If you are visually impaired and are having difficulty navigating this site, please call our Customer Support line via our toll free number (800) 390-1119.
Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Cons: This thing couldn't be installed on my ATI HD4850. The screws weren't long enough. Also, the heat sinks for the memory chips didn't fit the chips.
Other Thoughts: Despite being advertised as compatible with the ATI HD4850, it isn't. I will never buy a product from this manufacturer again.
Did you find this review helpful?
Thanks for the valuable feedback you provided!
Keeping it Cool
Reviewed By: Hclarkx on 11/3/2009
Tech Level: high - Ownership: 1 week to 1 month
This user purchased this item from Newegg
Pros: Very quiet :)
Cons: Installation is tricky and takes patience.
Other Thoughts: My HIS HD4670 came with the IceQ Turbo fan which is very quiet. On this card it slows to almost noiseless because unlike most cards it idles at 3W and maxes at 40W. Nonetheless, this quiet fan was as audible as my Zalman CPU fan or my Noctua rear case fan so was still a bit of an irritation.
My GPU now idles 3C cooler than before and rarely goes above 40C. My situation is helped by a front case fan that sits only about 4" forward of the Accelero and blows a plume of air directly into the end of the Accelero.
The tricky part is the installation. The small screws have a fiber washer on the back of the board and a plastic spacer between the board and the Accelero. I ended up taping the screws in place, sitting the Accelero on top of them, then sliding the GPU board off the edge of the table exposing one screw, pulling the tape part way off, and starting the screw into heatsink. It took a few tries.
Did you find this review helpful?
Thanks for the valuable feedback you provided!
Does not fit advertised cards
Reviewed By: Christopher on 10/16/2009
Tech Level: somewhat high - Ownership: less than 1 day
This user purchased this item from Newegg
Pros: Lightweight assembly Copper core
Cons: Cheap "thermal tape" use to affix heat-sinks to memory means they will fall off at the slightest movement. Since you need to hold the card upside down the affix the cooler to it they will fall right off and get stuck in the grate of the heat-sink. The screw holes do not fit the placement on an ATI 4850 despite being advertised for this card. ATI 4850 has more memory chips than this cooler is designed to fit, making it obvious that research was not done on these products.
Other Thoughts: I wouldn't suggest you waste your time on this. The annoyance of a loud fan is not half as bad as the annoyances associated with installing this poorly designed cooler.
0 out of 1 people found this review helpful.
Did you?
Thanks for the valuable feedback you provided!
Model
Brand
ARCTIC COOLING
Model
Accelero S2
Spec
Compatibility
ATI X1650 series ATI X1600 series ATI X1550 series ATI X1300 series ATI X1050 series ATI X850 series ATI X800 series ATI X700 series ATI X600 series ATI X550 series ATI X300 series ATI 9 series
NVIDIA GeForce 7600 series NVIDIA GeForce 7300 series NVIDIA GeForce 6600 series NVIDIA GeForce FX 5950 series NVIDIA GeForce FX 5900 series NVIDIA GeForce FX 5700Ultra series NVIDIA GeForce FX 5700 series NVIDIA GeForce FX 5600 series NVIDIA GeForce FX 5500 series NVIDIA GeForce FX 5200 series NVIDIA GeForce4 Ti series NVIDIA GeForce4 MX series