Skip to: |

Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.

If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.

Newegg.com - Computer Parts, Laptops, Electronics, HDTVs, Digital Cameras and More!

Sign up today for a 30-day free trial of Newegg Premier
  • Shipping Destination: United States
  • Wish List
  • Feedback
  • Help
Search all
Search
Home
Home > 
Computer Hardware > 
Hard Drives > 
Controllers / RAID Cards > 
SIIG, Inc > 
Item#: N82E16816150032

SIIG SC-SA0M11-S1 PCI-Express 2.0 Low Profile Ready SATA III (6.0Gb/s) 2-Port Host Adapter

  • 2 x eSATA External Connectors
  • Up to 6Gb/s
  • Pin It
  • Email this page
ICON Loading...

SIIG's DP eSATA 6Gb/s 2-Port PCIe is a high performance eSATA host adapter designed to add two external SATA (eSATA) 6Gb/s channels to your PCIe-equipped computer for additional hard disk drive connections. It supports SATA hard disk drives up to 3TB, ATA/ATAPI-7 specification as well as port multiplier. This dual-profile host adapter can be installed in standard height or low profile chassis with the included bracket. It is the ideal solution to enable fast, large volume data transferring for your bandwidth-hungry applications.

The DP SATA 6Gb/s 2-Port PCIe host adapter is fully compliant with PCI Express Base Specification Revision 2.0, Serial ATA specification revision 3.0 with FCC Class B (DoC) and CE regulatory approved and RoHS-compliant. It supports a wide variety of Windows operating systems and is backed by SIIG's limited 5-year warranty.


Learn more about the SIIG, Inc SC-SA0M11-S1

Model

Brand
SIIG
Model
SC-SA0M11-S1
Form Factor
Low Profile Ready

Specifications

Type
SATA III (6.0Gb/s)
External Connectors
2 x eSATA
Interface
PCI-Express 2.0
Transfer Rate
Up to 6Gb/s
Operating Systems Supported
Windows 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / Server 2008 R2
Dimensions
3.50" (W) x 4.75" (H) x 0.75" (D)

Features

Features
Chipset: Asmedia ASM1061

Compliant with Serial ATA specification, Revision 3.0

Compliant with PCI Express Base specification, Revision 2.0

Supports ATA/ATAPI-7 specification

Supports port multiplier

Supports Native Command Queuing (NCQ)

Supports 6Gb/s data transfer rate

Works with the latest 6Gb/s SATA HDDs and backwards compatible with 3Gb/s & 1.5Gb/s HDDs

Adds 2 external SATA (eSATA) 6Gb/s channels to your PCIe system

Installs in standard height or low profile chassis with included brackets.

Packaging

Package Contents
DP SATA 6Gb/s 2-Port PCIe
Spare low profile bracket
Driver CD
User's manual

Quick Info

Warranty

  • Limited Warranty period (parts): 5 years
  • Limited Warranty period (labor): 5 years


Customer Reviews of the SIIG, Inc SC-SA0M11-S1

Do you own this product? Write a Review

ICON Loading...

Filter Results

Go
  • Ryan H.
  • 12/2/2012 6:55:37 AM
  • Tech Level: High
  • Ownership: 1 day to 1 week
  • Verified Owner

3 out of 5 eggsRocky at first, but steady for now

Pros: No fuss 2 eSATA port pci express card using 1 lane
Works with Sans Digital 4 Bay eSATA Port Multiplier JBOD Tower Storage Enclosure (no eSATA Card bundle) TR4M+BNC and 4 2TB drives (2 Seagate, 2 Toshiba)
Works under latest ubuntu server (12.10, 64-bit) with sata_sil driver after disabling drive write cache (WCE=0)

Cons: Only running drives in SATA2 mode, not SATA3. During card bios boot it shows drives running at SATA2 level even though the card and drives support SATA III

Had to upgrade Ubuntu server to the latest to get the drives to quick throwing SATA errors. Required disabled drive write cache to keep the array error free.

Other Thoughts: This isn't a Sil312X cihpset, rather an Asmedia 1061; which is supported under linux, it certainly isn't error free. In fact, I ordered a second esata controller just in case this one continued to have trouble. It's been stable copying close to 100MB/s for the past 24 hours as I mirror over 5.2TB of data. I ended up doing the following to get things stablized.

1) upgraded to 12.10 64-bit (3.5.0-19-generic)
2) used hdparm to disable the write-cache on each drive (hdparm -W 0 /dev/sdX)
3) reboot the host to allow scsi layer to recognize drives have WCE=0

After this, I've had zero drive stalls (iostat shows drive at 100% utilization but with no read/write activity) and no other errors showing in dmesg.

2 out of 3 people found this review helpful. Did you? Yes No

  • Eric B.
  • 5/4/2012 12:49:10 PM
  • Tech Level: High
  • Ownership: 1 week to 1 month
  • Verified Owner

3 out of 5 eggsKinda works

Pros: Works fine with individual drives and installation was painless (Dell Optiplex 790 w/ Win7-64)

Cons: Doesn't work properly with my Addonics port multiplier (based on a Jmicron chip). The system would freeze randomly with the multiplier connected and on the occasions where it wouldn't freeze, data transfer was very slow. Wasted a ton of time in troubleshooting.

Other Thoughts: Give this one a pass if you're considering using a port multiplier. Not sure if fault lies with this card or the Asmedia 1061 chip it's based on. I've since replaced it with an eSATA card that uses a Silicon Image 3132 chip and the setup works fine.

4 out of 4 people found this review helpful. Did you? Yes No

  • Dean M.
  • 5/2/2012 9:34:43 AM
  • Tech Level: High
  • Ownership: 1 week to 1 month
  • Verified Owner

5 out of 5 eggsWorks great... port multipler works!

Pros: - Solid eSATA option with port multiplier
- Does not impact boot times like RAID cards

Cons: - SIIG website is not updating their drivers in timely manner
- price (I believe there are several other cards with the same AsMedia hardware for a cheaper price -- at the time of purchase I did not realize the hardware was same)

Other Thoughts: I purchased this eSATA card because Intel has not implemented driver support for port multiplier (the hardware is there) in their 6-series boards. I backup my WHS 2011 server to an external eSATA enclosure once per week, then I turn the enclosure off and store it in a separate building.

Before installing this card I was using a HighPoint RR622 raid card. It worked but it caused significant delays in booting the computer, and management of hot-plug (safely remove hardware) was cumbersome.

I installed the drivers from the SIIG site (1.2.6) and there was a problem when unplugging my eSATA enclosure. After safely removing each drive after backup, then turning off the enclosure itself, the drivers did not recognize the drives as being disconnected (still showed as ready for removal in Device Manager). Downloaded drivers from station-drivers.com (1.3.4) and they corrected this problem. SIIG should update their drivers more often.

3 out of 3 people found this review helpful. Did you? Yes No

ICON Loading...
Are you an E-Blast Insider? Subscribe Newegg e-Blast
PayPal
Shop without retyping payment details. Secure shopping made faster.
Check out with PayPal.

Home
Home > 
Computer Hardware > 
Hard Drives > 
Controllers / RAID Cards > 
SIIG, Inc > 
Item#: N82E16816150032
Related Products
RAID 0/1 2 x SATA 6.0Gb/s Internal Connectors ...
SIIG's DP eSATA 6Gb/s 2 Port PCIe i/e ...
The ExpressSAS H6F0 provides high speed 6Gb/s performance ...
Shop by Region: United States | Canada | China
VeriSign Click for the BBB Business Review of this Computers - Supplies & Parts in Whittier CAThis site protected by Trustwave's Trusted Commerce program Inc500
Policy & Agreement | Privacy Policy  © 2000-2014 Newegg Inc.  All rights reserved.
If the Adobe Reader does not appear when you click on a link for a PDF file, you can download Adobe Reader from the Adobe web site. nassau