ENERMAX T.B. Vegas Duo UCTVD14A 140mm 2 Color (Blue/Red) LED Case Fan with Changeable Modes

Pros: Ignore my last review. For some reason one of my fan controller ports would not allow the blue lights or fan speed to be changed manually. Switched it to another fan controller port and the manual lights and fan speed now works. Does as advertised. Pushes a lot of air and helps to keep everything cool.

Cons: N/A

Pros: None at this time.

Cons: Cannot achieve fan speed higher than 975 RPM (with the 10% variable I should at least be getting 1350 RPM). Blue LED lights do not function.

Other Thoughts: Will update review upon receipt of new fan.

Pros: Barely noticeable noise. High air flow makes efficient cooling. Many LED color choices.

Cons: LED colors does not match descriptions.

Other Thoughts: Ideal for side panel where fan noise can be most pronounced.

Pros: This 140mm fan does deliver and it's way brighter than enermax TB silence series and it's dual color . The speed controller for the fan is super small et tucks away easily in your case right beside the button for changing the led display. Only time will tell if the bearings will stay silent . highly recommended fan . good Job Enermax

Cons: no cons for the moment .. except newegg shipping prices for small items is a little high but at least it came super fast ..

Other Thoughts: I will only buy enermax fans from now on .. They are really that good ..

Pros: They look freakin awesome. Love the vegas selection where it cycles through colors and propeller modes. has a manual speed twist nob and the button to change modes. Got this to match the two 120 vegas fans I had and I love how they make my computer work, kinda hypnotizing. Also really quiet with the rubber "screws"

Cons: like the 120mm similar fan it only looks really good as an intake, if you turn it around all you see are the leds on the side, you don't have the focused reflectors so it doesn't look as nice.

the rubber "screws" are really hard to get in, had to use some gun oil to lightly spread on one side and pull through, but they keep the vibration down so far.

really freakin bright but can be turned off by the press of a button but you have to cycle back through to your favorite setting after you long hold them off.

Other Thoughts: the cons are not worth taking off an egg cause they are just good for someone buying these to know but don't detract from my enjoyment of the great led lights and vibrant colors and how quiet they actually are. You get what you are paying for.

Pros: moves alot of air for the speed at which you can set them at. works well and very quietly almost silently on low speed. moves alot and i mean ALOT of air on high speed. this fan also comes with alot of useful accessories like 4 pin to 3 pin, very useful rubber grommets. and some sticky foam as extra sounds isolation. overall best fan i've purchased, dare i say better than that of a noctua fan equivilant.

Cons: only things wrong with this fan is that if you plug it into certain types of fan controllers like my NZXT sentry, it tends to send the fan on a rampage of flashing all of the different settings and makes it impossible to control the color. not the fans fault so im not deducting a egg, but just be warned, you may have to plug this directly into your motherboard or use the included adapters as such.

Pros: Eye Candy!!
Lots of cool settings
very quiet unless turned past around 75%

Cons: Zero

Pros: Bright LEDs. Lots of color settings and patterns. Move tons of air.

Cons: Can't use these with a fan controller because the LEDs will go out as soon as you adjust the speed. The LEDs don't really match the other red and blue LEDs in my case. LEDs are SUPER bright which could be considered a negative to some. Fans are pretty loud on full setting but also move a ton of air too.

Other Thoughts: Pretty darn cool.

Pros: Quiet on low, move lots of air on high and of course you can hear the air moving then. Lights work well and look great. Many different settings for the lights. Has speed adjustment knob and toggle button for light modes.

Cons: The attached button and knob could have six to ten inches or so more cable to them, limits mounting possibilities of these controls. The cables could also have quick disconnect spots for if you have to take apart rig once switches are mounted down.

Other Thoughts: these will not work with a fan controller because they have one built in.

Pros: Working well in my InWin case (Dragon). Used with one other and a 120 mm enermax. Good cooling rarely get above 30 degrees in case. Very quiet. Well protected from interior. Dropped once, onto wood floor, from about 3-4 feet, and still worked without noise, damage, or problems- Thank goodness! Colors are fun. Fans cool well on low settings. Connectors and setting selectors have plenty of reach. Would definitely buy again.

Cons: Packaging is a little annoying. You will have to use your head and hands as there no instructions. Rubber gadget fasteners work well after you figure out how to use and place- they are tougher than they look. I found it easier to use long ends in fan.

Other Thoughts: I found that they did not match the preset grommets in my InWin case and almost sent them back. Who do I blame for that? However the rubber fasteners easily went through the case perforations and I mounted them that way. Only had to remove one grommet as it touched a fan and made a noise- Other than that no problems- worked perfectly. Would buy again. Feel they should include screws and grommets for people who can't place them with fasteners.