Skip Image Gallery

XIGMATEK FCB (Fluid Circulative Bearing) Cooling System Crystal Series CLF-F1452 140mm Red LED Case Fan PSU Molex Adapter/extender included

(83) |

Write a Review

140mm
1000 RPM 60.46 CFM
Fluid Circulative Bearing
<16 dBA

The new Xigmatek CLF Crystal Series of 140mm system fans continues the company's innovative design focus to provide advanced features and performance while maintaining excellent value to the end user. CLF Series is created with attention and detail, and not only does it look prestige from every angle it is manufactured with impeccable performance.

The CLF Series fan comes standard with quad LEDs incorporated with transparent frame and blades insuring your case fan to be the center of attraction.

The CLF features a high quality "Fluid Circulative Bearing" which is tested to increase its lifespan by 50%. The Fluid Circulative Bearing uses a remarkable re-circulative fluid method which enables the bearing to rotate at a high and stable revs, reaching rotations up to 1500 RPM. Unlike average bearings on the market, FCB will cancel out 98.9% friction which means in practical everyday usage this ultimately produces a near silent atmosphere (<20 dBA).

Product Name	CLF Bearing
Fan	Dimension	140(W) x 140(H) x 25(D) mm
	Voltage Rating	12 V
	Starting Voltage	6 V
	Speed	1000 R.P.M.
	Bearing Type	FCB Fluid Circulative Bearing
	Air Flow	63.567 CFM
	Air Pressure	1.111 mmH2O
Life Expectance	50,000 hrs
Noise Level	<16 dBA
Available color	4 red LED
Connector	3 Pin
Accessory	4 pin adaptor Screws*4

Reliable and Outstanding Performance The 140mm fan’s optimized blade and long-life rifle bearing design creates superior cooling performance with up to 60.46 CFM of airflow while reducing the noise and power consumption.
Whisper-quiet The XIGMATEK LED Fan Crystal series runs at an ultra-low noise level (<16 dBA) to deliver a quiet computer environment.

Learn more about the XIGMATEK CLF-F1452

Model

Brand: XIGMATEK

Series: Cooling System Crystal Series

Model: CLF-F1452

Spec

Type: Case Fan

Compatibility: Case

Fan Size: 140mm

Bearing Type: Fluid Circulative Bearing

RPM: 1000 RPM

Air Flow: 60.46 CFM

Noise Level: <16 dBA

Power Connector: 3 Pin

Color: Transparent

LED: Red

Physical Spec

Dimensions: 140 x 140 x 25 mm

Features

Features: Performing max. Air flow and mini. amount of noise
Less power consumption.
Optimal static pressure and torque.
Reduce noise and power consumption.
Quad LEDs and transparent frame and blades
Reliable and outstanding performance

Manufacturer Warranty

Parts: 1 year limited

Labor: 1 year limited

Quick Info

Warranty

Limited Warranty period (parts): 1 year
Limited Warranty period (labor): 1 year

Manufacturer Contact Info

Customer Reviews of the XIGMATEK CLF-F1452

Do you own this product? Write a Review

Filter Results Last 2 Weeks (0) Last 6 Months (4) All Reviews (83) 80% (66) 12% (10) 4% (3) 1% (1) 4% (3) Verified Owners Video Reviews Mfr. Responses keyword Go page SubmitTopPaginationForm of 9 previousTopPaginationForm\| nextTopPaginationForm
N/A 4/27/2013 11:45:08 PM Tech Level: 3/5 Ownership: 4/5 Verified Owner	Rating: 5/5Quiet, cool, and attractive Pros: It's quiet, and moves enough air to do the job any good fan should. It looks really cool. It's LED's are not too bright, and looks like the coals of a dying camp fire on a dark night. Cons: None. Other Thoughts: I wouldn't place it in direct view, but behind an air filter, or buried in the top or bottom of your case, it looks hellishly like cold fire. Did you find this review helpful? Thanks for the valuable feedback you provided!
LRMTX 3/9/2013 3:25:11 PM Tech Level: 3/5 Ownership: 2/5 Verified Owner	Rating: 5/5Xigmatek FCB CLF-F1452 Pros: Huge, bought 2 for my Midguard II case. Installed on top. Super quiet, awesome cooling. Nice finish and bright LED's. Cons: None. Did you find this review helpful? Thanks for the valuable feedback you provided!
JesusLovesTechToo 2/20/2013 7:08:05 AM Tech Level: 4/5 Ownership: 3/5 Verified Owner	Rating: 5/5I'm getting another. Pros: Great color, airflow, specs. Cons: Installation? Other Thoughts: Make sure you determine the direction of airflow, mine was mismarked or misread :D And installing and reinstalling is a pain. Did you find this review helpful? Thanks for the valuable feedback you provided!
N/A 2/2/2013 10:16:13 AM Tech Level: 5/5 Ownership: 3/5 Verified Owner	Rating: 5/5 Pros: Nice red color, quiet, sleeved cable. Cons: As with most fans, the screw holes aren't tapped. I tried using some screws I had already in this because they were black but couldn't screw them in without tapping the hole. However, the included screws are very high quality and will screw right in no problems. Other Thoughts: Not much to say. It's a clear 140mm fan with red LEDs. If that's what you are looking for, this is for you. Did you find this review helpful? Thanks for the valuable feedback you provided!
N/A 10/11/2012 6:47:55 PM Tech Level: 4/5 Ownership: 2/5 Verified Owner	Rating: 4/5not a fan of this one Pros: moves good amount of air, quiet Cons: does'nt run on lower voltage Did you find this review helpful? Thanks for the valuable feedback you provided!
N/A 10/5/2012 6:13:13 PM Tech Level: 3/5 Ownership: 4/5 Verified Owner	Rating: 3/5Does what it should and glows well! Just have a drill of some sort... Pros: Works completely fine, and it GLOWS. The LED's are very nice, lights up my whole system! Cons: I had a problem with screwing it in... The holes were fresh and not pre-drilled which threw me off. I attempted to hand screw them in, but ended up getting out the power drill. Other than that everything works and stays cool! Other Thoughts: My system components never reach above 40-50C, this thing really draws air! 1 out of 3 people found this review helpful. Did you? Thanks for the valuable feedback you provided!
Matty 10/3/2012 12:46:07 PM Tech Level: 4/5 Ownership: 5/5 Verified Owner	Rating: 5/518 months and no problems Pros: Still quiet and working well Cons: none Did you find this review helpful? Thanks for the valuable feedback you provided!
grdSavant 9/13/2012 12:02:46 PM Tech Level: 5/5 Ownership: 3/5 Verified Owner	Rating: 5/5Cute Red Fan Pros: I like it, quiet and quite controllable. Just right for the bottom of my case, blowing in. Cons: none Did you find this review helpful? Thanks for the valuable feedback you provided!
johnnydc 8/23/2012 3:31:23 PM Tech Level: 5/5 Ownership: 2/5 Verified Owner	Rating: 5/5Moves air, feels sturdy, looks good Pros: It moves a decent amount of air and is pretty quiet. The blades seem well-balanced and the bearings are smooth. I have 3 of these in my machine (2 exhaust and 1 intake) and it's not noisy at all. Moves a good volume of air too, enough to keep a moderate negative pressure inside the case at the 2:1 ratio. The red LEDs are subtle and not too bright. They're also actually red, not orange/red or yellow/red -- a rich, deep red that is effective without being distracting. Build quality is pretty good for clear plastic -- they don't feel like they're going to shatter if you torque down the screws or drop it on the floor. Cons: A little difficult to get the screws tapped in the first time. I recommend pre-tapping the screws prior to installing them in a case. Other Thoughts: I just bought two more for my older build. 2 out of 2 people found this review helpful. Did you? Thanks for the valuable feedback you provided!
PKBowen 8/21/2012 11:00:16 AM Tech Level: 4/5 Ownership: 3/5 Verified Owner	Rating: 5/5Works, looks nice Pros: These Xigmatek Crystal Series fans are always great for the price. They move a fair amount of air and are good ventilation fans because of their moderate flow rate. The red color is great; it's not washed out (pink), but a very vibrant red that looks great with my NZXT Hades case. Cons: Screws that come with the fans are cheap and are easily damaged when tightening them down. (Somebody messed up the heat treatment, methinks.) Other Thoughts: Overall, these are great, good-looking case fans that I can easily give a whole 5 eggs. Did you find this review helpful? Thanks for the valuable feedback you provided!
page SubmitBottomPaginationForm of 9 previousBottomPaginationForm\| nextBottomPaginationForm