Skip to: | - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.

If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message. - Computer Parts, Laptops, Electronics, HDTVs, Digital Cameras and More!

Home > 
Components > 
Motherboards > 
Server Motherboards > 
SuperMicro > 
Item#: N82E16813182821

SUPERMICRO MBD-X10SL7-F-O Micro ATX Server Motherboard LGA 1150 Intel C222 DDR3 1600

  • LGA 1150
  • Intel C222
  • 4 x 240 pin

ICON Loading...
  • Overview
  • Specifications
  • Warranty & Returns
  • Reviews

SUPERMICRO MBD-X10SL7-F-O Micro ATX Server Motherboard


  • Single socket H3 (LGA 1150) supports Intel® Xeon® E3-1200 v3/v4, 4th gen. Core i3, Pentium, Celeron processors
  • Intel® C222 Express PCH
  • Up to 32GB DDR3 ECC 1600MHz UDIMMs in 4 sockets
  • Dual Gigabit Ethernet LAN ports via Intel® i210AT
  • 2x SATA (6Gbps), 4x SATA (3Gbps)
  • 8x SAS2 (6Gbps) via LSI 2308
  • Expansion slots: 1x PCI-E 3.0 x8 (in x16), 1x PCI-E 2.0 x4 (in x8)
  • 2x USB 3.0 (1 Type-A + 1 via header) 6x USB 2.0 (4 rear + 2 via header)
  • Integrated IPMI 2.0 with KVM and Dedicated LAN
  • SATA DOM power connector support
  • VGA D-sub connector, TPM header


Product SKUs
MBD-X10SL7-F X10SL7-F (Bulk Pack)
Physical Stats
Form Factor microATX
Dimensions 9.6" x 9.6", (24.4cm x 24.4 cm)
  • Intel® Xeon® processor E3-1200 v3/v4 and 4th Gen Core i3, Pentium, Celeron processors
  • Single Socket H3 (LGA 1150)
System Memory
Memory Capacity
  • 4x 240-pin DDR3 DIMM sockets
  • Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 8GB, 4GB, 2GB, 1GB
Memory Voltage 1.5V, 1.35V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset Intel® C222 Express PCH
  • SATA3 (6Gbps) w/ RAID 0, 1
  • SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
  • SAS2 (6Gbps) via LSI 2308
  • SW RAID 0, 1, 1E, 10 support
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Aspeed AST2400 with 10/100/1000M bps MAC
Network Controllers
  • Intel® i210AT dual port GbE Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8211E PHY (dedicated IPMI)
VGA BMC integrated Aspeed AST2400
Input / Output
Serial ATA
  • 2x SATA3 (6Gbps) ports
  • 4x SATA2 (3Gbps) ports
  • 8x SAS2 (6Gbps) ports
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
  • 2x USB 3.0 ports (1 via header, 1 Type-A)
  • 6x USB 2.0 ports (4 rear, 2 via header)
VGA 1x VGA D-Sub Connector
Serial Port / Header 2x COM ports (1 rear, 1 header)
DOM SATA DOM (Disk on Module) power connector support
TPM 1x TPM 1.2 20-pin Header



Whats in the Box


Learn more about the SuperMicro MBD-X10SL7-F-O

Warranty, Returns, And Additional Information
  • Warranty
  • Limited Warranty period (parts): 1 year
  • Limited Warranty period (labor): 3 years
  • Read full details

Customer Reviews of the SuperMicro MBD-X10SL7-F-O

Do you own this product? Write a Review

ICON Loading...

Filter Results

  • Maxime C.
  • 11/5/2015 11:30:37 AM
  • Tech Level: High
  • Ownership: 1 week to 1 month
  • Verified Owner

5 out of 5 eggsAwesome

Pros: IPMI is awesome, plenty of sata ports, the LSI controller is easy to flash in IT mode

Cons: Very picky on ram. Make sure you get the ram from the QVL. Bios will loop if no boot media is inserted. Bios menu appears 2-3 times even if you chose enter setup but will eventually get there. This can be confusing at first.

Other Thoughts: I used Crucial CT2KIT102472BD160B memory and it worked great. It didn't work with my random kingston ram.

1 out of 1 people found this review helpful. Did you? Yes No

  • Harvey M.
  • 8/31/2015 8:00:11 AM
  • Tech Level: Somewhat High
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsGreat Board for FreeNAS

Pros: Lots of SAS/SATA ports. IMPI is awesome. IMO this is one of the best boards you can buy for a medium to highend FreeNas build. You would come out cheaper with this board versus getting a board that does not have as many SAS/SATA ports and having to buy a SAS/SATA card down the road. Easy to flash to IT mode.

Cons: I notice that the SAS controller heatsink gets really hot. Make sure board is put in a case with really good air flow. I had to place a 80mm fan next to the board in my 4u server case (Norco RPC 450) to help with cooling it.

2 out of 2 people found this review helpful. Did you? Yes No

  • Gordon D.
  • 8/11/2015 8:12:41 AM
  • Tech Level: High
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsGreat NAS motherboard

Pros: Does exactly what I want it to. Great features, a good price, and rock solid so far. IPMI is especially nice on a mobo in this price range.

Cons: It might have been nice to have two 8087 ports rather than 8 individual SAS ports. I'll need to use a SAS reverse breakout cable if I want to connect to a backplane or expander.

Other Thoughts: Installed Proxmox. Flashed SAS chipset to IT mode and passed it through to a NAS VM using VT-d. Works great.

2 out of 2 people found this review helpful. Did you? Yes No

  • Maxime P.
  • 6/16/2015 6:21:42 AM
  • Tech Level: High
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsbest server mobo

Pros: just works as it should,solid.Runs my freenas server with no problem.3 months of piece.

Cons: none yet

Other Thoughts: will upgrade to a better cpu
happy geek.

Did you find this review helpful? Yes No

  • Lutz H.
  • 3/19/2015 12:27:46 PM
  • Tech Level: High
  • Ownership: 1 week to 1 month
  • Verified Owner

5 out of 5 eggsThe best budget home server board

Pros: I initially purchased the X10SAE because it has more native SATA ports. That board has more issues than I was willing to deal with so I went with this X10SL7-F.
They are completely different motherboards. This one booted into FreeNAS without any problems, I got everything set up and working very quickly.
The LSI controller works like a charm in IT mode on FreeNAS, that was the only advanced thing I had to do in order to have a good setup, and went without problems.

The board is very well behaved in FreeNAS. USB works without warnings or errors or timeouts (unlike a certain X10SAE), no crazy interrupt storms (again... SAE). There is no unneeded hardware on the board and you get a dedicated IPMI port.

Overall I am very happy with this choice. For the money, there are a lot of server features that you can not get from other "server" boards (really workstation boards..)

Cons: I haven't had any problems with this board at all. It's all business, no nonsense and has been running 24x7 since the OS install was done.

Other Thoughts: You may want to make sure that the Watchdog is disabled in BIOS, and perhaps also set the board jumper for Watchdog to "NMI" instead of "Reset". Some OS can not handle the watchdog properly and in the default config, your board will issue a hardware reset every 5 minutes. It can be very irritating until you figure that out.

5 out of 5 people found this review helpful. Did you? Yes No

  • Bruce G.
  • 3/7/2015 11:29:45 AM
  • Tech Level: Somewhat High
  • Ownership: 1 week to 1 month
  • Verified Owner

5 out of 5 eggsGreat NAS Board

Pros: Everything you need for a NAS and nothing you don't.
IPMI to run headless.
Integrated LSI 2308 6GBps 8 port Controller
4 SATA 2, 2 SATA3, 1 DOM power connector
2 Intel 1GBps NIC, IPMI NIC
Extra PCIe 8x slots for HBAs
Haswell Support for current v3 Xenons or Core i3s
ECC memory up to 32GB

Connect CPU cooler to FAN-1, FAN-A is for case fans. Get large PWM fans with 800rpm minimum speed for PWM control to keep disks cool.

Cons: A little tricky to get the thermal design right in a desktop mid tower case. This motherboard is meant to be used in a rack able case with high rpm fans. If you don't want to cook your disks buy Deltas or Industrial high rpm Noctuas

Other Thoughts: If you planning on running less than 8 disks save some money and get the X10SLL or SLM instead

4 out of 4 people found this review helpful. Did you? Yes No

  • Carlos M.
  • 2/20/2015 3:42:45 AM
  • Tech Level: High
  • Ownership: 1 month to 1 year

5 out of 5 eggsYes. VSAN

Pros: I am running four of these boards in 514 short depth 1u chassis. Four Intel Xeon E3-1230V3, with 16GB+ Crucial CT2KIT102472BD160B per host. They are a lab VSAN cluster. The LSI2308 SAS chip is HCL certified, simply goes in IT mode (use usb stick+efi). Runs great using HDPLEX 160W DC-ATX Power Supply, HDPLEX Internal 120W AC-DC adapter for each 1u Host. Supplies plenty/stable power, foreach running: Dual Gb-NIC, One Samsung 850pro (esxi/host-cache), One Intel DC S3700 Ent SSD, and 2x 3.5 Sam E.3 SAS/1TB/72k. North bridge heatsinks swapped with Enzotech BGA. Fully VSAN HCL and performs!

Cons: 24/7 99% cpu/load, and on all four hosts has not been verified. The Supermicro 1.42 IPMI firmware does bug out on graphical shell booted from any esxi boot volume (graphical corruption). So if you want a usable interface over iKVM/iPMI boot from non efi.

Other Thoughts: After each ESXi install go ahead an update to the latest LSI 9207 firmware using Vmware VIB LSI package/software. If you in IT mode (passthrough) keep it clean remove any boot roms, you don't need. Supermicro's IPMI is also unlockable allowing you to CLI bios changes, exports, imports, updates, etc. Without the SUM tool, the $20 unlock only provides the ability to flash the motherboard bios via the IPMI web interface. Go pro and link you motherboards bios to a git repo and subversion and script scheduled updates and upgrades. Granted the boards on my cluster has APC, PDU, and console servers on an OOB. |;)

3 out of 3 people found this review helpful. Did you? Yes No

  • Andrew C.
  • 2/17/2015 7:08:51 PM
  • Tech Level: Somewhat High
  • Ownership: 1 day to 1 week
  • Verified Owner

5 out of 5 eggsAwesome motherboard

Pros: Many SATA/SAS ports
IPMI works and is very handy

Cons: None

Did you find this review helpful? Yes No

  • Stephane O.
  • 2/14/2015 6:13:15 PM
  • Tech Level: Somewhat High
  • Ownership: 1 day to 1 week
  • Verified Owner

5 out of 5 eggsGreat motherboard if you're looking for loads of SATA ports.

Pros: Plenty of Sata ports and built in SAS raid via LSI 2308.

Cons: Version 19 of the Raid Controller will not detect Sata drives, had to use version 16.

Other Thoughts: Got this model with intention of using it as a FreeNAS machine.
Used the following hardware:
Intel Xeon E3-1231V3 Haswell 3.4GHz LGA 1150 80W
2 x Crucial 16GB (2 x 8GB) 240-Pin DDR3 SDRAM ECC Unbuffered DDR3 1600 (PC3 12800)
SUPERMICRO CSE-825TQ-R700LPB Black 2U Rackmount Server Case

Motherboard detected all 32GB of ram.
I flashed the raid to be used in IT mode. The newest version did not work, drives where not being detected.
Flashed with version 16 and it worked. All SATA drives connected via the SAS connectors on the motherboard are detected.
Currently testing with random 250GB drives, will upgrade to 4TB drives once I feel like spending the extra cash.

4 out of 4 people found this review helpful. Did you? Yes No

  • Kent S.
  • 1/27/2015 7:53:15 AM
  • Tech Level: Somewhat High
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsGreat all-in-one board

Pros: IPMI - I will never buy another server motherboard without it
14 SATA ports
2 LAN ports
Integrated 8 port RAID
Firmware was up to date
Excellent quality
Save a tree - manual is downloadable

Cons: Documentation harder to find
USB 3.0 ports don't work in FreeNAS or SmartOS
Fan control must be done manually

Other Thoughts: Took Mynorx's advice. CT2KIT102472BD160B works without issue
This board came with an updated firmware. I was able to use an e3-1231v3 and a g3220 without issue.
Supermicro has the IT firmware for the LSI 2308 chipset. Flashed the LSI 2308 to IT mode without issue.
I am able to see SMART info on drives connected to the LSI 2308 in FreeNAS and Linux. I can not see SMART info in SmartOS. I think this is Smartmon/Illumos issue.
With moderate testing, the board works with ESXi, FreeNAS, SmartOS, and Linux (Knoppix, Centos, Ubuntu)
A reviewer mentioned that there is no information on which fan header to plug your CPU fan into. This information is stamped on the board. This is also depicted in the manual.

My next board will Supermicro

4 out of 4 people found this review helpful. Did you? Yes No

Compare Offers from All Sellers

Seller Name & Rating Offer Details  
ICON Loading...

This product qualifies for Newegg's Price Match Guarantee. We'll match any qualifying competitor's price. Learn More

Volume Discounts Available
  • 2-4 $245.99 ea.
  • 5-9 $239.99 ea.
  • 10+ $219.99 ea.
Selected Items

Best Service Sellers

Are you an E-Blast Insider? Subscribe Newegg e-Blast
Shop without retyping payment details. Secure shopping made faster.
Check out with PayPal.
Home > 
Components > 
Motherboards > 
Server Motherboards > 
SuperMicro > 
Item#: N82E16813182821
If the Adobe Reader does not appear when you click on a link for a PDF file, you can download Adobe Reader from the Adobe web site.