-
Deactivated Item
-
-
Similar Items
Not the product you're looking for? We can make some suggestions to help you decide on a product that fits your needs.
view similar products
-
Manufacturer Warranty
Beyond any applicable Newegg return policy, this item is warranted independently by the product's Manufacturer. Below is a summary provided for convenience only and may not be accurate or current.
Use this link for full details.
- Manufacturer Limited Warranty period (parts): 1 year
- Manufacturer Limited Warranty period (labor): 1 year
Manufacturer Contact Info
Return Policies
This item is covered by Newegg.com's Standard Return Policy.
- Return for refund within: 30 days
- Return for replacement within: 30 days
- Restocking Fee: Yes
|
-
- 5
-
- 50%
- 4
-
- 14%
- 3
-
- 0%
- 2
-
- 9%
- 1
-
- 27%
| Product Rating: |
 
|
| Total Reviews: |
22 |
support
- Pros: it's an update to my previous post
- Cons: try their new support model by downloading the firmware for this product. You will see....
- Other Thoughts: forget it... buy something else
It may break right after warranty expire 1yr
- Pros: It works well and I like the design; however, WPA/2 you will have problem setting up. KISS is the best
- Cons: I bought it for my parents, bad choice since they had signal loss at least once a week - had to reboot. After a little over one year it broke. It seems that the hub part of WET200 failed since everything else seems to work power, lights, etc.
- Other Thoughts: after all that trying to avoid it I had to run the RJ45 cable 50ft from the Comcast router to the parents desktop. It's cheap and last problematic. However, $112.00+tax poorer since I should have done it at the first place.
Mea Culpa, you can not cheat reality including economics 101.
Fails with WEP
- Pros: Unit seems to work well with WPA, havent had any issues getting it connect on my home network.
- Cons: The purpose of this was to use in a business setting where we are restricted to using WEP encryption (older hardware that doesnt support WPA). I tried for quite some time to get this to work with WEP, but could not manage to get it on the network. I was able to configure the device properly, but it never recognizes that the network its connecting to is a security enabled network (as depicted in the site survey section of the web interface). I also had a another network engineer troubleshoot the device on a different WEP network, but he had the same frustrating results. While searching the internet for solutions to the problem, I came across other frustrated folks with the same issue. This seems to be a design flaw that Cisco has yet to address. We will be returning this device to find another that actually functions as described with the technologies we employ.
| Model |
| Brand |
Cisco Small Business |
| Model |
WET200 |
| Spec |
| Standards |
IEEE802.11g
IEEE802.11b
IEEE802.3
IEEE802.3u
IEEE802.3af (Power Over Ethernet)
802.1p (QoS priority)
802.1Q (VLAN)
802.1X (Security Authentication),
802.11i - Ready (Security WPA2)
802.11e - Ready (Wireless QoS) |
| Device Management |
SNMP Version: SNMP Version 1, 2c, 3
Web F/W upgrade: Firmware Upgradable Through Web-Browser
DHCP: DHCP Client |
| Wireless Data Rates |
Up to 54Mbps |
| Security |
WEP/WPA/WPA2: WEP 64bit/128bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
Access Control: MAC-Based ACL between wired and wireless interfaces
802.1X: IEEE 802.1X support |
| WPA/WPA2 |
WPA2 |
| Channels |
11 North America, 13 Most of Europe (ETSI and Japan) |
| Antenna |
External Antenna: 2 (Omni-Directional) SMA detachable
Internal Antenna: None
Antenna Gain in dBi: 1.8 |
| Transmitted Power |
Transmit Power (Adjustable) at Normal Temp Range:
11b: 15.5 ± 1 dBm; 11g: 15 ± 1 dBm |
| Receiver Sensitivity |
11g: 54Mbps@ -72dBm, 11b: 11Mbps@ -85dBm |
| Modulation |
Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM |
| System Requirements |
PC or devices with Ethernet port
802.11b or 802.11g Wireless Access Point
Switch/Router with Power Over Ethernet (PoE) Support Or PoE Injector when used with POE
Web-Based Configuration Java-Enabled Web Browser |
| Interface |
Ethernet Port |
| Ports |
5 x 10/100M |
| Power Input |
12V 0.5A DC input, and IEEE802.3af Compliant PoE |
| Dimensions |
8.1" x 7.7" x 6.7" |
| Weight |
12.17 oz. |
| Temperature |
0°C - 40°C (32°F - 104°F) |
| Humidity |
10% - 85%, Non-Condensing |
| Features |
| Features |
Supports 802.11b and 802.11g wireless connection to Access Point
Easy installation and configuration Web Interface
Supports WEP, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2- ENT wireless encryption
Supports 802.1X, EAP-TLS, PEAP authentication with Radius server
SMA detachable Dipole antennas with 1x2 MIMO to increase coverage
Supports Power over Ethernet (PoE) or external DC power
Supports SNMP and intuitive Web-based interface
Support 802.1Q and portbased VLAN on LAN switch - 1 VLAN bridged over wireless
Support 802.1p, IP TOS, and DSCP based QoS on LAN switch, WMM on wireless Tx
Support Rate Limiting on both wired switch and wireless interface
Support Spanning Tree protocol, port mirroring, and MAC-based ACL |
| Manufacturer Warranty |
| Parts |
1 year limited |
| Labor |
1 year limited |
|
Reviewed By: on 8/6/2009
Tech Level: high - Ownership: more than 1 year
