Skip to: | | - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.

If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message. - Computer Parts, Laptops, Electronics, HDTVs, Digital Cameras and More!

PremierTry Message.
Home > 
Components > 
Fans & PC Cooling > 
VGA Cooling > 
GELID Solutions Ltd. > 
Item#: N82E16835426026

GELID Solutions GC-VGA02-01 1 Ball, 1 Sleeve VGA Cooler

  • 2000 (+/- 10%) RPM
  • 67.14 CFM
  • Aluminum & Copper

ICON Loading...
  • Specifications
  • Warranty & Returns
  • Reviews

Learn more about the GELID Solutions Ltd. GC-VGA02-01

Warranty, Returns, And Additional Information
  • Warranty
  • Limited Warranty period (parts): 1 year
  • Limited Warranty period (labor): 1 year
  • Read full details

Customer Reviews of the GELID Solutions Ltd. GC-VGA02-01

Do you own this product? Write a Review

ICON Loading...

Filter Results

  • Joshua M.
  • 12/11/2015 4:09:34 PM
  • Ownership: more than 1 year
  • Verified Owner

5 out of 5 eggsGelid / Cool and Quiet

Pros: Very Mild hum I think. My 120mm case fans are louder even under full load. Never hits temps beyond 80c so never throttles like it did before. Well worth the cost if you have a reference card of any sort. Installed on a an three year old 290x and is still going strong a year after installing cooler. Clocked 1070mhz and mem at 1300mhz.

Cons: Had to order seperate revision for some minor heat sink adjustments for the 290x and 290. Bit tedious on install. Fairwell warranty.

Other Thoughts: Quieter then any other card manufacturing cooling solution, I have run into. Not much to think about got a card it is too loud here is what you will need to keep from going bonkers.

Did you find this review helpful? Yes No

  • Mark F.
  • 6/3/2015 7:21:37 PM
  • Ownership: 1 week to 1 month
  • Verified Owner

5 out of 5 eggsR9 290

Pros: Great Temps after installing

Cons: Instructions are difficult to follow
Includes JUST enough thermal tape to get the job done, don't screw it up lol
Had to buy the R9 290 add-on kit for all VRM/RAM chips to fit properly
Pretty clostly R9 290 and 290X users including the required additional purchase mentioned by other reviewers, that heatsink kit is too expensive for what you get..

Other Thoughts: All in all with the kit I had to buy extra, I think that puts this cooler in a price range I wasn't really comfortable with, I wish I had gotten something aside from the reference 290 card. I thought I could handle the noise since my last HD6870s weren't loud at all.. but wow was that thing hot and noisy.

1 out of 1 people found this review helpful. Did you? Yes No

  • Robert F.
  • 5/19/2015 8:19:20 PM
  • Ownership: 1 week to 1 month
  • Verified Owner

4 out of 5 eggsgreat product

Pros: It brought my R9 290 from 94c at full load to 57-60c at full load. huge difference. You need a dremel to mod the vram heat sink to fit, I bought that extra kit that people here recommend for another 18 bucks but bought another Gelid cooler for another R9 290 I have and it only takes 5 minutes with the dremel and you're set.

Cons: People complained about the heat sinks falling off, take some alcohol and a coffee filter, clean both the ram chips and the NEW heat sinks well and you should have no problem with them sticking and staying. Have a pair of tweezers near by for removing the plastic covering. My only con which I know is the same for all after market coolers is the size, there is NO reason this needs to be a 3 slot cooler, they could have made it easily into a two slot if they didn't extend the cooler so much from the main chip and make the fins a little smaller.

Did you find this review helpful? Yes No

  • Jon O.
  • 2/3/2015 10:56:27 AM
  • Ownership: 1 day to 1 week
  • Verified Owner

3 out of 5 eggsDoes the job BUT...

Pros: Keeps my r9 290 under 35c, not bad for a card known to be blazing hot.

Cons: Thermal tape wouldn't hold the heatsinks on very well while i was applying them to the RAM chips. The long heatsink bar isn't long enough to cover their assigned point and work through the mounting holes on a reference R9 290, I ended up having to tie mine on with string.

Other Thoughts: It does the job but given how some things don't fit my reference R9 290 I wouldn't recommend buying this specifically for a reference card. I imagine it would work great on others, if everything fit and you can get the thermal tape to stick.

1 out of 1 people found this review helpful. Did you? Yes No

  • James A.
  • 11/5/2014 10:45:58 AM
  • Ownership: 1 week to 1 month
  • Verified Owner

5 out of 5 eggsGreat Cooling, bit heavy.

Pros: This cooler works great, which. I installed it on an EVGA GTX680 4GB. When running a benchmark (EVGA OC Scanner X) with the stock card I reached up to 72'C before I turned it off, and an idle temp of about 32'C.

After installing the VGA cooler and re-benched, I didn't go above 40'C, with the idle staying around 22'C-24'C. So overall great improvement.

Cons: These fans are a bit heavy for my PCB and causes it to sag a bit, since mine doesn't have a spine. There nothing to interfere with performance though, just more of an eyesore. Also, I didn't care for the instructions, so I tried to compare them with some of the tutorials I've found. Also, I couldn't find a diagram my actual PCB anywhere, so I had to guess a little.

Also make sure you have clearance for it, since it does add a little bulk to it.

Other Thoughts: The cons, aren't really a problem for me. The amount of cooling for a little more noise is amazing. Two heatsinks, Two fans, and five heatpipes really do the job.

1 out of 1 people found this review helpful. Did you? Yes No

  • Michael W.
  • 10/22/2014 9:35:40 PM
  • Ownership: less than 1 day
  • Verified Owner

3 out of 5 eggsRAMsink adhesive completely unusable

Pros: Improved cooling over the stock cooler
At least it included thermal compound.

Cons: HORRIBLE instructions.
Completely unusable adhesive for the RAM heatsinks. I was forced to leave them off.

Other Thoughts: If you buy this, be sure to also buy some proper thermal adhesive. Otherwise you won't be able to install the RAMsinks.

0 out of 2 people found this review helpful. Did you? Yes No

5 out of 5 eggsAwesome Performance. Awesome Price.

Pros: + Absolutely spectacular performance over reference stock blower heatsink designs. I dropped 30 degrees at load and 20 at idle with fans at lowest speed. From 80 degrees at load to 50 and from 50 at idle to 30 idle on a GTX 680.

+ This even beats most 3rd party heatsinks by a decent measure, like Gigabyte's three fan configurations.

+ High board compatibility.

+ A LOT of peripheral heat sinks to satisfy most cards and situations.

+ The fans are UV reactive and look like bioluminescent blue jellyfish if you have a UV light. It actually looks pretty cool but then, how many times are you going to stick your head at the required angle to notice?

Cons: - Tedious installation but honestly, what do you expect?

- The thermal tape provided for the smaller heatsinks can be a little lackluster, but if installed correctly pose no problem. Here are some tips: Use 80% or higher isopropyl alcohol to clean the ram and vrm surfaces thoroughly, this is important as it evaporates faster and cleans better. Do one at a time, don't clean them all ahead of time. Put the heatsink tape on the heatsink FIRST and leave the last paper film on it while you gently but firmly rub the heatsink on a flat hard surface like a table or desk. Then apply it firmly to the ram or vrm chip. Don't fuss with it. Get it right the first time. Also be sure to plan where you're going to run the fan wires first, as they will knock the heatsinks off if you're not careful. If you're installing this on a GTX680 a heatpipe will hit one of the vram heatsinks, use the lowest profile heatsink included to avoid this issue.

If you do that they won't fall off. I did two lazily and they did indeed fall off just from gravity. Do it right and it's no problem. You just need patience. I prefer it this way since it works and you can remove them without damaging anything. It's a practical win-win.

- This is perhaps the most idiotic and dumb design decision on this heatsink and it's that the fans aren't PWM. They're missing the fourth wire so while you can plug it into your card you CAN'T control them through your card and they will run at a very noisy 100%. I absolutely HATE this. It's ALMOST a deal breaker for me, but if you have a spare fan plug on your motherboard you can control the speed that way. At low the fans are quiet, nearly silent. It's just infuriating that you have to do it this way and it can't dynamically be controlled by the card itself. But, at the huge performance gain you get with the heatsink, it's not really necessary to worry too much about the fans.

- The heatsink and fan alone takes up two extra slots. So it becomes a three slot card. It's difficult to know whether it's worth it or not as they don't offer a slimmer version, but given the results it's a concession worth having if you have the room to spare.

- Instructions leave quite a bit to be desired. They're not the worst I've seen but they're also not terribly helpful. When in doubt, watch a youtube video of someone installing one of these.

Other Thoughts: Despite a rather wordy Con list and a near dealbreaker fan situation I can't help but love this heatsink cooler. It just works and works extremely well if you install it properly. I also don't think it's difficult to install at all, just a little tedious but how else are you going to maintain a broad compatibility?

Ultimately, this is quieter than most stock fans and cools quite a bit better to boot. If you have a requirement for either, GET THIS. It's also worth remembering that graphics cards these days prefer to throttle performance rather than increase fan speeds so it's definitely worth have a cool card.

2 out of 2 people found this review helpful. Did you? Yes No

  • Jacob M.
  • 10/3/2014 6:10:14 PM
  • Ownership: 1 day to 1 week
  • Verified Owner

1 out of 5 eggsNot worth it.

Pros: The blue fans match my blue case fans.

Cons: Pain to install...separate heat sinks for each RAM chip.
Required parts had to be ordered separately. (I have an R9)
The biggest had minimal to no effect on the operating temp. over the stock fan.

0 out of 5 people found this review helpful. Did you? Yes No

  • Donald M.
  • 9/30/2014 12:36:58 AM
  • Ownership: 1 day to 1 week
  • Verified Owner

4 out of 5 eggsgood...but a pain to install

Pros: I consider my self a pretty tech-savvy person. However, being a frugal student, i picked up and oldie but goodie gtx 480 off craigslist, which at the beginning of 2014 was no 20 in gpu boss all-time score. video games substantially improved and gpu rendering with my 3930k @ 4.3 ghz improved as well. however, while doing a cuda render out of sorenson squeeze, this thing got like 90c

the gelid heatsink dropped that to about 68c, and gaming ran much lower too, about 60-64c. ambient usage was in the 30c-40c range.

Cons: i have never put in an aftermarket vga heatsink before. installing the vram heatsinks was a huge pain. it was tough to separate the thermal pads from the protective coating. i wasted a few due to fumbling with tthem and then used tweezers instead, using the few extra that came with it. extra thermal pads should be included. it took forever to install.

the diagram of where to put the mounting screws may tough to read on the instructions. best bet is to hit the website on your phone, assuming you will be upgrading your main/only pc.

the cooler itself was not tough to mount but should have been a bit less dustier upon arrival.

set aside an hour at least for vram heatsinks.

Other Thoughts: its well known that the gtx is an strong but power hungry and high temp card. under kombustor and furmark, it stays in the high 80s/ low 90s in terms of temperature. with the old heatsink on, it would hit the warning temp of 100 and i know for sure it would have just gone way further.

despite being a pain to install, it gets the job done.

0 out of 1 people found this review helpful. Did you? Yes No

  • Rylan G.
  • 8/24/2014 4:43:20 PM
  • Ownership: more than 1 year
  • Verified Owner

2 out of 5 eggsInstallation not fun

Pros: This is a good VGA cooler once installed. It dropped the temperatures of my card by a good 10-20 degrees C (depending on usage) from the stock cooler.

Cons: Installation is a pain. It requires you place individual heatsinks on certain components of your card, and these heatsinks do not directly tie into the cooler, they are free standing. Not the best situation, and a bit messy. Because the card sits upside down, these heatsinks would occasionally not bind tight enough and would eventually fall down into the large cooper heatsink of the cooler, thus you'd have to turn everything off, take it apart and put them back on. Taken altogether, I'd say it is more trouble than it is worth. Try a different cooler if you have the option of doing so.

1 out of 2 people found this review helpful. Did you? Yes No

Compare Offers from All Sellers newegg

Seller Name & Rating Offer Details  
ICON Loading...
Volume Discounts Available
  • 2-5 $54.79 ea.
  • 6-10 $54.49 ea.
  • 11+ $54.19 ea.

Send It As A Gift!

gift services details
Selected Items

Best Service Sellers

Are you an E-Blast Insider? Subscribe Newegg e-Blast
Shop without retyping payment details. Secure shopping made faster.
Check out with PayPal.
Home > 
Components > 
Fans & PC Cooling > 
VGA Cooling > 
GELID Solutions Ltd. > 
Item#: N82E16835426026
If the Adobe Reader does not appear when you click on a link for a PDF file, you can download Adobe Reader from the Adobe web site.