COOLER MASTER IceFusion 40G RG-ICF-CWR2-GP Thermal Compound

Pros: Good conductvity and very little degradation. I applied about 1/16" of the product a month later with the liquid cooling block on it no increase in heat or change in height of the heatsink off of the motherboard.

Cons: Tricky to learn to use the applicator after years of using a syringe.

Pros: best value I have found on thermal paste yet

Cons: none

Pros: It seems to work fine for consoles. I have used it for over six months and i havent had any returns because of overheating. Its better than some stuff ive seen, the do it yourselfers use to destroy there RROD or YLOD. It is available in a large qty and others arent. I repair hundreds in a month and quality and bulk qty is what i wanted and got from this product.

Cons: none yet

Pros: Does what it is supposed to do, and does it well. Comes with a spreader; is a step up from the business cards I was using prior. Have used it on 3 processors so far, and have barely scratched the surface!

Cons: Spreader can be hard to manipulate, but better than nothing!

Other Thoughts: Only one of the cpus so far were used for gaming, phenom II 550, and it lowered the temps cooler than the stock heat sink paste. Will buy again if I ever run out...

Pros: Used in our IT department in my coorporate office. Needs a better applicator.

Cons: None

Other Thoughts: Will not use this for overcloacking since artic is superior but for our IT department needs is perfect.

Pros: Comes with applicator.
Comes in more than scrawny tube form you can do more than one cpu
Non Curing-means it starts working right away

Cons: Bottle is a little rough to open.

Other Thoughts: First of my 3 Processors to use this was an AMD Athlon X3 460 RANA 3.4 GHZ Triple Core. WEnt on really easily, not to slick not to sticky. At idle this cpu runs at 26C and under load never goes past 32C(stock cpu cooler) No Overclock. Second processor to use this was AMD Athlon II X2 215 and it ran pretty much the same way. 3rd processor was a Phenom that arrived defective so I do not hold it against thermal compund. I usually use Artic Silver but I would gladly use this stuff alot more often due to the performance that it has shown. Such small thing make quite the difference.

Pros: very cheap works better than artic silver paste and a lot cheaper spreads very easy with included mini putty knife.

Cons: none at all

Other Thoughts: ya the paste is thin but it does not run you can tip the container of paste upside down and not a drop dropped my 965 phenom 2 black edition 4.0ghz from 118f cpu temp to 93f and moy cores form 144f to 101f great improvement way to go cool master.

Pros: Cheap and plentiful.

Cons: Not the best, but not the worst either. Thin white paste.

Other Thoughts: What can you say, 40g for 10 bucks. Good to have on hand for generic builds and emergencies. Didn't expect this to be top of the line, but for an average build without overclocking it should get the job done.

Pros: Paste it works

Cons: Stuff Drys Rather Quickly

Other Thoughts: will not buy another

Pros: Came with a spreader, didn't get any thermal compound on my fingers.

Cons: None

Other Thoughts: I am glad I spent $12.99 on 40 grams of tc instead of $9.99 on a 10 gram syringe of tc.