* Free Shipping is not available to AK, HI and PR.
Special Offers-
No interest for up to 12 months. Minimum purchase required.
Subject to credit approval. Details
-
No Payments for up to 6 months. Minimum purchase required.
Subject to credit approval. Details
Similar Items
Not the product you're looking for? We can make some suggestions to help you decide on a product that fits your needs.
view similar products
-
Manufacturer Contact Info
Return Policies
This item is covered by Newegg.com's Standard Return Policy.
- Return for refund within: 30 days
- Return for replacement within: 30 days
- Restocking Fee: Yes
|
-
- 5
-
- 66%
- 4
-
- 22%
- 3
-
- 5%
- 2
-
- 2%
- 1
-
- 5%
| Product Rating: |
 
|
| Total Reviews: |
467 |
So far it's good
- Pros: So far this has performed beautifully. Fan is operating at proper speeds and at my slight OC the temps have dropped about 17 degrees Celsius. Now I'm up to 1.48 vCore and my max temps are ~45 - 46 with ambient temperature at 20.
- Cons: I haven't tried to get a rebate yet, so we'll see how that process goes. The fan speed controller won't fit through the slots in the back of my case, but I wasn't really planning on using it anyway.
- Other Thoughts: This is a HUGE heat sink. It does take a lot of pressure to snap the heat sink onto my AM3 mobo, but I suspect that most of the pressure is actually on the clips on the heat sink, as you basically have to bend the arms that the clips are attached to in order to get the clips over the brackets on the mobo. Also, for those of you who state it doesn't cool well, use more thermal grease. If you notice in the instructions, it says to use double the normal amount of thermal grease due to the "unique base design" however, I think it's because the base isn't smooth because of the way the copper heat rails simply have an aluminum base soldered between the tubes instead of having a truly flat contact pad, you end up with peaks that don't make good contact.
My system:
Antec 900 Case
Antec TPQ 850W PSU
Asus Crosshair Formula III
AMD Phenom II X4 Deneb 3.4Ghz (OC'd to 3.8Ghz on stock cooler)
Mushkin 996657 (OC'd to 1633 @ 7-7-7-20-1T) 2x2GB
Sapphire Radeon HD 5870
2x WD Raptor 1x WD Veloc
Decent for money
- Pros: Does a good job of keeping my overclocked Phenom II X2 550BE (all cored unlocked) cool. Relatively easy to install. Comes with good thermal compound.
- Cons: Could have come with a PWM fan. Can't mount second fan for a push/pull config.
- Other Thoughts: Bought this because the Cooler Master Hyper 212+ was out of stock. Only regret not being able to add a second fan without making a bracket.
If you have a motherboard that can control a PWM fan, do yourself a favor and pick one up.
Great heat sink
- Pros: Nice RPM rate, stays cool?
- Cons: A bit over-sized, would be nicer if brackets were a bit lower.
- Other Thoughts: This thing is fairly big. If you have a moderate sized gaming case, with a side-fan on the cover, you may have difficulties in shutting it. My side fan is about 1-1 1/2 inches thick and makes contact with the top of the heat sink, so I have to leave the back of the cover open just a bit, to avoid the side fan being pushed against the heat sink. Also, the brackets are really high up when you set this thing on your processor, so you REALLY have to push hard down to clip it in. Bit hesitant at first since i was installing my new quad, but I managed and it's working nice with it.
| Model |
| Brand |
Sunbeam |
| Model |
CR-CCTF |
| Spec |
| Type |
Fan & Heatsinks |
| Fan Size |
120mm |
| Compatibility |
Socket 754 / 939 / 940 / AM2 / LGA 775 |
| Bearing Type |
Magnetic Fluid Dynamic Bearing |
| RPM |
1000 - 2000 ±10% RPM |
| Air Flow |
90.65 CFM (Max) |
| Noise Level |
16 - 20 ±10% dBA |
| Physical Spec |
| Weight |
590g |
| Features |
| Features |
TX-2 Thermal Paste & Fan Controller included |
| Package Contents |
| Package Contents |
CPU Cooler
TX-2 Thermal Paste
Fan Controller |
Introduction
Step up from your stock cooling fan and heatsink to the Sunbeam CR-CCTF. Supporting both Intel (LGA 775) and AMD (socket 754, 939, AM2) platforms, it will take care of your high-end processors. It has 4 large exposed 8mm pure copper heatpipes at its base which directly contact the CPU for highly efficient thermal conduction, plus the array of hi-grade aluminum fins and silent 120mm fan provide the cooling performance you need to keep your desktop running at its peak.
Easily install the included fan speed control into your case's PCI slot, and you can control the cooling performance and fan noise level anytime. It doesn't matter how much heat your CPU generate, you'll have trouble preventing it from getting frosty!
Highlights
 |
Superior Heat Dissipation and Cooling Performance
Four U-type heatpipes integrated with Core-Contact technology and high-density aluminum fins maximize heat transfer and dissipation. Plus a huge 120mm Magnetic Fluid Dynamic bearing fan runs efficiently to deliver unparalleled cooling performance.
|
 |
PCI Fan Control Bracket
The included PCI fan control bracket features a manual fan-speed control dial for convenient adjustments of fan speeds.
|
Quick Specs
| Brand | Sunbeam |
| Air Flow | >80 CFM |
| Bearing Type | MFDB |
| Compatibility | Socket 754 / 939 / 940 / AM2 / LGA 775 |
| Noise Level | Variable |
| RPM | Variable |
| Type | Fan & Heatsinks |
| Weight | More than 450g |
| Fan Size | 120mm |
|
|
Reviewed By: DKHman26 on 2/9/2010
Tech Level: high - Ownership: less than 1 day
