Cooler Master MegaFlow 200 - Sleeve Bearing 200mm Silent Fan for Computer Cases (Black)

Pros: It a nice 200mm size that help replace the Thermaltake 2.0 cooler where it was once mounted since the pump isn't working anymore. So I have a theory to instead get a Enermax Liqtech 120x to fit the rear exhaust 120mm slot (losing the 200mm side fan but I'll figure out something) while getting two 200mm fan for the top to bring a good but better airflow of removing heats out of the system going upward dues to it sheer size difference of my old coolants two 120mm fan coolants without making too much noises. All this is done on my NZXT Phantom but there is a problem, but not much of a issues so far (see con)

Cons: Because it a NZXT Phantom ATX Full Tower, it will not connect all the screw (including side fan slot) because it have to be a NZXT specific brand in order to fits them (and they're expensive). It was a hassle to fit a 200mm size just right to tighten one screw holes which it all it needed dues to being so tightly in there it wasn't going anywhere.

I've brought two of these and one of them only came with 3 screw rather then 4, but that extra screw will be useful for future builds.

I would rated a 5 IF it weren't for not having a proper screw placement for the NZXT Phantom case but I went for better quality products and price range of my own decision.

Other Thoughts: I felt I cheated my way thru with this product to install a non-NZXT fan products but in the end, all the extra heat is moving out of the system with a double 200mm while remaining quiets, I'm all good. I would prefer a clear blade without led but black always good to match my white Phantom Case with blue led lighting up from inside which also help from being too annoying to see on the ceiling

Pros: works like the other fans in my haf x.

Cons: does not come with the required screws to mount in optional top front mount in a coolermaster case.

Pros: Quiet as advertised.
Basic, functional, No-Bling fan. That means no lights or other gaudy features.
Great airflow. Use it as my inlet fan on a Corsair 650D and you can feel the air move at the inlet. I may get another for the outlet as I don't like the blue light on the one there.

Cons: I'll let you know after a year or too- if any. This replaces a stock fan that had the blades separate from the housing. I don't think this will do the same, but ....

Other Thoughts: The case I have has 200mm in and out. It has a 200mm outlet on top (heat rises- whodda thunk?). It supports a 5820K system that has no heat struggles at all. You can feel the airflow move quietly with good volume with this system. Makes for a great overclocking environment that doesn't sound like your house AC unit.

Pros: This fan is quiet and ideal for my HTPC.

Cons: NONE

Other Thoughts: This is the 2nd fan I purchashed for my HAF XB case as I tried putting the top on while the fan was running. NOT a good idea. The 1st one was running fine until I did this.

Pros: This fan is super quiet, and moves A LOT of air!

Cons: None so far.

Pros: Very quiet operation, I actually have to try and hear it. Many will think it doesn't move a lot of air, but it does. the air is spread out, so it wont seem as much as with a smaller fan spinning faster. I have mine installed on a Cooler Master HAF XB EVO lan box. it really is the most perfect fan for the top of that case. The price was very reasonable also.

Cons: cant really think of any negatives. its my favorite fan I've ever purchased.

Other Thoughts: A very silent fan, great air flow, easy install. even came with a molex adapter for hooking it up. I highly recommend this fan.

Pros: love them, no problems none

Cons: none

Pros: I have two Cooler Master HAF 912 cases; each one of them uses this fan on the top as an exhaust fan. Both are extremely quiet with low rpm (700) and move a lot of air. Very pleased with these fans

Cons: none

Pros: Nice and quiet.
Moves air at lower RPMs.

Cons: None

Other Thoughts: I like this, I think Ill move it to the top as exhaust and get a red one for the front intake on my computer.

Pros: -feels like good quality
-looks great

Cons: -Does not fit in Anted 900. No available screw holes on the top panel unless you mod it. The screw holes are directly over the mesh, so it's difficult.