Question 1

Is there an website where you can config this network switch?

Accepted Answer

Nope. These are unmanaged switches.

Question 2

How hot does this get when in use?

Accepted Answer

It gets warm but nothing out of the ordinary.  I would be sure to install it so that it gets air circulation.  Don't bury it or put it in an unventilated box.  This is true of almost all electronics.

Question 3

I have a 16 port Linksys Switch right now that I need to replace. It has an Internet input connection from the Modem and 16 Switched outlets that are routed throughout the house to connect to whatever Device that requires Internet connection. I do not see the Internet connection on this NetGear 16 port Switch. What am I missing here?

Accepted Answer

it plugs into port #1. most switches auto select the internet on any port.

Question 4

How would this a $80+ be any different that 2 - 8 port switches for $32?

Accepted Answer

Depends on specs and network design/use. 
This switch may have more mpps, and handle full gigabit loads compared to the 2 smaller ones. There is also some advanced specs for QOS, ect, that the small ones may not have.
 Specs are not too important if you are just using it for a small home network.

Also, Switch hops are not good, and need 2 power outlets.

Keep in mind you will loose  ports if you daisy chain. You will use 3 ports for trunks which gives you 13 usable ports

Question 5

Can I configure Vlan's on this switch??

Accepted Answer

No, this is a switch without any router functions.  There is no setup to this switch.  Just power it up and plug in your Ethernet devices and you get a LAN.  You could use this switch in addition to a router to hook to your VLAN; but this switch is not doing anything special for your VLAN.  This switch is just a switch.  The Auto Uplink Technology that this switch can do has to do with not needing crossover cables.  You can hook a computer or another switch into any port and the Auto Uplink technology will determine which device you plugged in and provide the crossover feature in the case of a switch connected to a switch.

Question 6

does this have a fire wall built in ?

Accepted Answer

No. It's just a layer 2 switch. 
If you want a firewall you need to buy a router of some kind.

Question 7

Where would I buy the mounting brackets for this unit? I have a Netgear FS524 that is 13" on a 24U that came with the mounting brackets that I don't think will work with this unit.

Accepted Answer

The GS116 is meant to be a desktop switch and not rack mounted. You could purchase a rack shelf to put it on or look into the JGS516 which is a rack mountable 16port Gb switch. Although, the JGS516 is almost twice as much due to it being a 'smart' switch instead of an 'unmanaged' switch.

Question 8

Is this the version 2 model - i.e. GS116v2?

Accepted Answer

Yes, I bought mine on 9/17/2013 and they were shipping GS116v2 at that time.

Question 9

I have a Netgear 10/100 16 port switch. But my internet is now 150MB service but I only get about 93MB once it goes through me switch. If I upgrade to the Netgear 10/100/1000 16 port switch, will I be able to get higher internet speeds?

Accepted Answer

First of all, in this response, bps = bits per second, Bps = Bytes per second.

The swicth fabric of the FS116 is 3.2Gbps (~ 320MBps).  Each port is limited to 100Mbps (~10MBps).  The switch fabric is fast enough of serving all16 ports working simultaneously. Your limitation is not the switch fabric but the link speed of each port.

The GS116 switch fabric is 32Gbps. Each port can link up to1000Mbps only if the device can connect at 1000Mbps, and you will gain. Otherwise, the device will connect at 100Mbps and you will not see any difference from the FS116

Question 10

Can this switch be wall mounted. Does it have the mount holes on the bottom?

Accepted Answer

Yes it can. It has the mount holes on the bottom. I believe it even comes with the screws to mount it.

Brand	NETGEAR
Series	ProSafe
Model	GS116
Switch Type	Non rack mountable

Standards	IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-T Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet
Network Management Type	Unmanaged

Primary Ports	16 x auto-sensing 10/100/1000 Mbps Ethernet ports (RJ-45)
Primary Port Speed	10/100/1000Mbps

MAC Address Table	MAC address database: 8,000
Switching Method	Store and Forward
VLAN Support	No
Jumbo Frames	Support up to 16 KB
Buffer Memory	512 Kbytes per port

Protocols	TCP/IP
Security	CE mark, commercial UL listed (UL 1950) C-Tick
LEDs	Link and speed indicators built into each RJ-45 port

NETGEAR 16-Port Gigabit Ethernet Unmanaged Switch | GS116NA

Learn more about the Netgear Inc. GS116

Customer Reviews of the Netgear Inc. GS116

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Temperature	0°C to 50°C (32°F to 122°F)
Humidity	90% Maximum, Non-condensing

Dimensions & Weight
Dimensions	1.06" x 11.22" x 4.06"
Weight	2.38 lbs.

Item#: N82E16833122139