Rosewill RHMS-11004 13" – 27" Flat-Panel Monitor Tilt Mounting Kit

Pros: Relatively lightweight considering how strongly built. Simple design. Wallplate mounts solidly on wall stud with two large screws, supplied. Monitor plate attaches to monitor with a variety of screws, supplied, hooks onto wallplate and lifts off easily. Tilts up and down, locks position with 4 bolts that are combo 10mm hex/#3 Phillips drive. More than enough for a lightweight monitor.

Cons: Limited uptilt.

Other Thoughts: OSHA recommended height is with top of screen at eye level or slightly below, so remember that uptilt is limited.

Pros: This item will allow you to tilt the monitor up and down slighly. It is very thick (>1/8") and will handle any monitor which can be mounted to it with the provided mounting holes. Good quality construction. Includes decent hardware.

Cons: No swivel or depth adjustment.

Other Thoughts: Buying another and will pick this item for future basic mount need fulfillment.

Pros: Easy to mount
Strong Construction

Cons: Tilt is not adjustable

Other Thoughts: Mounted (2) asus 24 inch monitor side-by-side with (2) mounts. Sturdy and enough clearance for power, DVI & HDMI cables. Also installed a powerbridge behind the monitor to run cables thru the wall. Clean wire-free install.

Pros: Does exactly what it is supposed to do. Simple and easy to install.

Cons: For the price, none

Other Thoughts: This mount lacks the adjust-ability of a more elaborate mount...however a more elaborate mount will cost considerably more. It is worth the price if your intention is to move your monitor from your desk to the wall. Worked exactly as I hoped it would!

Pros: Mounts up just fine. Easy to read instructions. All hardware included.

Cons: None

Other Thoughts: I used this on a 24" Hanns G. Bolted right up. Has several patters for use on a variety of monitors.

Pros: Simple design, easy to install

Cons: Maybe a little too "light" a construction

Other Thoughts: I used this to mount a 20" widescreen monitor. It was so close to the wall that the monitor cable is severely strained. Plan on a 90 degree adapter for the video cable.

Pros: Definitely an industrial quality mount that is built to withstand some abuse. 1/4" bolts hold the mount in place at the joints, and the assortment of screws provided show accommodate any VESA compliant monitor.

Cons: Wish that it would have come with locking washers, as my application will not be on a mobile pole on wheels, but no one ever provides them on any mount I have installed.

Other Thoughts: Using this devise and two trellis O clamps to mount a 22in Monitor to a high quality IV pole on wheels as part of my karaoke show. The end cost for me was just under $50 for the mount, clamps, and a used IV Pole on CraigsList, which was far cheaper than the $100 low quality retail stand.

Pros: Compact wall mount for computer monitors. Very practical if you have limited space for your computer.
Very easy to adjust and a good solid construction.

Cons: None

Other Thoughts: I bought two of these to use on a monitor stand to give me some extra pivot on my outer monitors. I am sure this is not what the engineer had in mind when they designed it so I had to drill a few holes in the wall plate to match it up with my monitor stand. Works great though.