CISCO Nexus 5000 Series N5K-C5010P-BF 10/100/1000Mbps + 10 Gigabit Switch

Learn more about the Cisco Systems, Inc. N5K-C5010P-BF

Standards: IEEE 802.1D: Spanning Tree Protocol

IEEE 802.1p: CoS prioritization

IEEE 802.1Q: VLAN tagging

IEEE 802.1s: Multiple VLAN instances of Spanning Tree Protocol

IEEE 802.1w: Rapid reconfiguration of Spanning Tree Protocol

IEEE 802.3: Ethernet

IEEE 802.3ad: LACP with fast timers

IEEE 802.3ae: 10 Gigabit Ethernet

SFF 8431 SFP+ CX1 support

RMON

Security: Ingress ACLs (standard and extended) on Ethernet and virtual Ethernet ports

Standard and extended Layer 2 ACLs: MAC addresses, protocol type, etc.

Standard and extended Layer 3 to 4 ACLs: IPv4 and v6, Internet Control Message Protocol (ICMP), TCP, User Datagram Protocol (UDP), etc.

VLAN-based ACLs (VACLs)

Port-based ACLs (PACLs)

Named ACLs

ACL logging and statistics

Optimized ACL distribution

Power: Typical operating power: 350W

Maximum power: 450W

Input voltage: 100 to 240 VAC

Frequency: 50 to 60 Hz

Efficiency: 88 to 90%

Heat dissipation: 1536 BTU/hr

Features: Layer 2 hardware forwarding at 520 Gbps or 386.9 mpps

MAC address table entries: 16,000

Low-latency cut-through design that provides predictable, consistent traffic latency regardless of packet size, traffic pattern, or enabled features on 10 Gigabit Ethernet interfaces

Line-rate traffic throughput on all ports

20 fixed 10 Gigabit Ethernet and FCoE Ports (ports 1 to 8 are Gigabit Ethernet and 10 Gigabit Ethernet); additional interfaces through one expansion module

Expansion modules:

- 6-port 10 Gigabit Ethernet and FCoE module

- 4-port Fibre Channel plus 4-port 10 Gigabit Ethernet and FCoE module

- 8-port native 4/2/1-Gbps Fibre Channel expansion module

- 6-port native 8/4/2/1-Gbps Fibre Channel expansion module

Extension through the Cisco Nexus 2000 Series (up to 12 fabric extenders per Cisco Nexus 5000 Series Switch)