Pros: Goes on smooth, no bubbles, multiple installations off the one tube.

Cons: None

Other Thoughts: AMD 955 with a gentle 3.8 overclock. STOCK COOLER, 7 hours 95Prime 59 C stable.
AMD 8320 with stock timings, 10 hours 95Prime 57 C

Basically, this thermal paste does what it needs, non-conductive and non-curing. You could not ask for anything else.

Pros: -It's thermal compound
-The syringe it came it was nice and compact.

Cons: -Packaging was amazingly resilient to my entry attempts...

Other Thoughts: A great compound for building your rig.

Pros: Works as advertised! Hooah!

Cons: none!

Other Thoughts: n/a

Pros: Works perfectly and really lowered the temperature of my CPU!
Definitely like it more than Arctic Silver 5

Cons: none

Pros: Easy to apply, works well, great value. This paste reduced my temperature between 2-7 degrees C on my CPU. It was worth the extra money.

Cons: Higher price

Other Thoughts: Yes, it's more expensive than your standard Thermal Compound, but it definitely works better than their standard one.

Pros: It's some of the easiest spreading compound I have used.

Cons: I can't say it's any better than average for heat transfer, but for most people who don't plan on overclocking to the sky a few degrees won't matter anyhow.

The spreader that's included is garbage. Throw it out.

Other Thoughts: I'm hoping this has a good shelf life as I don't use thermal compound often, but when I do, I need it immediately.

Pros: It's not too expensive

It dropped my temps 10C over the stock thermal paste that came with my Hyper 212 Plus

It also dropped my Firepro V7900 temp by 20C (Then again the stock thermal paste was plastered on the GPU).

It comes with a plastic spatula for spreading the paste.

Cons: None

Other Thoughts: I might try another brand just to see what's out there. Most thermal paste is $10-20 a tube.

Pros: Used this on my first build. With a 4770k CPU and EVO hyper 212 heatsink. Went the pea method and did not lift off the heatsink when i applied the paste. CPU temps around 34C at load. This isn't overclocked yet and I think it is a combination of all factors so take it for what it is worth. Plenty left over if i decide to switch out to another CPU cooler.

Cons: None

Pros: Super cool temps.
Low cure time.
Cheap

Cons: None

Other Thoughts: I was a long time Silver user and then hopped over once I tried a sample I got of this from a friend. Very easy interface material to work with.

Pros: spreads easily, no cure, no conductivity, technically cheap, very effective.

Cons: can get sticky if you apply excessive amounts