Skip to: | - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.

If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message. - Computer Parts, Laptops, Electronics, HDTVs, Digital Cameras and More!

Home > 
Components > 
Hard Drives > 
Controllers / RAID Cards > 
SIIG, Inc > 
Item#: N82E16816150032

SIIG SC-SA0M11-S1 PCI-Express 2.0 Low Profile Ready SATA III (6.0Gb/s) 2-Port Host Adapter

  • 2 x eSATA External Connectors
  • Up to 6Gb/s

ICON Loading...
  • Overview
  • Specifications
  • Warranty & Returns
  • Reviews

SIIG's DP eSATA 6Gb/s 2-Port PCIe is a high performance eSATA host adapter designed to add two external SATA (eSATA) 6Gb/s channels to your PCIe-equipped computer for additional hard disk drive connections. It supports SATA hard disk drives up to 3TB, ATA/ATAPI-7 specification as well as port multiplier. This dual-profile host adapter can be installed in standard height or low profile chassis with the included bracket. It is the ideal solution to enable fast, large volume data transferring for your bandwidth-hungry applications.

The DP SATA 6Gb/s 2-Port PCIe host adapter is fully compliant with PCI Express Base Specification Revision 2.0, Serial ATA specification revision 3.0 with FCC Class B (DoC) and CE regulatory approved and RoHS-compliant. It supports a wide variety of Windows operating systems and is backed by SIIG's limited 5-year warranty.

Learn more about the SIIG, Inc SC-SA0M11-S1

Warranty, Returns, And Additional Information
  • Warranty
  • Limited Warranty period (parts): 5 years
  • Limited Warranty period (labor): 5 years
  • Read full details

Customer Reviews of the SIIG, Inc SC-SA0M11-S1

Do you own this product? Write a Review

ICON Loading...

Filter Results

  • SOREN S.
  • 4/18/2015 2:59:51 PM
  • Tech Level: High
  • Ownership: 1 day to 1 week

5 out of 5 eggsNo Problems

Pros: It comes with a low profile bracket.

Cons: None that I can see.

Other Thoughts: I installed this card in an HP Pro Liant DL385 G7 server for the purpose of doing backups over eSATA to an IcyDock MB559U3S-1SB external enclosure. Windows Server 2008 R2 installed drivers without needing to insert the enclosed disc. There were no conflicts between this card and the already installed Smart Array P410i RAID card.

Did you find this review helpful? Yes No

  • Ryan H.
  • 12/2/2012 6:55:37 AM
  • Tech Level: High
  • Ownership: 1 day to 1 week
  • Verified Owner

3 out of 5 eggsRocky at first, but steady for now

Pros: No fuss 2 eSATA port pci express card using 1 lane
Works with Sans Digital 4 Bay eSATA Port Multiplier JBOD Tower Storage Enclosure (no eSATA Card bundle) TR4M+BNC and 4 2TB drives (2 Seagate, 2 Toshiba)
Works under latest ubuntu server (12.10, 64-bit) with sata_sil driver after disabling drive write cache (WCE=0)

Cons: Only running drives in SATA2 mode, not SATA3. During card bios boot it shows drives running at SATA2 level even though the card and drives support SATA III

Had to upgrade Ubuntu server to the latest to get the drives to quick throwing SATA errors. Required disabled drive write cache to keep the array error free.

Other Thoughts: This isn't a Sil312X cihpset, rather an Asmedia 1061; which is supported under linux, it certainly isn't error free. In fact, I ordered a second esata controller just in case this one continued to have trouble. It's been stable copying close to 100MB/s for the past 24 hours as I mirror over 5.2TB of data. I ended up doing the following to get things stablized.

1) upgraded to 12.10 64-bit (3.5.0-19-generic)
2) used hdparm to disable the write-cache on each drive (hdparm -W 0 /dev/sdX)
3) reboot the host to allow scsi layer to recognize drives have WCE=0

After this, I've had zero drive stalls (iostat shows drive at 100% utilization but with no read/write activity) and no other errors showing in dmesg.

2 out of 3 people found this review helpful. Did you? Yes No

  • Eric B.
  • 5/4/2012 12:49:10 PM
  • Tech Level: High
  • Ownership: 1 week to 1 month
  • Verified Owner

3 out of 5 eggsKinda works

Pros: Works fine with individual drives and installation was painless (Dell Optiplex 790 w/ Win7-64)

Cons: Doesn't work properly with my Addonics port multiplier (based on a Jmicron chip). The system would freeze randomly with the multiplier connected and on the occasions where it wouldn't freeze, data transfer was very slow. Wasted a ton of time in troubleshooting.

Other Thoughts: Give this one a pass if you're considering using a port multiplier. Not sure if fault lies with this card or the Asmedia 1061 chip it's based on. I've since replaced it with an eSATA card that uses a Silicon Image 3132 chip and the setup works fine.

4 out of 4 people found this review helpful. Did you? Yes No

  • Dean M.
  • 5/2/2012 9:34:43 AM
  • Tech Level: High
  • Ownership: 1 week to 1 month
  • Verified Owner

5 out of 5 eggsWorks great... port multipler works!

Pros: - Solid eSATA option with port multiplier
- Does not impact boot times like RAID cards

Cons: - SIIG website is not updating their drivers in timely manner
- price (I believe there are several other cards with the same AsMedia hardware for a cheaper price -- at the time of purchase I did not realize the hardware was same)

Other Thoughts: I purchased this eSATA card because Intel has not implemented driver support for port multiplier (the hardware is there) in their 6-series boards. I backup my WHS 2011 server to an external eSATA enclosure once per week, then I turn the enclosure off and store it in a separate building.

Before installing this card I was using a HighPoint RR622 raid card. It worked but it caused significant delays in booting the computer, and management of hot-plug (safely remove hardware) was cumbersome.

I installed the drivers from the SIIG site (1.2.6) and there was a problem when unplugging my eSATA enclosure. After safely removing each drive after backup, then turning off the enclosure itself, the drivers did not recognize the drives as being disconnected (still showed as ready for removal in Device Manager). Downloaded drivers from (1.3.4) and they corrected this problem. SIIG should update their drivers more often.

3 out of 3 people found this review helpful. Did you? Yes No

Compare Offers from All Sellers

Seller Name & Rating Offer Details  
ICON Loading...
Volume Discounts Available
  • 2+ $20.99 ea.

Send It As A Gift!

gift services details
Selected Items

Best Service Sellers

Are you an E-Blast Insider? Subscribe Newegg e-Blast
Shop without retyping payment details. Secure shopping made faster.
Check out with PayPal.
Home > 
Components > 
Hard Drives > 
Controllers / RAID Cards > 
SIIG, Inc > 
Item#: N82E16816150032
If the Adobe Reader does not appear when you click on a link for a PDF file, you can download Adobe Reader from the Adobe web site.