Skip Image Gallery

MSI Graphics Card Bolster

Be the first to review this product...

Sold and Shipped by Newegg

Specifications
Warranty & Returns
Reviews
Q&A

Model

Brand: MSI

Features

Features: All-around Protection: protecting the motherboard from being damaged by the weight of graphics card

Gas Spring Design: vertical support between top and bottom of case, fit the cases from 390mm (height) to 680mm

Anti-shock Rubber Base: absorb the pressure from gas spring and prevent the cases from being scratched by the Jack

Solid Graphics Card Lifter: plastic holders featuring rubber pad to buffer vibration and protect the thermal cover

Graphics Card Bolster Manual

A. Component List
1. Gas Spring x 1 (Black Coating)
2. Rubber Base x 2 (Black)
3. Horizontal Support x 3 (Black)
4. Manual x 1

B. Installation
1. Loosen the screw sets on the horizontal supports and slide them onto the gas spring.
2. Screw the rubber bases to both ends of the gas spring.

C. Installation into case
1. For easier installation, position the case on its side as indicated in the visual.
2. Push both ends of the gas spring inward far enough to fit it into your case. Once the Graphics Card Bolster is in your case, let both ends reach out to connect to the top and the bottom of your case.
3. Adjust the horizontal supports to gently touch the bottom of the CPU heat sink or graphics card(s). Make sure that the supports do not touch any moving parts like fans. Tighten the screws to secure the supports in place.

D. Test and Adjustment
1. Return the case to an upright position and check to see if the CPU heat sink and graphics card(s) are being supported.
2. If you are happy with the result, you can proceed to close your case. If further adjustments are needed, repeat Process C to D.