cooler to a low profile cooler to fit a 1u case was much better and it does fit 1150 and 1156 socket brackets under the cooler area. I guess there isn't much of a space difference between the sockets.

Did you find this review helpful? Yes No

  • Jason B.
  • 3/6/2015 9:30:21 AM
  • Ownership: 1 day to 1 week
  • Verified Owner

5 out of 5 eggsSolid ESXI Home Board

Pros: As others have stated, the IPMI feature set is very nice for remote management. Took very little time to build the node which included this board, Intel E3-1270v3 (Bundle discount), 16G Crucial unbuffered server memory, and a rosewill 630 green power supply.

Cons: Didn't make coffee?

Other Thoughts: Not really a con, just notes. Had to slipstream the NIC drivers for ESXI using ESXI-customizer. Make sure you get the igb and the e1000 drivers.

2 out of 2 people found this review helpful. Did you? Yes No

  • Colin M.
  • 11/27/2014 1:04:57 PM
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsNice home server board

Pros: Board has been working well in a homebuilt NAS box for several months. First time I've used a server-grade board so it's been interesting seeing the differences. My old NAS was built with random parts but still worked OK. Since this is a headless machine, I have to say that the IPMI is my favourite feature. Being able to plug in power and network and do EVERYTHING else remotely, even configure the BIOS and install the OS, is extremely convenient.
Time will tell if it is as reliable as I hope but otherwise this a solid board.

Cons: The price premium over a standard desktop board. But, overall I feel it was worth it. Also the extra money spent on ECC RAM, but that wasn't very much in comparison.

Other Thoughts: When I first went to install the OS the system kept rebooting during the install process. I wasn't sure where the problem lay, and wasted time before remembering the IPMI module has its own basic error log! It correctly pointed to the power supply as the source of the problem. I wish all boards could have this.
Using with:
Intel Pentium G3420
Crucial 16GB ECC Unbuffered DDR3 1600
LSI 9207-8i HBA
Fractal Design Node 804
Many hard drives

2 out of 2 people found this review helpful. Did you? Yes No

  • Stephen C.
  • 7/19/2014 10:28:46 PM
  • Ownership: 1 day to 1 week
  • Verified Owner

3 out of 5 eggsWeird motherboard

Pros: It works

Cons: It has jumpers
The online manual isn't that great

Other Thoughts: I built a computer using this motherboard and a Xeon processor so I added my own video card since the Xeon doesn't do video. I plugged a power cable into the power supply and flipped the switch on the power supply and, without my hitting the power button, the computer comes on, but the is no video.

Since I couldn't tell what was going on, I flipped off the switch on the power supply and opened the case to see if I put the power switch cable in wrong. It was fine. Out of curiosity, I unplugged the power switch and reset switch cables, plugged in the power cable, flipped the switch on the power supply, and the computer turns on with no video! I then flipped the switch off, plugged the power and reset switch cables back in, flipped the switch on the power supply and the power comes on. This time, I press in the power button on the case, and the computer shuts down. It seems the motherboard was working, except for not displaying video.

I then guessed that the onboard video jumper needed to be set to off in order to get video from my video card, so I disabled the onboard video and the computer is working.

I am not sure why the computer comes on when I plug in the power cable to the power supply and flip the switch on it. It might be related to IPMI

0 out of 4 people found this review helpful. Did you? Yes No

  • John M.
  • 7/4/2014 8:48:10 AM
  • Ownership: 1 week to 1 month
  • Verified Owner

5 out of 5 eggsNice, cheap board for small server

Pros: I'm using this board as the basis for a FreeNAS server and couldn't be happier. The featureset is exactly what I need-- ECC, 6 SATAs, dual NICs plus BMC. And the VGA was useful for initial setup though now I just use the BMC and virtual console, virtual media, etc.

Cons: My sole issue was that impaired this with a very new CPU - core i3-4150, so it wouldn't post until I upgraded the firmware.

1 out of 1 people found this review helpful. Did you? Yes No

Compare Offers from All Sellers newegg

Seller Name & Rating Offer Details  
ICON Loading...

This product qualifies for Newegg's Price Match Guarantee. We'll match any qualifying competitor's price. Learn More

Selected Items

Best Service Sellers

Are you an E-Blast Insider? Subscribe Newegg e-Blast
Shop without retyping payment details. Secure shopping made faster.
Check out with PayPal.
Home > 
Components > 
Motherboards > 
Server Motherboards > 
SuperMicro > 
Item#: N82E16813182819
If the Adobe Reader does not appear when you click on a link for a PDF file, you can download Adobe Reader from the Adobe web site.