Skip to: | - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.

If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message. - Computer Parts, Laptops, Electronics, HDTVs, Digital Cameras and More!

  • Wish List
  • Feedback
  • Help
Search all
Home > 
Computer Hardware > 
Fans & PC Cooling > 
VGA Cooling > 
Item#: N82E16835186097

ARCTIC Accelero Xtreme IV Enthusiast VGA Cooler-nVidia/AMD, Triple 92mm PWM Fans, Patented Back-Side Heatsink, SLI/CrossFire

  • 300W Cooling Power Brings Out Best in Enthusiast-Grade AMD & nVidia Reference-Layout VGA
  • SLI/CrossFire Compatible
  • Patented Fan holder Minimizes Fan Noise. Extremely Quiet < 23dBA Operation
  • Pin It
  • Email this page
ICON Loading...
Accelero Xtreme IV

Unmatched Cooling Performance

Accelero Xtreme IV

With cooling power at 300 Watts, the Accelero Xtreme IV offers an unmatched cooling performance. The three 92mm PWM fans and the pre-applied MX-4 thermal compound ensure efficient cooling, even under overclocking.

Accelero Xtreme IV

Backside Cooler for Highest Efficiency

Accelero Xtreme IV

ARCTIC has developed and patented a back side cooler for unparalleled VRM and RAM cooling performance. It offers efficient cooling for RAM and voltage regulators and thus does not just allow higher clock rates but mainly increases the graphics card's service life.

Accelero Xtreme IV

Installation Without Thermal Glue

Up to now the meticulous work of attaching different heatsinks with thermal glue was necessary. Thanks to the innovative rear plate, this is a thing of the past. Without any thermal glue the graphics card can be returned to its original condition any time without leaving marks or residue.

Accelero Xtreme IV

Accelero Xtreme IV

Virtually Silent

Its low noise impeller and patented fan holder ensures the fan is ultra-quiet even under full load. Thanks to the PWM control, the fan speed adjusts according to the GPU temperature and thus the noise level remains at an absolute minimum.

Accelero Xtreme IV


Accelero Xtreme IV features a versatile, problem free mounting system that allows this cooler to accommodate a wide range of graphics cards.

New Fan Controller

An improved fan controller and the use of additional filters guarantee a smooth operation with both NVIDIA and AMD graphics cards. Through software, the temperature-fan speed curve can be adjusted. No matter whether you are a hardcore-gamer or a silent enthusiast, you get the temperature and noise level exactly where you want it to be.

Accelero Xtreme IV

Learn more about the ARCTIC COOLING DCACO-V800001-GBA01

Quick Info


  • Limited Warranty period (parts): 6 years
  • Limited Warranty period (labor): 6 years

Customer Reviews of the ARCTIC COOLING DCACO-V800001-GBA01

Do you own this product? Write a Review

ICON Loading...

Filter Results

  • mark d.
  • 2/11/2015 5:30:20 AM
  • Tech Level: Somewhat High
  • Ownership: 1 day to 1 week
  • Verified Owner

5 out of 5 eggsMust Buy for R9 290

Pros: This thing is COOL! It brought my temps from 190F+ to 140F. This is a must buy!

Cons: Could be some better instructions.

Did you find this review helpful? Yes No

  • Clay S.
  • 2/3/2015 6:20:03 PM
  • Tech Level: Average
  • Ownership: less than 1 day
  • Verified Owner

1 out of 5 eggs700$ later

Pros: Silent and cool

Cons: It destroyed my 780Ti Card
cooked it
So beware if you buy it the instructions are terrible
there was remnants of thermal paste all over when i opened it up

0 out of 2 people found this review helpful. Did you? Yes No

  • Thomas Q.
  • 8/1/2014 6:33:00 PM
  • Tech Level: Somewhat High
  • Ownership: less than 1 day
  • Verified Owner

4 out of 5 eggsIt works.

Pros: I installed the Arctic Accelero Extreme IV on a Visiontek R9 290x with revised heatsink, and it works great.

Essentially if you have a R9 290x with a "2nd gen heatsink" like on my card, there will already be heatsinks on VRM chips and Ram and a passive cooling backplate from the factory. This allows you to skip installing the backplate from Arctic, and the factory installed heatsinks will work in with the Arctic Accelero.

Load temps in low 60's with fan set at 75%. I would strongly advise manually adjusting the fan speed to the highest percentage your ears will allow. 100% is a little noisy - 60% is quiet, and somewhere in between works great when your gaming with sound to cover the fan noise.

Cons: One of the gpu mount screws stripped, but still worked enough to mount cooler.

Metal bracket surrounding the coolers "cold plate" the part that touches the gpu, flexes under very little screw tension.

Essentially I think the cooler and screws are made from junk metal. All different grades of steel are available, and it seems Arctic has saved some pennies here. Really not a surprise, and doesn't present much of a problem, but the cooler might not fare well from multiple installations/ switching cards down the road.

Other Thoughts: If you have a reference cooled R9 290x, pick up some heatsinks for the VRM and Ram chips, for a little extra headroom. Cooler will probably work without them, but overclocking the Ram etc. could present problems.

3 out of 3 people found this review helpful. Did you? Yes No

  • 7/11/2014 9:18:32 AM
  • Tech Level: High
  • Ownership: 1 month to 1 year
  • Verified Owner

3 out of 5 eggs

Pros: easy installation on card

Cons: does fit well in macpro over width about half a inch

0 out of 6 people found this review helpful. Did you? Yes No

  • David S.
  • 7/8/2014 2:30:03 PM
  • Tech Level: High
  • Ownership: 1 day to 1 week
  • Verified Owner

5 out of 5 eggs

Pros: Installed on a stock R9 290x after getting tired of the wind tunnel cooler that it comes with.

After playing Crysis 3 on High for 30 minutes, the core and vrm temps hovered around 65c, with the fans on max.

Even on max the fan is barely audible if you're playing a game or listening to music.

Cons: Took a couple hours to figure out how to install the cooler, while triple checking to make sure that everything was done right.

Other Thoughts: Use a fan control software.

During my first run with this the vrms were hitting borderline uncomfortable temperatures (107c~) as a direct result of the fans not going above 25% because the stock card doesn't bring its own fan on until its core hits a rather high temperature (which this cooler was keeping well below that, even with the fans on lowest).

Once I realized this and set up my own profile for the fans this worked absolutely flawlessly.

3 out of 3 people found this review helpful. Did you? Yes No

  • Frederick M.
  • 6/28/2014 2:24:10 PM
  • Tech Level: High
  • Ownership: 1 month to 1 year

3 out of 5 eggsProbably best VGA cooler around

Pros: The temperatures are amazing.

Cons: Biggest con is that they removed RAM and VRM heat sinks.. like what were they thinking?

Remove that useless "back plate" and gives us back the heat sinks which actually made a difference in temperature.

People are getting amazing temperatures on the GPU all over the net but the VRM's are hitting 105-110 degrees C for some people.. Come on Arctic.. Scrap the backplates and put the heatsinks back.

I am who tested this and what were they thinking?

Was this even tested at all?

People should stick to the ARCTIC Accelero Xtreme III until they fix this. They are compatible with R9 290/X anyways.

1 out of 1 people found this review helpful. Did you? Yes No

  • Kuo L.
  • 6/26/2014 12:59:35 PM
  • Tech Level: High
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsCOOL stuff!

Pros: - Works extremely well cooling down 290X
- Almost silent, barely any sound at all
- Great customer service, very responsive

Cons: - Bulky, need metal to get rid of the heat perhaps

Other Thoughts: Read a lot comments from both sides before ordering. Haven’t seen better alternative, stock cooler can’t cut it. Saw lots of funny comments all over though.

Followed instructions, mounted on 290X. Agreed with some, not easy one to mount, took time. But 290X demanded attention. Left room for airflow, set fans @ 100% and benchmarking 72 hours straight. Temps fell off the cliff compare to stock. Cooler didn’t budge.

Gaming heavily for last 3 weeks, two opponents on 290X but with stock dropped off in smoke, kicked some serious rearends. 290X worked great, temps under control. Again, Xtreme IV didn’t budge. Don’t mind fans @ 100%, better be careful than sorry, very quiet anyway.

Needed extra stuff during installation, lost them, my bad. Emailed Arctic and got what I asked for in days by mail. Cool service. Much better than what I can say about some others.

Rid stock cooling before taking 290X into battle. Good to go here with Xtreme IV

2 out of 2 people found this review helpful. Did you? Yes No

  • Kuo L.
  • 6/25/2014 12:43:08 PM
  • Tech Level: High
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsGood quality product, great result!

Pros: It cools the beastly R9 290 as advertised
Handled very well under various load conditions
Definitely earned bonus points from me with its quietness
Good concept of having a one-piece passive heatsink covering the length of the card
Thermal paste was already in place, saving the guess work, non-capacitive, too!
Super long factory warranty gives me less worries

Cons: Certainly looks very intimidating when laying all the accessories out on the table
It’s not for someone lacks of patience to play with
Rather heavy to handle and bulky to install, taken up more space than preferred

Other Thoughts: This is a heavy-duty (literally!) but solidly-built cooler with aggressive cooling features both in front and at the back (first I’ve seen). This combination is nonetheless surprisingly effective in keeping the demanding R9 290 under control. Front cooling components include an enormous heatsink with 5 copper heatpipes and a single contact point with the GPU. Back cooling component consists of a solid piece of aluminum heatsink plate extends from end to end of the 290.

Installation in theory was pretty simple, align the holds, tightened the screws and there you go. In reality the process was a lengthy one and really testing my control over my anxiety. A quick tip: a sharp cutting blade would be very helpful when dealing with the thermal pads. Everyone all has a horror story about problems and I had to do trial-and-error a few times just to get it right. Hey, we all want to see our mods up and running in minutes, but that ain’t happening, so just “get a grip!”

I like the fact the thermal paste in place was non-capacitive because the static built-up and a little over-zealous portion of paste can be disastrous. While I wish the finished assembly could be skinnier but I get that something has got to give somewhere. That reality adjustment is always the tough part when the expectation strayed far off the course.

I had my doubt leaving the RAMs without heatsinks but after running the mod for over a month now and several hard fought tournaments, I did not see any temperature issue worth mentioning and believe me, I checked with my infrared thermometer often to be sure the temperature is stable and within the range I feel comfortable with. I am a firm believer of putting best-matched components in my mod so I can get the most out of them. Fancy stuff does not always work well together.

As far as my mod goes, I’m happy with the performance now comparing to when I had the stock cooler on my R9 290. It does what it said it would do for me and I’m happy with that.

1 out of 1 people found this review helpful. Did you? Yes No

  • Anonymous
  • 6/10/2014 7:16:55 AM
  • Tech Level: High
  • Ownership: 1 day to 1 week
  • Verified Owner

1 out of 5 eggsAsus Thermal Armored Motherboards AVOID!

Pros: Good quality product with everything you need
Instructions are straight forward

Cons: Very Heavy
Very long
Cooler sticks about 2-3 inches past the card
4 slot card

Other Thoughts: Installed into Corsair 500R
Asus Sabertooth Z77
Reference AMD Sapphire 290

I've spent a very long time prepping my video card to install this cooler. I even purchased Zalman VRM heatsinks to help keep the VRMS cool.

This Cooler design DOES NOT fit on Asus Thermal Armored Motherboards. I clamps holding the Patented back heat sink hit's the Thermal Armor on Sabertooth Z77 motherboard. The GPU never gets fully slotted into the PCIE. I didn't not want to remove those three clamps holding the heatsink without taking off my thernal armor for this.

The product is meant to compress the thermal pads onto the rear of the GPU, With only three clamps the rear end of the heatsink lifts up; relieving compression of the thermal pads. The product was not designed to work this way.

I decided to remove this cooler and sent it back to newegg but I am VERY disappointed that I'm beling charged for re-stocking when the description clearly NEVER mentioned about certain Motherboards having clearance issue's.

1 out of 1 people found this review helpful. Did you? Yes No

  • Lazaro C.
  • 6/6/2014 5:18:10 PM
  • Tech Level: High
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsYou get what you pay for!

Pros: Got sicked and tired of stock cooler on my 7870 GHz. Xtreme 4 lowered temperature by more than 20C idle and almost 30C at full load with so little noise I'd barely hear it running at all! Price is decent for what it does. Loved the warranty but hopefully never have to use it. Highly recommended must-have for any high performance GPU!

Cons: None so far

Did you find this review helpful? Yes No

Compare Offers from All Sellers

Seller Name & Rating Offer Details  
ICON Loading...

Send It As A Gift!

gift services details

More Buying Options

Are you an E-Blast Insider? Subscribe Newegg e-Blast
Shop without retyping payment details. Secure shopping made faster.
Check out with PayPal.

Home > 
Computer Hardware > 
Fans & PC Cooling > 
VGA Cooling > 
Item#: N82E16835186097
Shop by Region: United States | Canada | China | Taiwan
VeriSign Click for the BBB Business Review of this Computers - Supplies & Parts in Whittier CAThis site protected by Trustwave's Trusted Commerce program Inc500
Policy & Agreement | Privacy Policy  © 2000-2015 Newegg Inc.  All rights reserved.
If the Adobe Reader does not appear when you click on a link for a PDF file, you can download Adobe Reader from the Adobe web site.