Pros: affordable, well made, black, level included, all hardware included

Cons: n/a

Other Thoughts: When I bought these I didn't need telescoping, in fact I prefer to not have telescoping. However, I didn't use these as intended. I didn't want to be able to tilt either. LOL
What I did was mounted them horizontal instead of vertical. This is because I have two monitors and I wanted to angle one to the right, and angle the other to the left. (this isn't how they are supposed to be mounted but they are built rugged enough that it worked for my two 22" monitors mounted this way.
I did however use toggle bolts (molly bolts) instead of the plastic anchors that they came with. I liked the fact they came with a little level in the box.

Pros: Great value.

Cons: None.

Other Thoughts: Could use an etched in arrow on both parts to remove having to think about which way to mount each part.

Pros: This mount is very simple, and very sturdy. It comes in two parts, a wall mount plate and a monitor mount plate. They are made of fairly thick steel and connect with 4 good-sized bolts.

It is very compact and mounts the monitor close to the wall, but not so close that you can't get behind.

The up-down adjustments are enough, but you should mount the monitor high enough for the expected user height first, and then only fine tune from there, or adjust for individual preference. There are no sideways adjustments.

The monitor mounting plate hangs on the wall mounting plate, even when the bolts are not tight, allowing you to adjust and manipulate it, and connect cables, before tightening everything down. Also, it's easy to tighten once in place, or even loosen so that you can get back behind there later. You just need a large, long, screwdriver.

For $15 it's impossible to go wrong with this mount.

Cons: The screw package that comes with the mount has 2 masonry anchors, and some other screws, but no drywall anchors. I would imagine that most customers will be installing into drywall, not cinder block. Luckily I had my own achors.

If it could be about 1/4" out further from the wall that would be perfect, but that really is splitting hairs, and considering it's adjustability and mounting method, it's a pitiful complaint.

Other Thoughts: The wall mount plate is attached to the wall with 4-6 screws and has 4 bolts used to hang/mount the monitor mount plate onto. With the monitor mounting plate attached to the monitor you just hang one onto the other (assuming you didn't mount one or both upside down).

With the mounting bolts left slightly loose (just so the monitor moves, not so the bolts wobble), the monitor tilts down or up easily, allowing you to connect the cables. Or you can connect the cables before hanging it. There is enough space behind so that with a long Phillips screwdriver (like with a 15"+ #2 tip) you can tighten the bolts and adjust your monitor to the orientation you like best.

I don't know how much this mount is rated to hold, but I believe that if I used the kind of drywall anchors on this that I had used on my TV, I could stand on it. I am very pleased with this mount. It gets 4 eggs not 5 because of the poor packaging and lack of included anchors.

Pros: Build seems solid. Cheap.

Cons: I've given this 3 instead of 1 due to the specificity of my circumstances. I bough tthis mount with the intent of placing an Asus Chromebox inside the mount after mouting a TV/monitor to a wall. The dimensions listed indicated it would be a near perfect fit, but the actual dimensions are significantly smaller than advertised.

Pros: Nice and sturdy. Servs my need well.

Cons: None

Pros: Exceptionally rigid metal. Well bored holes with no burrs. Quality hardware included. Screws for monitor included if your monitor doesn't already have it. I was instantly impressed with the finish on it.

Cons: None so far.

Other Thoughts: I remember rosewill making peripherals that weren't the best quality. I decided to take a shot with this mount because I wanted something cheap that would be as close to the wall as possible. I could not be happier. This thing is thin enough to where I will need to buy a 90 degree adapter for my DVI cable which is GREAT because it means the monitor is only an inch or so away from the wall.

Pros: works as advertised. very sturdy. great value.

Cons: none

Pros: Relatively lightweight considering how strongly built. Simple design. Wallplate mounts solidly on wall stud with two large screws, supplied. Monitor plate attaches to monitor with a variety of screws, supplied, hooks onto wallplate and lifts off easily. Tilts up and down, locks position with 4 bolts that are combo 10mm hex/#3 Phillips drive. More than enough for a lightweight monitor.

Cons: Limited uptilt.

Other Thoughts: OSHA recommended height is with top of screen at eye level or slightly below, so remember that uptilt is limited.

Pros: This item will allow you to tilt the monitor up and down slighly. It is very thick (>1/8") and will handle any monitor which can be mounted to it with the provided mounting holes. Good quality construction. Includes decent hardware.

Cons: No swivel or depth adjustment.

Other Thoughts: Buying another and will pick this item for future basic mount need fulfillment.

Pros: Easy to mount
Strong Construction

Cons: Tilt is not adjustable

Other Thoughts: Mounted (2) asus 24 inch monitor side-by-side with (2) mounts. Sturdy and enough clearance for power, DVI & HDMI cables. Also installed a powerbridge behind the monitor to run cables thru the wall. Clean wire-free install.